lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V2 0/3] riscv: atomic: Optimize AMO instructions usage
On Thu, Apr 21, 2022 at 05:39:09PM +0800, Guo Ren wrote:
> Hi Dan,
>
> On Thu, Apr 21, 2022 at 1:03 AM Dan Lustig <dlustig@nvidia.com> wrote:
> >
> > On 4/20/2022 1:33 AM, Guo Ren wrote:
> > > Thx Dan,
> > >
> > > On Wed, Apr 20, 2022 at 1:12 AM Dan Lustig <dlustig@nvidia.com> wrote:
> > >>
> > >> On 4/17/2022 12:51 AM, Guo Ren wrote:
> > >>> Hi Boqun & Andrea,
> > >>>
> > >>> On Sun, Apr 17, 2022 at 10:26 AM Boqun Feng <boqun.feng@gmail.com> wrote:
> > >>>>
> > >>>> On Sun, Apr 17, 2022 at 12:49:44AM +0800, Guo Ren wrote:
> > >>>> [...]
> > >>>>>
> > >>>>> If both the aq and rl bits are set, the atomic memory operation is
> > >>>>> sequentially consistent and cannot be observed to happen before any
> > >>>>> earlier memory operations or after any later memory operations in the
> > >>>>> same RISC-V hart and to the same address domain.
> > >>>>> "0: lr.w %[p], %[c]\n"
> > >>>>> " sub %[rc], %[p], %[o]\n"
> > >>>>> " bltz %[rc], 1f\n".
> > >>>>> - " sc.w.rl %[rc], %[rc], %[c]\n"
> > >>>>> + " sc.w.aqrl %[rc], %[rc], %[c]\n"
> > >>>>> " bnez %[rc], 0b\n"
> > >>>>> - " fence rw, rw\n"
> > >>>>> "1:\n"
> > >>>>> So .rl + fence rw, rw is over constraints, only using sc.w.aqrl is more proper.
> > >>>>>
> > >>>>
> > >>>> Can .aqrl order memory accesses before and after it (not against itself,
> > >>>> against each other), i.e. act as a full memory barrier? For example, can
> > >>> From the RVWMO spec description, the .aqrl annotation appends the same
> > >>> effect with "fence rw, rw" to the AMO instruction, so it's RCsc.
> > >>>
> > >>> Not only .aqrl, and I think the below also could be an RCsc when
> > >>> sc.w.aq is executed:
> > >>> A: Pre-Access
> > >>> B: lr.w.rl ADDR-0
> > >>> ...
> > >>> C: sc.w.aq ADDR-0
> > >>> D: Post-Acess
> > >>> Because sc.w.aq has overlap address & data dependency on lr.w.rl, the
> > >>> global memory order should be A->B->C->D when sc.w.aq is executed. For
> > >>> the amoswap
> > >>
> > >> These opcodes aren't actually meaningful, unfortunately.
> > >>
> > >> Quoting the ISA manual chapter 10.2: "Software should not set the rl bit
> > >> on an LR instruction unless the aq bit is also set, nor should software
> > >> set the aq bit on an SC instruction unless the rl bit is also set."
> > > 1. Oh, I've missed the behind half of the ISA manual. But why can't we
> > > utilize lr.rl & sc.aq in software programming to guarantee the
> > > sequence?
> >
> > lr.aq and sc.rl map more naturally to hardware than lr.rl and sc.aq.
> > Plus, they just aren't common operations to begin with, e.g., there
> > is no smp_store_acquire() or smp_load_release(), nor are there
> > equivalents in C/C++ atomics.
> First, thx for pointing out that my patch violates the rules defined
> in the ISA manual. I've abandoned these parts in v3.
>
> It's easy to let hw support lr.rl & sc.aq (eg: our hardware supports
> them). I agree there are no equivalents in C/C++ atomics. But they are
> useful for LR/SC pairs to implement atomic_acqurie/release semantics.
> Compare below:
> A): fence rw, r; lr
> B): lr.rl
> The A has another "fence ,r" effect in semantics, it's over commit
> from a software design view.
>
> ps: Current definition has problems:
> #define RISCV_ACQUIRE_BARRIER "\tfence r , rw\n"
> #define RISCV_RELEASE_BARRIER "\tfence rw, w\n"
>
> #define __cmpxchg_release(ptr, old, new, size) \
> ...
> __asm__ __volatile__ ( \
> RISCV_RELEASE_BARRIER \
> "0: lr.w %0, %2\n" \
>
> That means "fence rw, w" can't prevent lr.w beyond the fence, we need
> a "fence.rw. r" here. Here is the Fixup patch which I'm preparing:
>

That's not true. Note that RELEASE semantics only applies to the
write/store part of a read-modify-write atomic, similarly, ACQUIRE only
applies to the read/load part. For example, the following litmus test
can observe the exists clause being true.

{}

P0(int *x, int *y)
{
int r0;
int r1;

r0 = cmpxchg_acquire(x, 0, 1);
r1 = READ_ONCE(*y);
}

P1(int *x, int *y)
{
int r0;

WRITE_ONCE(*y, 1);
smp_mb();
r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 0:r1=0 /\ 1:r0=0)

Regards,
Boqun

> From 14c93aca0c3b10cf134791cf491b459972a36ec4 Mon Sep 17 00:00:00 2001
> From: Guo Ren <guoren@linux.alibaba.com>
> Date: Thu, 21 Apr 2022 16:44:48 +0800
> Subject: [PATCH] riscv: atomic: Fixup wrong __atomic_acquire/release_fence
> implementation
>
> Current RISCV_ACQUIRE/RELEASE_BARRIER is for spin_lock not atomic.
>
> __cmpxchg_release(ptr, old, new, size)
> ...
> __asm__ __volatile__ (
> RISCV_RELEASE_BARRIER
> "0: lr.w %0, %2\n"
>
> The "fence rw, w -> lr.w" is invalid and lr would beyond fence, so
> we need "fence rw, r -> lr.w" here. Atomic acquire is the same.
>
> Fixes: 0123f4d76ca6 ("riscv/spinlock: Strengthen implementations with fences")
> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> Signed-off-by: Guo Ren <guoren@kernel.org>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Andrea Parri <parri.andrea@gmail.com>
> Cc: Dan Lustig <dlustig@nvidia.com>
> Cc: stable@vger.kernel.org
> ---
> arch/riscv/include/asm/atomic.h | 4 ++--
> arch/riscv/include/asm/cmpxchg.h | 8 ++++----
> arch/riscv/include/asm/fence.h | 4 ++++
> 3 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
> index aef8aa9ac4f4..7cd66eba6ec3 100644
> --- a/arch/riscv/include/asm/atomic.h
> +++ b/arch/riscv/include/asm/atomic.h
> @@ -20,10 +20,10 @@
> #include <asm/barrier.h>
>
> #define __atomic_acquire_fence() \
> - __asm__ __volatile__(RISCV_ACQUIRE_BARRIER "" ::: "memory")
> + __asm__ __volatile__(RISCV_ATOMIC_ACQUIRE_BARRIER "":::"memory")
>
> #define __atomic_release_fence() \
> - __asm__ __volatile__(RISCV_RELEASE_BARRIER "" ::: "memory");
> + __asm__ __volatile__(RISCV_ATOMIC_RELEASE_BARRIER"" ::: "memory");
>
> static __always_inline int arch_atomic_read(const atomic_t *v)
> {
> diff --git a/arch/riscv/include/asm/cmpxchg.h b/arch/riscv/include/asm/cmpxchg.h
> index 9269fceb86e0..605edc2fca3b 100644
> --- a/arch/riscv/include/asm/cmpxchg.h
> +++ b/arch/riscv/include/asm/cmpxchg.h
> @@ -217,7 +217,7 @@
> " bne %0, %z3, 1f\n" \
> " sc.w %1, %z4, %2\n" \
> " bnez %1, 0b\n" \
> - RISCV_ACQUIRE_BARRIER \
> + RISCV_ATOMIC_ACQUIRE_BARRIER \
> "1:\n" \
> : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \
> : "rJ" ((long)__old), "rJ" (__new) \
> @@ -229,7 +229,7 @@
> " bne %0, %z3, 1f\n" \
> " sc.d %1, %z4, %2\n" \
> " bnez %1, 0b\n" \
> - RISCV_ACQUIRE_BARRIER \
> + RISCV_ATOMIC_ACQUIRE_BARRIER \
> "1:\n" \
> : "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr) \
> : "rJ" (__old), "rJ" (__new) \
> @@ -259,7 +259,7 @@
> switch (size) { \
> case 4: \
> __asm__ __volatile__ ( \
> - RISCV_RELEASE_BARRIER \
> + RISCV_ATOMIC_RELEASE_BARRIER \
> "0: lr.w %0, %2\n" \
> " bne %0, %z3, 1f\n" \
> " sc.w %1, %z4, %2\n" \
> @@ -271,7 +271,7 @@
> break; \
> case 8: \
> __asm__ __volatile__ ( \
> - RISCV_RELEASE_BARRIER \
> + RISCV_ATOMIC_RELEASE_BARRIER \
> "0: lr.d %0, %2\n" \
> " bne %0, %z3, 1f\n" \
> " sc.d %1, %z4, %2\n" \
> diff --git a/arch/riscv/include/asm/fence.h b/arch/riscv/include/asm/fence.h
> index 2b443a3a487f..4e446d64f04f 100644
> --- a/arch/riscv/include/asm/fence.h
> +++ b/arch/riscv/include/asm/fence.h
> @@ -4,9 +4,13 @@
> #ifdef CONFIG_SMP
> #define RISCV_ACQUIRE_BARRIER "\tfence r , rw\n"
> #define RISCV_RELEASE_BARRIER "\tfence rw, w\n"
> +#define RISCV_ATOMIC_ACQUIRE_BARRIER "\tfence w , rw\n"
> +#define RISCV_ATOMIC_RELEASE_BARRIER "\tfence rw, r\n"
> #else
> #define RISCV_ACQUIRE_BARRIER
> #define RISCV_RELEASE_BARRIER
> +#define RISCV_ATOMIC_ACQUIRE_BARRIER
> +#define RISCV_ATOMIC_RELEASE_BARRIER
> #endif
>
> #endif /* _ASM_RISCV_FENCE_H */
>
>
> >
> > > 2. Using .aqrl to replace the fence rw, rw is okay to ISA manual,
> > > right? And reducing a fence instruction to gain better performance:
> > > "0: lr.w %[p], %[c]\n"
> > > " sub %[rc], %[p], %[o]\n"
> > > " bltz %[rc], 1f\n".
> > > - " sc.w.rl %[rc], %[rc], %[c]\n"
> > > + " sc.w.aqrl %[rc], %[rc], %[c]\n"
> > > " bnez %[rc], 0b\n"
> > > - " fence rw, rw\n"
> >
> > Yes, using .aqrl is valid.
> Thx and I think the below is also valid, right?
>
> - RISCV_RELEASE_BARRIER \
> - " amoswap.w %0, %2, %1\n" \
> + " amoswap.w.rl %0, %2, %1\n" \
>
> - " amoswap.d %0, %2, %1\n" \
> - RISCV_ACQUIRE_BARRIER \
> + " amoswap.d.aq %0, %2, %1\n" \
>
> >
> > Dan
> >
> > >>
> > >> Dan
> > >>
> > >>> The purpose of the whole patchset is to reduce the usage of
> > >>> independent fence rw, rw instructions, and maximize the usage of the
> > >>> .aq/.rl/.aqrl aonntation of RISC-V.
> > >>>
> > >>> __asm__ __volatile__ ( \
> > >>> "0: lr.w %0, %2\n" \
> > >>> " bne %0, %z3, 1f\n" \
> > >>> " sc.w.rl %1, %z4, %2\n" \
> > >>> " bnez %1, 0b\n" \
> > >>> " fence rw, rw\n" \
> > >>> "1:\n" \
> > >>>
> > >>>> we end up with u == 1, v == 1, r1 on P0 is 0 and r1 on P1 is 0, for the
> > >>>> following litmus test?
> > >>>>
> > >>>> C lr-sc-aqrl-pair-vs-full-barrier
> > >>>>
> > >>>> {}
> > >>>>
> > >>>> P0(int *x, int *y, atomic_t *u)
> > >>>> {
> > >>>> int r0;
> > >>>> int r1;
> > >>>>
> > >>>> WRITE_ONCE(*x, 1);
> > >>>> r0 = atomic_cmpxchg(u, 0, 1);
> > >>>> r1 = READ_ONCE(*y);
> > >>>> }
> > >>>>
> > >>>> P1(int *x, int *y, atomic_t *v)
> > >>>> {
> > >>>> int r0;
> > >>>> int r1;
> > >>>>
> > >>>> WRITE_ONCE(*y, 1);
> > >>>> r0 = atomic_cmpxchg(v, 0, 1);
> > >>>> r1 = READ_ONCE(*x);
> > >>>> }
> > >>>>
> > >>>> exists (u=1 /\ v=1 /\ 0:r1=0 /\ 1:r1=0)
> > >>> I think my patchset won't affect the above sequence guarantee. Current
> > >>> RISC-V implementation only gives RCsc when the original value is the
> > >>> same at least once. So I prefer RISC-V cmpxchg should be:
> > >>>
> > >>>
> > >>> - "0: lr.w %0, %2\n" \
> > >>> + "0: lr.w.rl %0, %2\n" \
> > >>> " bne %0, %z3, 1f\n" \
> > >>> " sc.w.rl %1, %z4, %2\n" \
> > >>> " bnez %1, 0b\n" \
> > >>> - " fence rw, rw\n" \
> > >>> "1:\n" \
> > >>> + " fence w, rw\n" \
> > >>>
> > >>> To give an unconditional RSsc for atomic_cmpxchg.
> > >>>
> > >>>>
> > >>>> Regards,
> > >>>> Boqun
> > >>>
> > >>>
> > >>>
> > >
> > >
> > >
>
>
>
> --
> Best Regards
> Guo Ren
>
> ML: https://lore.kernel.org/linux-csky/
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-04-22 00:56    [W:0.823 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site