lkml.org 
[lkml]   [2022]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/1] iio: imu: bmi160: Make use of device properties
On Thu, 14 Apr 2022 16:18:04 +0300
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:

> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> While at it, reuse temporary device pointer in the same function.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Gah. Can't argue with the patch as it's definitely an improvement, but
dev_name() was never the right thing to do if we couldn't get
the part name more directly. That field is supposed to be a chip
part number which dev_name is very unlikely to be!

Ah well - it's userspace ABI so not much we can do about it now...

Hence applied to the togreg branch of iio.git. Note I'll not
be pushing that out as non rebasing for a few days so time
for others to review if they wish.

Thanks,

Jonathan

> ---
> v2: fixed subject to use proper part number in it
> drivers/iio/imu/bmi160/bmi160_core.c | 27 ++++++---------------------
> drivers/iio/imu/bmi160/bmi160_i2c.c | 13 ++++++-------
> drivers/iio/imu/bmi160/bmi160_spi.c | 18 +++++++++++-------
> 3 files changed, 23 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
> index 01336105792e..e7aec56ea136 100644
> --- a/drivers/iio/imu/bmi160/bmi160_core.c
> +++ b/drivers/iio/imu/bmi160/bmi160_core.c
> @@ -11,10 +11,9 @@
> */
> #include <linux/module.h>
> #include <linux/regmap.h>
> -#include <linux/acpi.h>
> #include <linux/delay.h>
> #include <linux/irq.h>
> -#include <linux/of_irq.h>
> +#include <linux/property.h>
> #include <linux/regulator/consumer.h>
>
> #include <linux/iio/iio.h>
> @@ -525,17 +524,6 @@ static const struct iio_info bmi160_info = {
> .attrs = &bmi160_attrs_group,
> };
>
> -static const char *bmi160_match_acpi_device(struct device *dev)
> -{
> - const struct acpi_device_id *id;
> -
> - id = acpi_match_device(dev->driver->acpi_match_table, dev);
> - if (!id)
> - return NULL;
> -
> - return dev_name(dev);
> -}
> -
> static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg,
> unsigned int mask, unsigned int bits,
> unsigned int write_usleep)
> @@ -647,18 +635,18 @@ int bmi160_enable_irq(struct regmap *regmap, bool enable)
> }
> EXPORT_SYMBOL(bmi160_enable_irq);
>
> -static int bmi160_get_irq(struct device_node *of_node, enum bmi160_int_pin *pin)
> +static int bmi160_get_irq(struct fwnode_handle *fwnode, enum bmi160_int_pin *pin)
> {
> int irq;
>
> /* Use INT1 if possible, otherwise fall back to INT2. */
> - irq = of_irq_get_byname(of_node, "INT1");
> + irq = fwnode_irq_get_byname(fwnode, "INT1");
> if (irq > 0) {
> *pin = BMI160_PIN_INT1;
> return irq;
> }
>
> - irq = of_irq_get_byname(of_node, "INT2");
> + irq = fwnode_irq_get_byname(fwnode, "INT2");
> if (irq > 0)
> *pin = BMI160_PIN_INT2;
>
> @@ -688,7 +676,7 @@ static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type,
> return -EINVAL;
> }
>
> - open_drain = of_property_read_bool(dev->of_node, "drive-open-drain");
> + open_drain = device_property_read_bool(dev, "drive-open-drain");
>
> return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask,
> BMI160_NORMAL_WRITE_USLEEP);
> @@ -872,9 +860,6 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
> if (ret)
> return ret;
>
> - if (!name && ACPI_HANDLE(dev))
> - name = bmi160_match_acpi_device(dev);
> -
> indio_dev->channels = bmi160_channels;
> indio_dev->num_channels = ARRAY_SIZE(bmi160_channels);
> indio_dev->name = name;
> @@ -887,7 +872,7 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
> if (ret)
> return ret;
>
> - irq = bmi160_get_irq(dev->of_node, &int_pin);
> + irq = bmi160_get_irq(dev_fwnode(dev), &int_pin);
> if (irq > 0) {
> ret = bmi160_setup_irq(indio_dev, irq, int_pin);
> if (ret)
> diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
> index 26398614eddf..02f149d37b17 100644
> --- a/drivers/iio/imu/bmi160/bmi160_i2c.c
> +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
> @@ -8,10 +8,9 @@
> * - 0x68 if SDO is pulled to GND
> * - 0x69 if SDO is pulled to VDDIO
> */
> -#include <linux/acpi.h>
> #include <linux/i2c.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/module.h>
> -#include <linux/of.h>
> #include <linux/regmap.h>
>
> #include "bmi160.h"
> @@ -20,7 +19,7 @@ static int bmi160_i2c_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct regmap *regmap;
> - const char *name = NULL;
> + const char *name;
>
> regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
> if (IS_ERR(regmap)) {
> @@ -31,6 +30,8 @@ static int bmi160_i2c_probe(struct i2c_client *client,
>
> if (id)
> name = id->name;
> + else
> + name = dev_name(&client->dev);
>
> return bmi160_core_probe(&client->dev, regmap, name, false);
> }
> @@ -47,19 +48,17 @@ static const struct acpi_device_id bmi160_acpi_match[] = {
> };
> MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
>
> -#ifdef CONFIG_OF
> static const struct of_device_id bmi160_of_match[] = {
> { .compatible = "bosch,bmi160" },
> { },
> };
> MODULE_DEVICE_TABLE(of, bmi160_of_match);
> -#endif
>
> static struct i2c_driver bmi160_i2c_driver = {
> .driver = {
> .name = "bmi160_i2c",
> - .acpi_match_table = ACPI_PTR(bmi160_acpi_match),
> - .of_match_table = of_match_ptr(bmi160_of_match),
> + .acpi_match_table = bmi160_acpi_match,
> + .of_match_table = bmi160_of_match,
> },
> .probe = bmi160_i2c_probe,
> .id_table = bmi160_i2c_id,
> diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
> index 61389b41c6d9..24f7d75c7903 100644
> --- a/drivers/iio/imu/bmi160/bmi160_spi.c
> +++ b/drivers/iio/imu/bmi160/bmi160_spi.c
> @@ -5,9 +5,8 @@
> * Copyright (c) 2016, Intel Corporation.
> *
> */
> -#include <linux/acpi.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/module.h>
> -#include <linux/of.h>
> #include <linux/regmap.h>
> #include <linux/spi/spi.h>
>
> @@ -17,6 +16,7 @@ static int bmi160_spi_probe(struct spi_device *spi)
> {
> struct regmap *regmap;
> const struct spi_device_id *id = spi_get_device_id(spi);
> + const char *name;
>
> regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
> if (IS_ERR(regmap)) {
> @@ -24,7 +24,13 @@ static int bmi160_spi_probe(struct spi_device *spi)
> regmap);
> return PTR_ERR(regmap);
> }
> - return bmi160_core_probe(&spi->dev, regmap, id->name, true);
> +
> + if (id)
> + name = id->name;
> + else
> + name = dev_name(&spi->dev);
> +
> + return bmi160_core_probe(&spi->dev, regmap, name, true);
> }
>
> static const struct spi_device_id bmi160_spi_id[] = {
> @@ -39,20 +45,18 @@ static const struct acpi_device_id bmi160_acpi_match[] = {
> };
> MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
>
> -#ifdef CONFIG_OF
> static const struct of_device_id bmi160_of_match[] = {
> { .compatible = "bosch,bmi160" },
> { },
> };
> MODULE_DEVICE_TABLE(of, bmi160_of_match);
> -#endif
>
> static struct spi_driver bmi160_spi_driver = {
> .probe = bmi160_spi_probe,
> .id_table = bmi160_spi_id,
> .driver = {
> - .acpi_match_table = ACPI_PTR(bmi160_acpi_match),
> - .of_match_table = of_match_ptr(bmi160_of_match),
> + .acpi_match_table = bmi160_acpi_match,
> + .of_match_table = bmi160_of_match,
> .name = "bmi160_spi",
> },
> };

\
 
 \ /
  Last update: 2022-04-15 20:12    [W:0.231 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site