lkml.org 
[lkml]   [2022]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 0/6] virtio: Solution to restrict memory access under Xen using xen-virtio DMA ops layer
On Thu, Apr 14, 2022 at 10:19:27PM +0300, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>
> Hello all.
>
> The purpose of this RFC patch series is to add support for restricting memory access under Xen using specific
> grant table based DMA ops layer. Patch series is based on Juergen Gross’ initial work [1] which implies using
> grant references instead of raw guest physical addresses (GPA) for the virtio communications (some kind of
> the software IOMMU).
>
> The high level idea is to create new Xen’s grant table based DMA ops layer for the guest Linux whose main
> purpose is to provide a special 64-bit DMA address which is formed by using the grant reference (for a page
> to be shared with the backend) with offset and setting the highest address bit (this is for the backend to
> be able to distinguish grant ref based DMA address from normal GPA). For this to work we need the ability
> to allocate contiguous (consecutive) grant references for multi-page allocations. And the backend then needs
> to offer VIRTIO_F_ACCESS_PLATFORM and VIRTIO_F_VERSION_1 feature bits (it must support virtio-mmio modern
> transport for 64-bit addresses in the virtqueue).

I'm not enough of a xen expert to review this, and I didn't get
all patches, but I'm very happy to see that approach being
taken. VIRTIO_F_ACCESS_PLATFORM and VIRTIO_F_VERSION_1 are
exactly the way to declare not all of memory is accessible.
Thanks!

> Xen's grant mapping mechanism is the secure and safe solution to share pages between domains which proven
> to work and works for years (in the context of traditional Xen PV drivers for example). So far, the foreign
> mapping is used for the virtio backend to map and access guest memory. With the foreign mapping, the backend
> is able to map arbitrary pages from the guest memory (or even from Dom0 memory). And as the result, the malicious
> backend which runs in a non-trusted domain can take advantage of this. Instead, with the grant mapping
> the backend is only allowed to map pages which were explicitly granted by the guest before and nothing else.
> According to the discussions in various mainline threads this solution would likely be welcome because it
> perfectly fits in the security model Xen provides.
>
> What is more, the grant table based solution requires zero changes to the Xen hypervisor itself at least
> with virtio-mmio and DT (in comparison, for example, with "foreign mapping + virtio-iommu" solution which would
> require the whole new complex emulator in hypervisor in addition to new functionality/hypercall to pass IOVA
> from the virtio backend running elsewhere to the hypervisor and translate it to the GPA before mapping into
> P2M or denying the foreign mapping request if no corresponding IOVA-GPA mapping present in the IOMMU page table
> for that particular device). We only need to update toolstack to insert a new "xen,dev-domid" property to
> the virtio-mmio device node when creating a guest device-tree (this is an indicator for the guest to use grants
> and the ID of Xen domain where the corresponding backend resides, it is used as an argument to the grant mapping
> APIs). It worth mentioning that toolstack patch is based on non upstreamed yet “Virtio support for toolstack
> on Arm” series which is on review now [2].
>
> Please note the following:
> - Patch series only covers Arm and virtio-mmio (device-tree) for now. To enable the restricted memory access
> feature on Arm the following options should be set:
> CONFIG_XEN_VIRTIO = y
> CONFIG_XEN_HVM_VIRTIO_GRANT = y
> - Some callbacks in xen-virtio DMA ops layer (map_sg/unmap_sg, etc) are not implemented yet as they are not
> needed/used in the first prototype
>
> Patch series is rebased on Linux 5.18-rc2 tag and tested on Renesas Salvator-X board + H3 ES3.0 SoC (Arm64)
> with standalone userspace (non-Qemu) virtio-mmio based virtio-disk backend running in Driver domain and Linux
> guest running on existing virtio-blk driver (frontend). No issues were observed. Guest domain 'reboot/destroy'
> use-cases work properly. I have also tested other use-cases such as assigning several virtio block devices
> or a mix of virtio and Xen PV block devices to the guest.
>
> 1. Xen changes located at (last patch):
> https://github.com/otyshchenko1/xen/commits/libxl_virtio_next
> 2. Linux changes located at:
> https://github.com/otyshchenko1/linux/commits/virtio_grant5
> 3. virtio-disk changes located at:
> https://github.com/otyshchenko1/virtio-disk/commits/virtio_grant
>
> Any feedback/help would be highly appreciated.
>
> [1] https://www.youtube.com/watch?v=IrlEdaIUDPk
> [2] https://lore.kernel.org/xen-devel/1649442065-8332-1-git-send-email-olekstysh@gmail.com/
>
> Juergen Gross (2):
> xen/grants: support allocating consecutive grants
> virtio: add option to restrict memory access under Xen
>
> Oleksandr Tyshchenko (4):
> dt-bindings: xen: Add xen,dev-domid property description for
> xen-virtio layer
> virtio: Various updates to xen-virtio DMA ops layer
> arm/xen: Introduce xen_setup_dma_ops()
> arm/xen: Assign xen-virtio DMA ops for virtio devices in Xen guests
>
> .../devicetree/bindings/virtio/xen,dev-domid.yaml | 39 +++
> arch/arm/include/asm/xen/xen-ops.h | 1 +
> arch/arm/mm/dma-mapping.c | 5 +-
> arch/arm/xen/enlighten.c | 11 +
> arch/arm64/include/asm/xen/xen-ops.h | 1 +
> arch/arm64/mm/dma-mapping.c | 5 +-
> arch/x86/mm/init.c | 15 +
> arch/x86/mm/mem_encrypt.c | 5 -
> arch/x86/xen/Kconfig | 9 +
> drivers/xen/Kconfig | 20 ++
> drivers/xen/Makefile | 1 +
> drivers/xen/grant-table.c | 238 +++++++++++++--
> drivers/xen/xen-virtio.c | 335 +++++++++++++++++++++
> include/xen/arm/xen-ops.h | 20 ++
> include/xen/grant_table.h | 4 +
> include/xen/xen-ops.h | 13 +
> 16 files changed, 679 insertions(+), 43 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/virtio/xen,dev-domid.yaml
> create mode 100644 arch/arm/include/asm/xen/xen-ops.h
> create mode 100644 arch/arm64/include/asm/xen/xen-ops.h
> create mode 100644 drivers/xen/xen-virtio.c
> create mode 100644 include/xen/arm/xen-ops.h
>
> --
> 2.7.4

\
 
 \ /
  Last update: 2022-04-15 10:46    [W:1.060 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site