lkml.org 
[lkml]   [2022]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/8] selftests: firmware: Add firmware upload selftests
Date
Add selftests to verify the firmware upload mechanism. These test
include simple firmware uploads as well as upload cancellation and
error injection. The test creates three firmware devices and verifies
that they all work correctly and independently.

Signed-off-by: Russ Weight <russell.h.weight@intel.com>
---
v2:
- No changes from v1
---
tools/testing/selftests/firmware/Makefile | 2 +-
tools/testing/selftests/firmware/config | 1 +
tools/testing/selftests/firmware/fw_lib.sh | 7 +
.../selftests/firmware/fw_run_tests.sh | 4 +
tools/testing/selftests/firmware/fw_upload.sh | 214 ++++++++++++++++++
5 files changed, 227 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/firmware/fw_upload.sh

diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile
index 40211cd8f0e6..7992969deaa2 100644
--- a/tools/testing/selftests/firmware/Makefile
+++ b/tools/testing/selftests/firmware/Makefile
@@ -4,7 +4,7 @@ CFLAGS = -Wall \
-O2

TEST_PROGS := fw_run_tests.sh
-TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_lib.sh
+TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_upload.sh fw_lib.sh
TEST_GEN_FILES := fw_namespace

include ../lib.mk
diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
index bf634dda0720..6e402519b117 100644
--- a/tools/testing/selftests/firmware/config
+++ b/tools/testing/selftests/firmware/config
@@ -3,3 +3,4 @@ CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_FW_UPLOAD=y
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index 5b8c0fedee76..fe8d34dbe7ca 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -63,6 +63,7 @@ check_setup()
HAS_FW_LOADER_USER_HELPER="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)"
HAS_FW_LOADER_USER_HELPER_FALLBACK="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)"
HAS_FW_LOADER_COMPRESS="$(kconfig_has CONFIG_FW_LOADER_COMPRESS=y)"
+ HAS_FW_UPLOAD="$(kconfig_has CONFIG_FW_UPLOAD=y)"
PROC_FW_IGNORE_SYSFS_FALLBACK="0"
PROC_FW_FORCE_SYSFS_FALLBACK="0"

@@ -113,6 +114,12 @@ verify_reqs()
exit 0
fi
fi
+ if [ "$TEST_REQS_FW_UPLOAD" = "yes" ]; then
+ if [ ! "$HAS_FW_UPLOAD" = "yes" ]; then
+ echo "firmware upload disabled so ignoring test"
+ exit 0
+ fi
+ fi
}

setup_tmp_file()
diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh
index 777377078d5e..f6d95a2d5124 100755
--- a/tools/testing/selftests/firmware/fw_run_tests.sh
+++ b/tools/testing/selftests/firmware/fw_run_tests.sh
@@ -22,6 +22,10 @@ run_tests()
proc_set_force_sysfs_fallback $1
proc_set_ignore_sysfs_fallback $2
$TEST_DIR/fw_fallback.sh
+
+ proc_set_force_sysfs_fallback $1
+ proc_set_ignore_sysfs_fallback $2
+ $TEST_DIR/fw_upload.sh
}

run_test_config_0001()
diff --git a/tools/testing/selftests/firmware/fw_upload.sh b/tools/testing/selftests/firmware/fw_upload.sh
new file mode 100755
index 000000000000..c7a6f06c9adb
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_upload.sh
@@ -0,0 +1,214 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates the user-initiated fw upload mechanism of the firmware
+# loader. It verifies that one or more firmware devices can be created
+# for a device driver. It also verifies the data transfer, the
+# cancellation support, and the error flows.
+set -e
+
+TEST_REQS_FW_UPLOAD="yes"
+TEST_DIR=$(dirname $0)
+
+progress_states="preparing transferring programming"
+errors="hw-error
+ timeout
+ device-busy
+ invalid-file-size
+ read-write-error
+ flash-wearout"
+error_abort="user-abort"
+fwname1=fw1
+fwname2=fw2
+fwname3=fw3
+
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+
+trap "upload_finish" EXIT
+
+upload_finish() {
+ local fwdevs="$fwname1 $fwname2 $fwname3"
+
+ for name in $fwdevs; do
+ if [ -e "$DIR/$name" ]; then
+ echo -n "$name" > "$DIR"/upload_unregister
+ fi
+ done
+}
+
+upload_fw() {
+ local name="$1"
+ local file="$2"
+
+ echo 1 > "$DIR"/"$name"/loading
+ cat "$file" > "$DIR"/"$name"/data
+ echo 0 > "$DIR"/"$name"/loading
+}
+
+verify_fw() {
+ local name="$1"
+ local file="$2"
+
+ echo -n "$name" > "$DIR"/config_upload_name
+ if ! cmp "$file" "$DIR"/upload_read > /dev/null 2>&1; then
+ echo "$0: firmware compare for $name did not match" >&2
+ exit 1
+ fi
+
+ echo "$0: firmware upload for $name works" >&2
+ return 0
+}
+
+inject_error() {
+ local name="$1"
+ local status="$2"
+ local error="$3"
+
+ echo 1 > "$DIR"/"$name"/loading
+ echo -n "inject":"$status":"$error" > "$DIR"/"$name"/data
+ echo 0 > "$DIR"/"$name"/loading
+}
+
+await_status() {
+ local name="$1"
+ local expected="$2"
+ local status
+ local i
+
+ let i=0
+ while [ $i -lt 50 ]; do
+ status=$(cat "$DIR"/"$name"/status)
+ if [ "$status" = "$expected" ]; then
+ return 0;
+ fi
+ sleep 1e-03
+ let i=$i+1
+ done
+
+ echo "$0: Invalid status: Expected $expected, Actual $status" >&2
+ return 1;
+}
+
+await_idle() {
+ local name="$1"
+
+ await_status "$name" "idle"
+ return $?
+}
+
+expect_error() {
+ local name="$1"
+ local expected="$2"
+ local error=$(cat "$DIR"/"$name"/error)
+
+ if [ "$error" != "$expected" ]; then
+ echo "Invalid error: Expected $expected, Actual $error" >&2
+ return 1
+ fi
+
+ return 0
+}
+
+random_firmware() {
+ local bs="$1"
+ local count="$2"
+ local file=$(mktemp -p /tmp uploadfwXXX.bin)
+
+ dd if=/dev/urandom of="$file" bs="$bs" count="$count" > /dev/null 2>&1
+ echo "$file"
+}
+
+test_upload_cancel() {
+ local name="$1"
+ local status
+
+ for status in $progress_states; do
+ inject_error $name $status $error_abort
+ if ! await_status $name $status; then
+ exit 1
+ fi
+
+ echo 1 > "$DIR"/"$name"/cancel
+
+ if ! await_idle $name; then
+ exit 1
+ fi
+
+ if ! expect_error $name "$status":"$error_abort"; then
+ exit 1
+ fi
+ done
+
+ echo "$0: firmware upload cancellation works"
+ return 0
+}
+
+test_error_handling() {
+ local name=$1
+ local status
+ local error
+
+ for status in $progress_states; do
+ for error in $errors; do
+ inject_error $name $status $error
+
+ if ! await_idle $name; then
+ exit 1
+ fi
+
+ if ! expect_error $name "$status":"$error"; then
+ exit 1
+ fi
+
+ done
+ done
+ echo "$0: firmware upload error handling works"
+}
+
+test_fw_too_big() {
+ local name=$1
+ local fw_too_big=`random_firmware 512 5`
+ local expected="preparing:invalid-file-size"
+
+ upload_fw $name $fw_too_big
+ rm -f $fw_too_big
+
+ if ! await_idle $name; then
+ exit 1
+ fi
+
+ if ! expect_error $name $expected; then
+ exit 1
+ fi
+
+ echo "$0: oversized firmware error handling works"
+}
+
+echo -n "$fwname1" > "$DIR"/upload_register
+echo -n "$fwname2" > "$DIR"/upload_register
+echo -n "$fwname3" > "$DIR"/upload_register
+
+test_upload_cancel $fwname1
+test_error_handling $fwname1
+test_fw_too_big $fwname1
+
+fw_file1=`random_firmware 512 4`
+fw_file2=`random_firmware 512 3`
+fw_file3=`random_firmware 512 2`
+
+upload_fw $fwname1 $fw_file1
+upload_fw $fwname2 $fw_file2
+upload_fw $fwname3 $fw_file3
+
+verify_fw ${fwname1} ${fw_file1}
+verify_fw ${fwname2} ${fw_file2}
+verify_fw ${fwname3} ${fw_file3}
+
+echo -n "$fwname1" > "$DIR"/upload_unregister
+echo -n "$fwname2" > "$DIR"/upload_unregister
+echo -n "$fwname3" > "$DIR"/upload_unregister
+
+exit 0
--
2.25.1
\
 
 \ /
  Last update: 2022-04-15 22:09    [W:0.071 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site