lkml.org 
[lkml]   [2022]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] drm/vc4: Fix pm_runtime_get_sync() usage
Date
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.

Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
---
change in v2:
- switch to pm_runtime_resume_and_get() to fix refcount leak.
---
drivers/gpu/drm/vc4/vc4_dsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 752f921735c6..9d7ffaf6bc70 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -846,8 +846,8 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
unsigned long phy_clock;
int ret;

- ret = pm_runtime_get_sync(dev);
- if (ret) {
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0) {
DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->variant->port);
return;
}
--
2.17.1
\
 
 \ /
  Last update: 2022-04-20 02:51    [W:0.097 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site