lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3] drm/gma500: depend on framebuffer
From
Hi

Am 21.04.22 um 14:54 schrieb Patrik Jakobsson:
> On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas
> <javierm@redhat.com> wrote:
>>
>> Hello Patrik,
>>
>> On 4/21/22 14:39, Patrik Jakobsson wrote:
>>> On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>>>
>>>> Hi
>>>>
>>>> Am 09.04.22 um 06:23 schrieb James Hilliard:
>>>>> Select the efi framebuffer if efi is enabled.
>>>>>
>>>>> This appears to be needed for video output to function correctly.
>>>>>
>>>>> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
>>>>> ---
>>>>> Changes v2 -> v3:
>>>>> - select EFI_FB instead of depending on it
>>>>> Changes v1 -> v2:
>>>>> - use depends instead of select
>>>>> ---
>>>>> drivers/gpu/drm/gma500/Kconfig | 2 ++
>>>>> 1 file changed, 2 insertions(+)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
>>>>> index 0cff20265f97..a422fa84d53b 100644
>>>>> --- a/drivers/gpu/drm/gma500/Kconfig
>>>>> +++ b/drivers/gpu/drm/gma500/Kconfig
>>>>> @@ -2,11 +2,13 @@
>>>>> config DRM_GMA500
>>>>> tristate "Intel GMA500/600/3600/3650 KMS Framebuffer"
>>>>> depends on DRM && PCI && X86 && MMU
>>>>> + depends on FB
>>>>
>>>> Why do we need FB here? Framebuffer support should be hidden by DRM's
>>>> fbdev helpers.
>>>
>>> It is not needed but gives him video output since it enables the drm
>>> fbdev emulation.
>>>
>>
>> I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?

It has to be selected separately in .config.

James, make sure you have DRM_FBDEV_EMULATION enabled in your kernel's
.config file if you want a console. however, Weston should work without
it. How do you start weston without a console?

>
> No, it shouldn't depend on any FBDEV stuff since it's not actually
> required. It just happens to help in this case since weston + fbdev
> backend works but not weston with drm backend (or whatever config
> James have set).
>
>>
>>> I looked some more at the logs and it seems weston doesn't work on his
>>> system without the fbdev backend. So the question is why weston isn't
>>> working without fbdev? Perhaps this is just a Weston configuration
>>> issue?
>>>
>>
>> But is weston using the fbdev emulated by DRM or the one registered by
>> efifb? I thought that the latter from what was mentioned in this thread.
>
> It's using drm fbdev emulation with gma500 so EFIFB has nothing to do
> with this. I believe it was just simply incorrectly reported. If I'm
> correct then "depends on FB" is what makes video output work for
> James.

There's an fbdev backend for weston, but the provided logs don't look as
if it's using this. Maybe the connector's modes are never probed
correctly without fbdev.

James, could you provide a logfile for weston? (i.e., 'weston
--log=weston.txt').

Best regards
Thomas

>
>>
>> --
>> Best regards,
>>
>> Javier Martinez Canillas
>> Linux Engineering
>> Red Hat
>>

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-04-21 15:22    [W:0.130 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site