lkml.org 
[lkml]   [2022]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/1] arm64: dts: qcom: sm8350-sagami: usb qmp phy node - add 'vdda-pll-supply' & 'vdda-phy-supply'
Hi Bjorn,

On Wed, 20 Apr 2022 at 08:11, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Tue 19 Apr 15:58 CDT 2022, Bhupesh Sharma wrote:
>
> How about making the subject:
>
> "arm64: dts: qcom: sm8350-sagami: add supplies to USB phy node"
>
> It still says the same thing, but in much less characters.

Sure, this wording seems better to me. Will fix this in v3.

> > As suggested by Bjorn during review of [1], the 'vdda-pll-supply' &
> > 'vdda-phy-supply' supplies denote the power for the bus and the
> > clock of the usb qmp phy and are used by the qcom qmp phy driver.
> >
> > So, its safe to assume that the two regulators are the same as on
> > the MTP. So let's wire them up in the same way as the MTP.
> >
>
> I'm not sure it's "safe to assume", so I would like to get Konrad's
> input before merging this.

Right. @Konrad Dybcio , @Marijn Suijten - Any comments on this fix?
Please share your thoughts.

Thanks,
Bhupesh

> > In absence of the same 'make dtbs_check' leads to following warnings:
> >
> > arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml:
> > phy-wrapper@88e9000: 'vdda-phy-supply' is a required property
> >
> > arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml:
> > phy-wrapper@88e9000: 'vdda-pll-supply' is a required property
> >
>
> This is good!
>
> Thanks for the patch Bhupesh,
> Bjorn
>
> > [1]. https://lore.kernel.org/lkml/20220228123019.382037-9-bhupesh.sharma@linaro.org/
> >
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: konrad.dybcio@somainline.org
> > Cc: Vinod Koul <vkoul@kernel.org>
> > Cc: Marijn Suijten <marijn.suijten@somainline.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> > Changes since v1:
> > -----------------
> > - v1 can be found here: https://www.spinics.net/lists/linux-arm-msm/msg108467.html
> > - Fixed the commit message to read usb qmp phy instead of ufs phy (which
> > was introduced erroraneously in the commit log).
> >
> > .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 25 +++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> > index 90b13cbe2fa6..238ac9380ca2 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
> > */
> >
> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> > #include "sm8350.dtsi"
> > #include "pm8350.dtsi"
> > #include "pm8350b.dtsi"
> > @@ -75,6 +76,27 @@ ramoops@ffc00000 {
> > };
> > };
> >
> > +&apps_rsc {
> > + pm8350-rpmh-regulators {
> > + compatible = "qcom,pm8350-rpmh-regulators";
> > + qcom,pmic-id = "b";
> > +
> > + vreg_l1b_0p88: ldo1 {
> > + regulator-name = "vreg_l1b_0p88";
> > + regulator-min-microvolt = <912000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l6b_1p2: ldo6 {
> > + regulator-name = "vreg_l6b_1p2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1208000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +};
> > +
> > &adsp {
> > status = "okay";
> > firmware-name = "qcom/adsp.mbn";
> > @@ -256,4 +278,7 @@ &usb_1_hsphy {
> >
> > &usb_1_qmpphy {
> > status = "okay";
> > +
> > + vdda-phy-supply = <&vreg_l6b_1p2>;
> > + vdda-pll-supply = <&vreg_l1b_0p88>;
> > };
> > --
> > 2.35.1
> >

\
 
 \ /
  Last update: 2022-04-20 08:59    [W:0.057 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site