lkml.org 
[lkml]   [2022]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [next] arm: boot failed - PC is at cpu_ca15_set_pte_ext
On Wed, 20 Apr 2022 at 13:01, Ard Biesheuvel <ardb@kernel.org> wrote:
>
> On Tue, 19 Apr 2022 at 12:59, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> > Linux next 20220419 boot failed on arm architecture qemu_arm and BeagleBoard
> > x15 device.
> >
> > kernel crash log from x15:
> > -----------------
> > [ 6.866516] 8<--- cut here ---
> > [ 6.869598] Unable to handle kernel paging request at virtual
> > address f000e62c
> > [ 6.876861] [f000e62c] *pgd=82935811, *pte=00000000, *ppte=00000000
> > [ 6.883209] Internal error: Oops: 807 [#3] SMP ARM
> > [ 6.888000] Modules linked in:
> > [ 6.891082] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G D W
> > 5.18.0-rc3-next-20220419 #1
> > [ 6.899993] Hardware name: Generic DRA74X (Flattened Device Tree)
> > [ 6.906127] PC is at cpu_ca15_set_pte_ext+0x4c/0x58
> > [ 6.911041] LR is at handle_mm_fault+0x60c/0xed0
> > [ 6.915679] pc : [<c031f26c>] lr : [<c04cfeb8>] psr: 40000013
> > [ 6.921966] sp : f000dde8 ip : f000de44 fp : a0000013
> > [ 6.927215] r10: 00000000 r9 : 00000000 r8 : c1e95194
> > [ 6.932464] r7 : c3c95000 r6 : befffff1 r5 : 00000081 r4 : c29d8000
> > [ 6.939025] r3 : 00000000 r2 : 00000000 r1 : 00000040 r0 : f000de2c
> > [ 6.945587] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> > [ 6.952758] Control: 10c5387d Table: 8020406a DAC: 00000051
> > [ 6.958526] Register r0 information: 2-page vmalloc region starting
> > at 0xf000c000 allocated at kernel_clone+0x94/0x3b0
> > [ 6.969299] Register r1 information: non-paged memory
> > [ 6.974365] Register r2 information: NULL pointer
> > [ 6.979095] Register r3 information: NULL pointer
> > [ 6.983825] Register r4 information: slab task_struct start
> > c29d8000 pointer offset 0
> > [ 6.991729] Register r5 information: non-paged memory
> > [ 6.996795] Register r6 information: non-paged memory
> > [ 7.001861] Register r7 information: slab vm_area_struct start
> > c3c95000 pointer offset 0
> > [ 7.010009] Register r8 information: non-slab/vmalloc memory
> > [ 7.015716] Register r9 information: NULL pointer
> > [ 7.020446] Register r10 information: NULL pointer
> > [ 7.025238] Register r11 information: non-paged memory
> > [ 7.030426] Register r12 information: 2-page vmalloc region
> > starting at 0xf000c000 allocated at kernel_clone+0x94/0x3b0
> > [ 7.041259] Process swapper/0 (pid: 1, stack limit = 0xfaff0077)
> > [ 7.047302] Stack: (0xf000dde8 to 0xf000e000)
> > [ 7.051696] dde0: c29d8000 00000cc0 c20a1108
> > c2065fa0 c1e09f50 b6db6db7
> > [ 7.059906] de00: c195bf0c 17c0f572 c29d8000 c3c95000 00000cc0
> > 000befff befff000 befffff1
> > [ 7.068115] de20: 00000081 c3c3afb8 c3c3afb8 00000000 00000000
> > 00000000 00000000 00000000
> > [ 7.076324] de40: 00000000 17c0f572 befff000 c3c95000 00002017
> > befffff1 00002017 00002fb8
> > [ 7.084564] de60: c2d04000 00000081 c29d8000 c04c6790 c20d01d4
> > 00000000 00000001 c20ce440
> > [ 7.092773] de80: c1e10bcc fffff000 00000000 c2a45680 eeb33cc0
> > c29d8000 00000000 c2d04000
> > [ 7.100982] dea0: befffff1 f000df18 00000000 00002017 c20661a0
> > c04c77e8 f000df18 00000000
> > [ 7.109222] dec0: 00000000 c1d95c40 00000002 c20661e0 00000000
> > 00000001 00000000 c04c7ad0
> > [ 7.117431] dee0: 00000011 c2d02a00 00000001 befffff1 c29d8000
> > 00000000 00000011 c2a30010
> > [ 7.125640] df00: c29d8000 c0524c24 f000df18 00000000 00000000
> > 2cd9e000 c1d95c40 17c0f572
> > [ 7.133850] df20: 00000000 c2d02a00 0000000b 00000ffc 00000000
> > befffff1 00000000 c0524f74
> > [ 7.142089] df40: c1e0e394 c2d02a00 c209a71c 38e38e39 c29d8000
> > bee00008 c2d02a00 c2a30000
> > [ 7.150299] df60: c1e0e394 c1e0e420 00000000 00000000 00000000
> > c05266bc c209a000 c1944c60
> > [ 7.158508] df80: 00000000 00000000 00000000 c129d2b4 c209a000
> > c1e0e394 00000000 c12b5600
> > [ 7.166748] dfa0: 00000000 c12b5518 00000000 c0300168 00000000
> > 00000000 00000000 00000000
> > [ 7.174957] dfc0: 00000000 00000000 00000000 00000000 00000000
> > 00000000 00000000 00000000
> > [ 7.183166] dfe0: 00000000 00000000 00000000 00000000 00000013
> > 00000000 00000000 00000000
> > [ 7.191406] Code: 13110001 12211b02 13110b02 03a03000 (e5a03800)
>
> This decodes to
>
> 0: 13110001 tstne r1, #1
> 4: 12211b02 eorne r1, r1, #2048 ; 0x800
> 8: 13110b02 tstne r1, #2048 ; 0x800
> c: 03a03000 moveq r3, #0
> 10:* e5a03800 str r3, [r0, #2048]! ; 0x800 <-- trapping instruction
>
> and R0 points into the stack. So we are updating a PTE that is located
> on the stack rather than in a page table somewhere, which seems very
> odd. However, this could be a latent bug that got uncovered by the
> VMAP stacks changes.
>
> Unfortunately, the vmlinux.xz file I downloaded from the link below
> seems to be different from the one that produced the crash, given that
> the LR address of c04cfeb8 does not seem to correspond with
> handle_mm_fault+0x60c/0xed0.
> Can you please double check the artifacts?

You can find the vmlinux.xz for the trace log I have pasted.

vmlinux.xz : https://builds.tuxbuild.com/280TS8MuM6sYWk5aUtrvWIw0RQ7/vmlinux.xz
artifact-location: https://builds.tuxbuild.com/280TS8MuM6sYWk5aUtrvWIw0RQ7

- Naresh

\
 
 \ /
  Last update: 2022-04-20 10:57    [W:0.100 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site