Messages in this thread | | | Date | Fri, 22 Apr 2022 15:41:37 +0800 | Subject | Re: [PATCH v3 1/5] virtio-crypto: use private buffer for control request | From | Jason Wang <> |
| |
在 2022/4/21 18:40, zhenwei pi 写道: > Originally, all of the control requests share a single buffer( > ctrl & input & ctrl_status fields in struct virtio_crypto), this > allows queue depth 1 only, the performance of control queue gets > limited by this design. > > In this patch, each request allocates request buffer dynamically, and > free buffer after request, it's possible to optimize control queue > depth in the next step. > > A necessary comment is already in code, still describe it again: > /* > * Note: there are padding fields in request, clear them to zero before > * sending to host, > * Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48] > */ > So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request. > > Cc: Michael S. Tsirkin <mst@redhat.com> > Cc: Jason Wang <jasowang@redhat.com> > Cc: Gonglei <arei.gonglei@huawei.com> > Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> > --- > drivers/crypto/virtio/Makefile | 1 + > .../virtio/virtio_crypto_akcipher_algs.c | 90 ++++++------ > drivers/crypto/virtio/virtio_crypto_common.c | 39 +++++
Any reason we can't use virtio_crypto_core.c?
> drivers/crypto/virtio/virtio_crypto_common.h | 19 ++- > .../virtio/virtio_crypto_skcipher_algs.c | 133 ++++++++---------- > 5 files changed, 156 insertions(+), 126 deletions(-) > create mode 100644 drivers/crypto/virtio/virtio_crypto_common.c > > diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile > index bfa6cbae342e..49c1fa80e465 100644 > --- a/drivers/crypto/virtio/Makefile > +++ b/drivers/crypto/virtio/Makefile > @@ -3,5 +3,6 @@ obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio_crypto.o > virtio_crypto-objs := \ > virtio_crypto_skcipher_algs.o \ > virtio_crypto_akcipher_algs.o \ > + virtio_crypto_common.o \ > virtio_crypto_mgr.o \ > virtio_crypto_core.o > diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c > index f3ec9420215e..9561bc2df62b 100644 > --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c > +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c > @@ -102,8 +102,8 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher > { > struct scatterlist outhdr_sg, key_sg, inhdr_sg, *sgs[3]; > struct virtio_crypto *vcrypto = ctx->vcrypto; > + struct virtio_crypto_ctrl_request *vc_ctrl_req; > uint8_t *pkey; > - unsigned int inlen; > int err; > unsigned int num_out = 0, num_in = 0; > > @@ -111,98 +111,91 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher > if (!pkey) > return -ENOMEM; > > - spin_lock(&vcrypto->ctrl_lock); > - memcpy(&vcrypto->ctrl.header, header, sizeof(vcrypto->ctrl.header)); > - memcpy(&vcrypto->ctrl.u, para, sizeof(vcrypto->ctrl.u)); > - vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); > + if (!vc_ctrl_req) { > + err = -ENOMEM; > + goto out; > + } > > - sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + memcpy(&vc_ctrl_req->ctrl.header, header, sizeof(vc_ctrl_req->ctrl.header)); > + memcpy(&vc_ctrl_req->ctrl.u, para, sizeof(vc_ctrl_req->ctrl.u)); > + sg_init_one(&outhdr_sg, &vc_ctrl_req->ctrl, sizeof(vc_ctrl_req->ctrl)); > sgs[num_out++] = &outhdr_sg; > > sg_init_one(&key_sg, pkey, keylen); > sgs[num_out++] = &key_sg; > > - sg_init_one(&inhdr_sg, &vcrypto->input, sizeof(vcrypto->input)); > + vc_ctrl_req->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR);
Nit: if there's no special reason, let's move this after the above memcpys as what's done previously.
> + sg_init_one(&inhdr_sg, &vc_ctrl_req->input, sizeof(vc_ctrl_req->input)); > sgs[num_out + num_in++] = &inhdr_sg; > > - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); > + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req);
I'd split this into a separate patch.
> if (err < 0) > goto out; > > - virtqueue_kick(vcrypto->ctrl_vq); > - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && > - !virtqueue_is_broken(vcrypto->ctrl_vq)) > - cpu_relax(); > - > - if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { > + if (le32_to_cpu(vc_ctrl_req->input.status) != VIRTIO_CRYPTO_OK) { > + pr_err("virtio_crypto: Create session failed status: %u\n", > + le32_to_cpu(vc_ctrl_req->input.status)); > err = -EINVAL; > goto out; > }
Do we need a warning for -ENOMEM?
> > - ctx->session_id = le64_to_cpu(vcrypto->input.session_id); > + ctx->session_id = le64_to_cpu(vc_ctrl_req->input.session_id); > ctx->session_valid = true; > err = 0; > > out: > - spin_unlock(&vcrypto->ctrl_lock); > + kfree(vc_ctrl_req); > kfree_sensitive(pkey); > > - if (err < 0) > - pr_err("virtio_crypto: Create session failed status: %u\n", > - le32_to_cpu(vcrypto->input.status)); > - > return err; > } > > static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akcipher_ctx *ctx) > { > struct scatterlist outhdr_sg, inhdr_sg, *sgs[2]; > + struct virtio_crypto_ctrl_request *vc_ctrl_req; > struct virtio_crypto_destroy_session_req *destroy_session; > struct virtio_crypto *vcrypto = ctx->vcrypto; > - unsigned int num_out = 0, num_in = 0, inlen; > + unsigned int num_out = 0, num_in = 0; > int err; > > - spin_lock(&vcrypto->ctrl_lock); > - if (!ctx->session_valid) { > - err = 0; > - goto out; > - } > - vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; > - vcrypto->ctrl.header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); > - vcrypto->ctrl.header.queue_id = 0; > + if (!ctx->session_valid) > + return 0; > > - destroy_session = &vcrypto->ctrl.u.destroy_session; > + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); > + if (!vc_ctrl_req) > + return -ENOMEM; > + > + vc_ctrl_req->ctrl.header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); > + vc_ctrl_req->ctrl.header.queue_id = 0; > + > + destroy_session = &vc_ctrl_req->ctrl.u.destroy_session; > destroy_session->session_id = cpu_to_le64(ctx->session_id); > > - sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sg_init_one(&outhdr_sg, &vc_ctrl_req->ctrl, sizeof(vc_ctrl_req->ctrl)); > sgs[num_out++] = &outhdr_sg; > > - sg_init_one(&inhdr_sg, &vcrypto->ctrl_status.status, sizeof(vcrypto->ctrl_status.status)); > + vc_ctrl_req->ctrl_status.status = VIRTIO_CRYPTO_ERR;
If no special reason, let's move this above:
vc_ctrl_req->ctrl.header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION);
> + sg_init_one(&inhdr_sg, &vc_ctrl_req->ctrl_status.status, > + sizeof(vc_ctrl_req->ctrl_status.status)); > sgs[num_out + num_in++] = &inhdr_sg; > > - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); > + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); > if (err < 0) > goto out; > > - virtqueue_kick(vcrypto->ctrl_vq); > - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && > - !virtqueue_is_broken(vcrypto->ctrl_vq)) > - cpu_relax(); > - > - if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { > + if (vc_ctrl_req->ctrl_status.status != VIRTIO_CRYPTO_OK) { > err = -EINVAL; > + pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", > + vc_ctrl_req->ctrl_status.status, destroy_session->session_id); > goto out; > } > > err = 0; > ctx->session_valid = false; > - > out: > - spin_unlock(&vcrypto->ctrl_lock); > - if (err < 0) { > - pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", > - vcrypto->ctrl_status.status, destroy_session->session_id); > - } > + kfree(vc_ctrl_req); > > return err; > } > @@ -210,14 +203,11 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe > static int __virtio_crypto_akcipher_do_req(struct virtio_crypto_akcipher_request *vc_akcipher_req, > struct akcipher_request *req, struct data_queue *data_vq) > { > - struct virtio_crypto_akcipher_ctx *ctx = vc_akcipher_req->akcipher_ctx; > struct virtio_crypto_request *vc_req = &vc_akcipher_req->base; > - struct virtio_crypto *vcrypto = ctx->vcrypto; > struct virtio_crypto_op_data_req *req_data = vc_req->req_data; > struct scatterlist *sgs[4], outhdr_sg, inhdr_sg, srcdata_sg, dstdata_sg; > void *src_buf = NULL, *dst_buf = NULL; > unsigned int num_out = 0, num_in = 0; > - int node = dev_to_node(&vcrypto->vdev->dev); > unsigned long flags; > int ret = -ENOMEM; > bool verify = vc_akcipher_req->opcode == VIRTIO_CRYPTO_AKCIPHER_VERIFY; > @@ -228,7 +218,7 @@ static int __virtio_crypto_akcipher_do_req(struct virtio_crypto_akcipher_request > sgs[num_out++] = &outhdr_sg; > > /* src data */ > - src_buf = kcalloc_node(src_len, 1, GFP_KERNEL, node); > + src_buf = kcalloc(src_len, 1, GFP_KERNEL);
This seems not a relevant change. If it is a must we need use a separate for this and describe the rationale.
> if (!src_buf) > goto err; > > @@ -243,7 +233,7 @@ static int __virtio_crypto_akcipher_do_req(struct virtio_crypto_akcipher_request > sgs[num_out++] = &srcdata_sg; > > /* dst data */ > - dst_buf = kcalloc_node(req->dst_len, 1, GFP_KERNEL, node); > + dst_buf = kcalloc(req->dst_len, 1, GFP_KERNEL);
And this.
> if (!dst_buf) > goto err; > > diff --git a/drivers/crypto/virtio/virtio_crypto_common.c b/drivers/crypto/virtio/virtio_crypto_common.c > new file mode 100644 > index 000000000000..e65125a74db2 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_common.c > @@ -0,0 +1,39 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* Common functions and helpers > + * > + * Authors: zhenwei pi <pizhenwei@bytedance.com> > + * > + * Copyright 2022 Bytedance CO., LTD. > + */ > + > +#include "virtio_crypto_common.h" > + > +int virtio_crypto_ctrl_vq_request(struct virtio_crypto *vcrypto, struct scatterlist *sgs[], > + unsigned int out_sgs, unsigned int in_sgs, > + struct virtio_crypto_ctrl_request *vc_ctrl_req) > +{ > + int err; > + unsigned int inlen; > + unsigned long flags; > + > + spin_lock_irqsave(&vcrypto->ctrl_lock, flags); > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, out_sgs, in_sgs, vc_ctrl_req, GFP_ATOMIC); > + if (err < 0) { > + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); > + return err; > + } > + > + virtqueue_kick(vcrypto->ctrl_vq); > + > + /* > + * Trapping into the hypervisor, so the request should be > + * handled immediately. > + */ > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > + cpu_relax(); > + > + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); > + > + return 0; > +} > diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h > index e693d4ee83a6..d2a20fe6e13e 100644 > --- a/drivers/crypto/virtio/virtio_crypto_common.h > +++ b/drivers/crypto/virtio/virtio_crypto_common.h > @@ -13,6 +13,7 @@ > #include <crypto/aead.h> > #include <crypto/aes.h> > #include <crypto/engine.h> > +#include <uapi/linux/virtio_crypto.h> > > > /* Internal representation of a data virtqueue */ > @@ -65,11 +66,6 @@ struct virtio_crypto { > /* Maximum size of per request */ > u64 max_size; > > - /* Control VQ buffers: protected by the ctrl_lock */ > - struct virtio_crypto_op_ctrl_req ctrl; > - struct virtio_crypto_session_input input; > - struct virtio_crypto_inhdr ctrl_status; > - > unsigned long status; > atomic_t ref_count; > struct list_head list; > @@ -85,6 +81,16 @@ struct virtio_crypto_sym_session_info { > __u64 session_id; > }; > > +/* > + * Note: there are padding fields in request, clear them to zero before sending to host, > + * Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48] > + */ > +struct virtio_crypto_ctrl_request { > + struct virtio_crypto_op_ctrl_req ctrl; > + struct virtio_crypto_session_input input; > + struct virtio_crypto_inhdr ctrl_status; > +}; > + > struct virtio_crypto_request; > typedef void (*virtio_crypto_data_callback) > (struct virtio_crypto_request *vc_req, int len); > @@ -135,4 +141,7 @@ void virtio_crypto_skcipher_algs_unregister(struct virtio_crypto *vcrypto); > int virtio_crypto_akcipher_algs_register(struct virtio_crypto *vcrypto); > void virtio_crypto_akcipher_algs_unregister(struct virtio_crypto *vcrypto); > > +int virtio_crypto_ctrl_vq_request(struct virtio_crypto *vcrypto, struct scatterlist *sgs[], > + unsigned int out_sgs, unsigned int in_sgs, > + struct virtio_crypto_ctrl_request *vc_ctrl_req); > #endif /* _VIRTIO_CRYPTO_COMMON_H */ > diff --git a/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c > index a618c46a52b8..fef355ff461c 100644 > --- a/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c > +++ b/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c > @@ -118,11 +118,13 @@ static int virtio_crypto_alg_skcipher_init_session( > int encrypt) > { > struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; > - unsigned int tmp; > struct virtio_crypto *vcrypto = ctx->vcrypto;
Can we simply rename this to virtcrypto and then we can use the name "vcrypto" for virtio_crypto_ctrl_request then we save tons lot changes?
It simplify the life of reviewers and backporting.
Thanks
> int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : VIRTIO_CRYPTO_OP_DECRYPT; > int err; > unsigned int num_out = 0, num_in = 0; > + struct virtio_crypto_ctrl_request *vc_ctrl_req; > + struct virtio_crypto_ctrl_header *header; > + struct virtio_crypto_sym_create_session_req *sym_create_session; > > /* > * Avoid to do DMA from the stack, switch to using > @@ -133,26 +135,27 @@ static int virtio_crypto_alg_skcipher_init_session( > if (!cipher_key) > return -ENOMEM; > > - spin_lock(&vcrypto->ctrl_lock); > + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); > + if (!vc_ctrl_req) { > + err = -ENOMEM; > + goto out; > + } > + > /* Pad ctrl header */ > - vcrypto->ctrl.header.opcode = > - cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); > - vcrypto->ctrl.header.algo = cpu_to_le32(alg); > + header = &vc_ctrl_req->ctrl.header; > + header->opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); > + header->algo = cpu_to_le32(alg); > /* Set the default dataqueue id to 0 */ > - vcrypto->ctrl.header.queue_id = 0; > + header->queue_id = 0; > > - vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > /* Pad cipher's parameters */ > - vcrypto->ctrl.u.sym_create_session.op_type = > - cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > - vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = > - vcrypto->ctrl.header.algo; > - vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = > - cpu_to_le32(keylen); > - vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = > - cpu_to_le32(op); > - > - sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sym_create_session = &vc_ctrl_req->ctrl.u.sym_create_session; > + sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > + sym_create_session->u.cipher.para.algo = header->algo; > + sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen); > + sym_create_session->u.cipher.para.op = cpu_to_le32(op); > + > + sg_init_one(&outhdr, &vc_ctrl_req->ctrl, sizeof(vc_ctrl_req->ctrl)); > sgs[num_out++] = &outhdr; > > /* Set key */ > @@ -160,45 +163,34 @@ static int virtio_crypto_alg_skcipher_init_session( > sgs[num_out++] = &key_sg; > > /* Return status and session id back */ > - sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); > + vc_ctrl_req->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > + sg_init_one(&inhdr, &vc_ctrl_req->input, sizeof(vc_ctrl_req->input)); > sgs[num_out + num_in++] = &inhdr; > > - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > - num_in, vcrypto, GFP_ATOMIC); > - if (err < 0) { > - spin_unlock(&vcrypto->ctrl_lock); > - kfree_sensitive(cipher_key); > - return err; > - } > - virtqueue_kick(vcrypto->ctrl_vq); > - > - /* > - * Trapping into the hypervisor, so the request should be > - * handled immediately. > - */ > - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > - !virtqueue_is_broken(vcrypto->ctrl_vq)) > - cpu_relax(); > + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); > + if (err < 0) > + goto out; > > - if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { > - spin_unlock(&vcrypto->ctrl_lock); > + if (le32_to_cpu(vc_ctrl_req->input.status) != VIRTIO_CRYPTO_OK) { > pr_err("virtio_crypto: Create session failed status: %u\n", > - le32_to_cpu(vcrypto->input.status)); > - kfree_sensitive(cipher_key); > - return -EINVAL; > + le32_to_cpu(vc_ctrl_req->input.status)); > + err = -EINVAL; > + goto out; > } > > if (encrypt) > ctx->enc_sess_info.session_id = > - le64_to_cpu(vcrypto->input.session_id); > + le64_to_cpu(vc_ctrl_req->input.session_id); > else > ctx->dec_sess_info.session_id = > - le64_to_cpu(vcrypto->input.session_id); > - > - spin_unlock(&vcrypto->ctrl_lock); > + le64_to_cpu(vc_ctrl_req->input.session_id); > > + err = 0; > +out: > + kfree(vc_ctrl_req); > kfree_sensitive(cipher_key); > - return 0; > + > + return err; > } > > static int virtio_crypto_alg_skcipher_close_session( > @@ -206,21 +198,24 @@ static int virtio_crypto_alg_skcipher_close_session( > int encrypt) > { > struct scatterlist outhdr, status_sg, *sgs[2]; > - unsigned int tmp; > struct virtio_crypto_destroy_session_req *destroy_session; > struct virtio_crypto *vcrypto = ctx->vcrypto; > int err; > unsigned int num_out = 0, num_in = 0; > + struct virtio_crypto_ctrl_request *vc_ctrl_req; > + struct virtio_crypto_ctrl_header *header; > + > + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); > + if (!vc_ctrl_req) > + return -ENOMEM; > > - spin_lock(&vcrypto->ctrl_lock); > - vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; > /* Pad ctrl header */ > - vcrypto->ctrl.header.opcode = > - cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); > + header = &vc_ctrl_req->ctrl.header; > + header->opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); > /* Set the default virtqueue id to 0 */ > - vcrypto->ctrl.header.queue_id = 0; > + header->queue_id = 0; > > - destroy_session = &vcrypto->ctrl.u.destroy_session; > + destroy_session = &vc_ctrl_req->ctrl.u.destroy_session; > > if (encrypt) > destroy_session->session_id = > @@ -229,37 +224,33 @@ static int virtio_crypto_alg_skcipher_close_session( > destroy_session->session_id = > cpu_to_le64(ctx->dec_sess_info.session_id); > > - sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sg_init_one(&outhdr, &vc_ctrl_req->ctrl, sizeof(vc_ctrl_req->ctrl)); > sgs[num_out++] = &outhdr; > > /* Return status and session id back */ > - sg_init_one(&status_sg, &vcrypto->ctrl_status.status, > - sizeof(vcrypto->ctrl_status.status)); > + vc_ctrl_req->ctrl_status.status = VIRTIO_CRYPTO_ERR; > + sg_init_one(&status_sg, &vc_ctrl_req->ctrl_status.status, > + sizeof(vc_ctrl_req->ctrl_status.status)); > sgs[num_out + num_in++] = &status_sg; > > - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > - num_in, vcrypto, GFP_ATOMIC); > - if (err < 0) { > - spin_unlock(&vcrypto->ctrl_lock); > - return err; > - } > - virtqueue_kick(vcrypto->ctrl_vq); > - > - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > - !virtqueue_is_broken(vcrypto->ctrl_vq)) > - cpu_relax(); > + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); > + if (err < 0) > + goto out; > > - if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { > - spin_unlock(&vcrypto->ctrl_lock); > + if (vc_ctrl_req->ctrl_status.status != VIRTIO_CRYPTO_OK) { > pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", > - vcrypto->ctrl_status.status, > + vc_ctrl_req->ctrl_status.status, > destroy_session->session_id); > > - return -EINVAL; > + err = -EINVAL; > + goto out; > } > - spin_unlock(&vcrypto->ctrl_lock); > > - return 0; > + err = 0; > +out: > + kfree(vc_ctrl_req); > + > + return err; > } > > static int virtio_crypto_alg_skcipher_init_sessions(
| |