lkml.org 
[lkml]   [2022]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1] dt-bindings: dsp: mediatek: add mt8186 dsp document
From
On 22/04/2022 09:15, Tinghan Shen wrote:
> This patch adds mt8186 dsp document. The dsp is used for Sound Open
> Firmware driver node. It includes registers, clocks, memory regions,
> and mailbox for dsp.
>
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>
> This patch depends on MT8186 clock bindings.
> https://lore.kernel.org/all/20220409132251.31725-2-chun-jie.chen@mediatek.com/
>
> ---
> .../bindings/dsp/mediatek,mt8186-dsp.yaml | 93 +++++++++++++++++++
> 1 file changed, 93 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
>
> diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> new file mode 100644
> index 000000000000..00a79e880895
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek mt8186 DSP core
> +
> +maintainers:
> + - Tinghan Shen <tinghan.shen@mediatek.com>
> +
> +description: |
> + MediaTek mt8186 SoC contains a DSP core used for
> + advanced pre- and post- audio processing.
> +
> +properties:
> + compatible:
> + const: mediatek,mt8186-dsp
> +
> + reg:
> + items:
> + - description: Address and size of the DSP config registers
> + - description: Address and size of the DSP SRAM
> + - description: Address and size of the DSP secure registers
> + - description: Address and size of the DSP bus registers
> +
> + reg-names:
> + items:
> + - const: cfg
> + - const: sram
> + - const: sec
> + - const: bus
> +
> + clocks:
> + items:
> + - description: mux for audio dsp clock
> + - description: mux for audio dsp local bus
> +
> + clock-names:
> + items:
> + - const: audiodsp_sel
> + - const: adsp_bus_sel

What does the "sel" stands for? Maybe just skip the "_sel" suffixes?

> +
> + power-domains:
> + maxItems: 1
> +
> + mboxes:
> + items:
> + - description: ipc reply between host and audio DSP.
> + - description: ipc request between host and audio DSP.
> +
> + mbox-names:
> + items:
> + - const: mbox0
> + - const: mbox1

These should be rather some meaningful names, e.g. "rx" and "tx".

> +
> + memory-region:
> + items:
> + - description: dma buffer between host and DSP.
> + - description: DSP system memory.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - power-domains
> + - mbox-names
> + - mboxes
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>

You do not use these headers.

> + #include <dt-bindings/clock/mt8186-clk.h>
> + dsp@10680000 {



Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-04-22 17:51    [W:2.267 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site