lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] drivers: usb: host: fix NULL pointer dereferences triggered by unhandled errors in xhci_create_rhub_port_array()
On Thu, Apr 21, 2022 at 8:50 PM Mathias Nyman
<mathias.nyman@linux.intel.com> wrote:
>
> On 21.4.2022 15.21, Fu Zixuan wrote:
> > On Thu, 21 Apr 2022 at 20:06, Greg KH <gregkh@linuxfoundation.org> wrote:
> >>
> >> On Thu, Apr 21, 2022 at 07:55:28PM +0800, Fu Zixuan wrote:
> >>> On Thu, 21 Apr 2022 at 18:07, Greg KH <gregkh@linuxfoundation.org> wrote:
> >>>>
> >>>> On Thu, Apr 21, 2022 at 05:42:36PM +0800, Zixuan Fu wrote:
> >>>>> In xhci_create_rhub_port_array(), when rhub->num_ports is zero,
> >>>>> rhub->ports would not be set; when kcalloc_node() fails, rhub->ports
> >>>>> would be set to NULL. In these two cases, xhci_create_rhub_port_array()
> >>>>> just returns void, and thus its callers are unaware of the error.
> >>>>>
> >>>>> Then rhub->ports is dereferenced in xhci_usb3_hub_descriptor() or
> >>>>> xhci_usb2_hub_descriptor().
> >>>>>
> >>>>> To fix the bug, xhci_setup_port_arrays() should return an integer to
> >>>>> indicate a possible error, and its callers should handle the error.
> >>>>>
> >>>>> Here is the log when this bug occurred in our fault-injection testing:
> >>>>>
> >>>>> [ 24.001309] BUG: kernel NULL pointer dereference, address: 0000000000000000
> >>>>> ...
> >>>>> [ 24.003992] RIP: 0010:xhci_hub_control+0x3f5/0x60d0 [xhci_hcd]
> >>>>> ...
> >>>>> [ 24.009803] Call Trace:
> >>>>> [ 24.010014] <TASK>
> >>>>> [ 24.011310] usb_hcd_submit_urb+0x1233/0x1fd0
> >>>>> [ 24.017071] usb_start_wait_urb+0x115/0x310
> >>>>> [ 24.017641] usb_control_msg+0x28a/0x450
> >>>>> [ 24.019046] hub_probe+0xb16/0x2320
> >>>>> [ 24.019757] usb_probe_interface+0x4f1/0x930
> >>>>> [ 24.019765] really_probe+0x33d/0x970
> >>>>> [ 24.019768] __driver_probe_device+0x157/0x210
> >>>>> [ 24.019772] driver_probe_device+0x4f/0x340
> >>>>> [ 24.019775] __device_attach_driver+0x2ee/0x3a0
> >>>>> ...
> >>>>>
> >>>>> Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
> >>>>> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
> >>>>> ---
> >>>>> drivers/usb/host/xhci-mem.c | 17 ++++++++++++-----
> >>>>> 1 file changed, 12 insertions(+), 5 deletions(-)
> >>>>>
> >>>>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> >>>>> index bbb27ee2c6a3..024515346c39 100644
> >>>>> --- a/drivers/usb/host/xhci-mem.c
> >>>>> +++ b/drivers/usb/host/xhci-mem.c
> >>>>> @@ -2235,7 +2235,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
> >>>>> /* FIXME: Should we disable ports not in the Extended Capabilities? */
> >>>>> }
> >>>>>
> >>>>> -static void xhci_create_rhub_port_array(struct xhci_hcd *xhci,
> >>>>> +static int xhci_create_rhub_port_array(struct xhci_hcd *xhci,
> >>>>> struct xhci_hub *rhub, gfp_t flags)
> >>>>> {
> >>>>> int port_index = 0;
> >>>>> @@ -2243,11 +2243,11 @@ static void xhci_create_rhub_port_array(struct xhci_hcd *xhci,
> >>>>> struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
> >>>>>
> >>>>> if (!rhub->num_ports)
> >>>>> - return;
> >>>>> + return -EINVAL;
> >>>>> rhub->ports = kcalloc_node(rhub->num_ports, sizeof(*rhub->ports),
> >>>>> flags, dev_to_node(dev));
> >>>>> if (!rhub->ports)
> >>>>> - return;
> >>>>> + return -ENOMEM;
> >>>>>
> >>>>> for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
> >>>>> if (xhci->hw_ports[i].rhub != rhub ||
> >>>>> @@ -2259,6 +2259,7 @@ static void xhci_create_rhub_port_array(struct xhci_hcd *xhci,
> >>>>> if (port_index == rhub->num_ports)
> >>>>> break;
> >>>>> }
> >>>>> + return 0;
> >>>>> }
> >>>>>
> >>>>> /*
> >>>>> @@ -2277,6 +2278,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
> >>>>> int cap_count = 0;
> >>>>> u32 cap_start;
> >>>>> struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
> >>>>> + int ret;
> >>>>>
> >>>>> num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
> >>>>> xhci->hw_ports = kcalloc_node(num_ports, sizeof(*xhci->hw_ports),
> >>>>> @@ -2367,8 +2369,13 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
> >>>>> * Not sure how the USB core will handle a hub with no ports...
> >>>>> */
> >>>>>
> >>>>> - xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags);
> >>>>> - xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags);
> >>>>> + ret = xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags);
> >>>>> + if (ret)
> >>>>> + return ret;
> >>>>> +
> >>>>> + ret = xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags);
> >>>>> + if (ret)
> >>>>> + return ret;
> >>>>
> >>>> What about the memory allocated by the first call to
> >>>> xhci_create_rhub_port_array()? Is that now lost? Same for everything
> >>>> else allocated before these calls, how is that cleaned up properly?
> >>>>
> >>>> thanks,
> >>>>
> >>>> greg k-h
> >>>
> >>> Thanks for your swift reply. We understand your concern. In fact, we have
> >>> checked the related code carefully and found that xhci_create_rhub_port_array()
> >>> is only used in xhci_setup_port_arrays(). Moreover, only xhci_mem_init() calls
> >>> xhci_setup_port_arrays() and does all cleanup work when it fails. Specifically,
> >>> xhci_mem_init() calls xhci_mem_cleanup(), which eventually called
> >>> kfree(xhci->usb2_rhub.ports) and kfree(xhci->usb3_rhub.ports).
> >>
> >> Great, can you mention this in the changelog text to show that you have
> >> thought this through and it can be documented as such?
> >>
> >> thanks,
> >>
> >> greg k-h
> >
> > Thanks for your reply! We will do that and submit the patch v2 soon.
> >
>
> Good to get this fixed, but there's a series by Heiner Kallweit that adds support
> for xHC controllers with just one roothub [1].
> It will conflict with this.
>
> We might need to change this a bit so that this can go to stable alone, but still
> being being able to somewhat neatly apply that new series on top of this.
>
> 1. https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=for-usb-next
>
> Thanks
> -Mathias

No problem! We will submit our patch on that branch.

Thanks,

Zixuan Fu

\
 
 \ /
  Last update: 2022-04-21 15:11    [W:0.183 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site