lkml.org 
[lkml]   [2022]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board
On Tue, Mar 29, 2022 at 1:13 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 29/03/2022 11:44, Dongjin Kim wrote:
> > This patch is to add a device tree for new board Hardkernel ODROID-M1
> > based on Rockchip RK3568, includes basic peripherals -
> > uart/eMMC/uSD/i2c and on-board ethernet.
>
> I think the email got corrupted (incorrect To addresses).
>
> >
> > Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> > ---
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../boot/dts/rockchip/rk3568-odroid-m1.dts | 406 ++++++++++++++++++
> > 2 files changed, 407 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 4ae9f35434b8..81d160221227 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -61,3 +61,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
> > new file mode 100644
> > index 000000000000..d1a5d43127e9
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
> > @@ -0,0 +1,406 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2022 Hardkernel Co., Ltd.
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/leds/common.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include "rk3568.dtsi"
> > +
> > +/ {
> > + model = "Hardkernel ODROID-M1";
> > + compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
> > + i2c0 = &i2c3;
> > + i2c3 = &i2c0;
> > + mmc0 = &sdhci;
> > + mmc1 = &sdmmc0;
> > + serial0 = &uart1;
> > + serial1 = &uart0;
> > + };
> > +
> > + chosen: chosen {
>
> No need for label.
>
> > + stdout-path = "serial2:1500000n8";
> > + };
> > +
> > + dc_12v: dc-12v {
>
> Generic node name, so "regulator" or "regulator-0"

Unfortunately, this advice breaks the regulator-fixed driver, which it
seems cannot cope with a bunch of nodes all named "regulator".
Setting the regulators as regulator-0 -1 -2 leads to fun issues where
the regulator numbering in the kernel doesn't match the node numbers.
It also makes it more fun when additional regulators need to be added
and everything gets shuffled around.

If naming these uniquely to avoid confusion and collisions is such an
issue, why is it not caught by make W=1 dtbs_check?

>
> > + compatible = "regulator-fixed";
> > + regulator-name = "dc_12v";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <12000000>;
> > + regulator-max-microvolt = <12000000>;
> > + };
> > +
> > + leds: leds {
>
> Label seems unused.
>
> > + compatible = "gpio-leds";
> > +
> > + led_power: led-0 {
> > + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
> > + function = LED_FUNCTION_POWER;
> > + color = <LED_COLOR_ID_RED>;
> > + linux,default-trigger = "default-on";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&led_power_en>;
> > + };
> > + led_work: led-1 {
> > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> > + function = LED_FUNCTION_HEARTBEAT;
> > + color = <LED_COLOR_ID_BLUE>;
> > + linux,default-trigger = "heartbeat";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&led_work_en>;
> > + };
> > + };
> > +
> > + vcc3v3_sys: vcc3v3-sys {
>
> Generic node name.
>
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc3v3_sys";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + vin-supply = <&dc_12v>;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu1 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu2 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu3 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&gmac0 {
> > + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> > + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
> > + assigned-clock-rates = <0>, <125000000>;
> > + clock_in_out = "output";
> > + phy-handle = <&rgmii_phy0>;
> > + phy-mode = "rgmii";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&gmac0_miim
> > + &gmac0_tx_bus2
> > + &gmac0_rx_bus2
> > + &gmac0_rgmii_clk
> > + &gmac0_rgmii_bus>;
> > + status = "okay";
> > +
> > + tx_delay = <0x4f>;
> > + rx_delay = <0x2d>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + vdd_cpu: regulator@1c {
> > + compatible = "tcs,z`";
> > + reg = <0x1c>;
> > + fcs,suspend-voltage-selector = <1>;
>
> Mixed up indentation.
>
> > + regulator-name = "vdd_cpu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1150000>;
> > + regulator-ramp-delay = <2300>;
> > + vin-supply = <&vcc3v3_sys>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + rk809: pmic@20 {
> > + compatible = "rockchip,rk809";
> > + reg = <0x20>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> > + #clock-cells = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pmic_int>;
> > + rockchip,system-power-controller;
> > + vcc1-supply = <&vcc3v3_sys>;
> > + vcc2-supply = <&vcc3v3_sys>;
> > + vcc3-supply = <&vcc3v3_sys>;
> > + vcc4-supply = <&vcc3v3_sys>;
> > + vcc5-supply = <&vcc3v3_sys>;
> > + vcc6-supply = <&vcc3v3_sys>;
> > + vcc7-supply = <&vcc3v3_sys>;
> > + vcc8-supply = <&vcc3v3_sys>;
> > + vcc9-supply = <&vcc3v3_sys>;
> > + wakeup-source;
> > +
> > + regulators {
> > + vdd_logic: DCDC_REG1 {
>
> No underscores in node names, unless anything requires it.
>
> > + regulator-name = "vdd_logic";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-init-microvolt = <900000>;
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_gpu: DCDC_REG2 {
> > + regulator-name = "vdd_gpu";
> > + regulator-init-microvolt = <900000>;
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_ddr: DCDC_REG3 {
> > + regulator-name = "vcc_ddr";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-initial-mode = <0x2>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + };
> > + };
> > +
> > + vdd_npu: DCDC_REG4 {
> > + regulator-name = "vdd_npu";
> > + regulator-init-microvolt = <900000>;
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_1v8: DCDC_REG5 {
> > + regulator-name = "vcc_1v8";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda0v9_image: LDO_REG1 {
> > + regulator-name = "vdda0v9_image";
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <900000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda_0v9: LDO_REG2 {
> > + regulator-name = "vdda_0v9";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <900000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda0v9_pmu: LDO_REG3 {
> > + regulator-name = "vdda0v9_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <900000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <900000>;
> > + };
> > + };
> > +
> > + vccio_acodec: LDO_REG4 {
> > + regulator-name = "vccio_acodec";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vccio_sd: LDO_REG5 {
> > + regulator-name = "vccio_sd";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc3v3_pmu: LDO_REG6 {
> > + regulator-name = "vcc3v3_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <3300000>;
> > + };
> > + };
> > +
> > + vcca_1v8: LDO_REG7 {
> > + regulator-name = "vcca_1v8";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca1v8_pmu: LDO_REG8 {
> > + regulator-name = "vcca1v8_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <1800000>;
> > + };
> > + };
> > +
> > + vcca1v8_image: LDO_REG9 {
> > + regulator-name = "vcca1v8_image";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_3v3: SWITCH_REG1 {
> > + regulator-name = "vcc_3v3";
> > + regulator-always-on;
> > + regulator-boot-on;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc3v3_sd: SWITCH_REG2 {
> > + regulator-name = "vcc3v3_sd";
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
> > +&mdio0 {
> > + rgmii_phy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0x0>;
> > + reset-assert-us = <20000>;
> > + reset-deassert-us = <100000>;
> > + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > +
> > +&pinctrl {
> > + leds {
> > + led_power_en: led_power_en {
>
> No underscores in node names. Do bindings require specific naming? I
> would expect "-grp" or "-pins" suffixes, if possible.
>
> > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + led_work_en: led_work_en {
> > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + pmic {
> > + pmic_int: pmic_int {
> > + rockchip,pins =
> > + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +};
> > +
> > +&pmu_io_domains {
> > + pmuio1-supply = <&vcc3v3_pmu>;
> > + pmuio2-supply = <&vcc3v3_pmu>;
> > + vccio1-supply = <&vccio_acodec>;
> > + vccio2-supply = <&vcc_1v8>;
> > + vccio3-supply = <&vccio_sd>;
> > + vccio4-supply = <&vcc_1v8>;
> > + vccio5-supply = <&vcc_3v3>;
> > + vccio6-supply = <&vcc_3v3>;
> > + vccio7-supply = <&vcc_3v3>;
> > + status = "okay";
> > +};
> > +
> > +&saradc {
> > + vref-supply = <&vcca_1v8>;
> > + status = "okay";
> > +};
> > +
> > +&sdhci {
> > + bus-width = <8>;
> > + max-frequency = <200000000>;
> > + non-removable;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
> > + status = "okay";
> > +};
> > +
> > +&sdmmc0 {
> > + bus-width = <4>;
> > + cap-sd-highspeed;
> > + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> > + disable-wp;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> > + sd-uhs-sdr104;
> > + vmmc-supply = <&vcc3v3_sd>;
> > + vqmmc-supply = <&vccio_sd>;
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + status = "okay";
> > +};
>
>
> Best regards,
> Krzysztof
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

\
 
 \ /
  Last update: 2022-04-16 14:09    [W:0.085 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site