lkml.org 
[lkml]   [2022]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema
Date
Convert the Qualcomm MSM Serial UARTDM bindings to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/serial/qcom,msm-uartdm.txt | 81 -------------
.../bindings/serial/qcom,msm-uartdm.yaml | 112 ++++++++++++++++++
2 files changed, 112 insertions(+), 81 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
create mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml

diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
deleted file mode 100644
index 9d098cf73b53..000000000000
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MSM Serial UARTDM
-
-The MSM serial UARTDM hardware is designed for high-speed use cases where the
-transmit and/or receive channels can be offloaded to a dma-engine. From a
-software perspective it's mostly compatible with the MSM serial UART except
-that it supports reading and writing multiple characters at a time.
-
-Required properties:
-- compatible: Should contain at least "qcom,msm-uartdm".
- A more specific property should be specified as follows depending
- on the version:
- "qcom,msm-uartdm-v1.1"
- "qcom,msm-uartdm-v1.2"
- "qcom,msm-uartdm-v1.3"
- "qcom,msm-uartdm-v1.4"
-- reg: Should contain UART register locations and lengths. The first
- register shall specify the main control registers. An optional second
- register location shall specify the GSBI control region.
- "qcom,msm-uartdm-v1.3" is the only compatible value that might
- need the GSBI control region.
-- interrupts: Should contain UART interrupt.
-- clocks: Should contain the core clock and the AHB clock.
-- clock-names: Should be "core" for the core clock and "iface" for the
- AHB clock.
-
-Optional properties:
-- dmas: Should contain dma specifiers for transmit and receive channels
-- dma-names: Should contain "tx" for transmit and "rx" for receive channels
-- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
- used with TX DMA channel. Required when using DMA for transmission
- with UARTDM v1.3 and below.
-- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
- used with RX DMA channel. Required when using DMA for reception
- with UARTDM v1.3 and below.
-
-Note: Aliases may be defined to ensure the correct ordering of the UARTs.
-The alias serialN will result in the UART being assigned port N. If any
-serialN alias exists, then an alias must exist for each enabled UART. The
-serialN aliases should be in a .dts file instead of in a .dtsi file.
-
-Examples:
-
-- A uartdm v1.4 device with dma capabilities.
-
- serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
- clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
- clock-names = "core", "iface";
- dmas = <&dma0 0>, <&dma0 1>;
- dma-names = "tx", "rx";
- };
-
-- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
- clock-names = "core", "iface";
- };
-
-- serialN alias.
-
- aliases {
- serial0 = &uarta;
- serial1 = &uartc;
- serial2 = &uartb;
- };
-
- uarta: serial@12490000 {
- };
-
- uartb: serial@16340000 {
- };
-
- uartc: serial@1a240000 {
- };
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 000000000000..e73366fe7f7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ The MSM serial UARTDM hardware is designed for high-speed use cases where the
+ transmit and/or receive channels can be offloaded to a dma-engine. From a
+ software perspective it's mostly compatible with the MSM serial UART except
+ that it supports reading and writing multiple characters at a time.
+
+ Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+ The alias serialN will result in the UART being assigned port N. If any
+ serialN alias exists, then an alias must exist for each enabled UART. The
+ serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,msm-uartdm-v1.1
+ - qcom,msm-uartdm-v1.2
+ - qcom,msm-uartdm-v1.3
+ - qcom,msm-uartdm-v1.4
+ - const: qcom,msm-uartdm
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ qcom,rx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with RX DMA
+ channel. Required when using DMA for reception with UARTDM v1.3 and
+ below.
+
+ qcom,tx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with TX DMA
+ channel. Required when using DMA for transmission with UARTDM v1.3 and
+ below.
+
+ reg:
+ minItems: 1
+ items:
+ - description: Main control registers
+ - description: An optional second register location shall specify the GSBI control region.
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,msm-uartdm-v1.3
+ then:
+ properties:
+ reg:
+ minItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 1>, <&dma0 0>;
+ dma-names = "rx", "tx";
+ };
--
2.32.0
\
 
 \ /
  Last update: 2022-04-02 20:42    [W:0.136 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site