lkml.org 
[lkml]   [2022]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 26/41] ARM: omap1: relocate static I/O mapping
Hi,

On Tue, Apr 19, 2022 at 03:37:08PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The address range 0xfee00000-0xfeffffff is used for PCI and
> PCMCIA I/O port mappings, but OMAP1 has its static mappings
> there as well.
>
> Move the OMAP1 addresses a little higher to avoid crashing
> at boot.

This has the same problem I reported in 2019, with earlyprintk the
system no longer boots:

https://marc.info/?t=156530014200005&r=1&w=2

Tested on OSK and SX1/qemu.

A.

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/Kconfig.debug | 6 +++---
> arch/arm/mach-omap1/include/mach/hardware.h | 2 +-
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 0c9497d549e3..f57b449000f7 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1837,9 +1837,9 @@ config DEBUG_UART_VIRT
> default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
> default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
> default 0xfef36000 if DEBUG_HIGHBANK_UART
> - default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> - default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> - default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
> + default 0xff000000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> + default 0xff000800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> + default 0xff009800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
> default 0xffd01000 if DEBUG_HIP01_UART
> default DEBUG_UART_PHYS if !MMU
> depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
> index 05c5cd3e95f4..e3522e601ccd 100644
> --- a/arch/arm/mach-omap1/include/mach/hardware.h
> +++ b/arch/arm/mach-omap1/include/mach/hardware.h
> @@ -63,7 +63,7 @@ static inline u32 omap_cs3_phys(void)
>
> #endif /* ifndef __ASSEMBLER__ */
>
> -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
> +#define OMAP1_IO_OFFSET 0x00fb0000 /* Virtual IO = 0xff000000 */
> #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
>
> #include <mach/serial.h>
> --
> 2.29.2
>

\
 
 \ /
  Last update: 2022-04-20 15:46    [W:0.220 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site