lkml.org 
[lkml]   [2022]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [V4 1/2] arch: arm64: dts: qcom: sc7280-idp: Configure cts pinctrl to bias-bus-hold
Hi,

On Mon, Apr 18, 2022 at 11:28 PM Vijaya Krishna Nivarthi
<quic_vnivarth@quicinc.com> wrote:
>
> WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> Change sleep pinctrl configuration to handle same.
>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
> v4: modify subject of patch to indicate file it is applying to
> v3: apply same change to active state and other sc7280*.dts* as well
> v2: used bias-bus-hold as per review comments
> v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)

You should have carried my tag forward. In any case:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

\
 
 \ /
  Last update: 2022-04-19 16:29    [W:0.055 / U:1.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site