lkml.org 
[lkml]   [2022]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/5] mm: demotion: Set demotion list differently
From
Date
On Wed, 2022-04-13 at 14:52 +0530, Jagdish Gediya wrote:
> Sharing used_targets between multiple nodes in a single
> pass limits some of the opportunities for demotion target
> sharing.
>
> Don't share the used targets between multiple nodes in a
> single pass, instead accumulate all the used targets in
> source nodes shared by all pass, and reset 'used_targets'
> to source nodes while finding demotion targets for any new
> node.
>
> This results into some more opportunities to share demotion
> targets between multiple source nodes, e.g. with below NUMA
> topology, where node 0 & 1 are cpu + dram nodes, node 2 & 3
> are equally slower memory only nodes, and node 4 is slowest
> memory only node,
>
> available: 5 nodes (0-4)
> node 0 cpus: 0 1
> node 0 size: n MB
> node 0 free: n MB
> node 1 cpus: 2 3
> node 1 size: n MB
> node 1 free: n MB
> node 2 cpus:
> node 2 size: n MB
> node 2 free: n MB
> node 3 cpus:
> node 3 size: n MB
> node 3 free: n MB
> node 4 cpus:
> node 4 size: n MB
> node 4 free: n MB
> node distances:
> node 0 1 2 3 4
>   0: 10 20 40 40 80
>   1: 20 10 40 40 80
>   2: 40 40 10 40 80
>   3: 40 40 40 10 80
>   4: 80 80 80 80 10
>
> The existing implementation gives below demotion targets,
>
> node demotion_target
>  0 3, 2
>  1 4
>  2 X
>  3 X
>  4 X
>
> With this patch applied, below are the demotion targets,
>
> node demotion_target
>  0 3, 2
>  1 3, 2
>  2 4
>  3 4
>  4 X
>
> e.g. with below NUMA topology, where node 0, 1 & 2 are
> cpu + dram nodes and node 3 is slow memory node,
>
> available: 4 nodes (0-3)
> node 0 cpus: 0 1
> node 0 size: n MB
> node 0 free: n MB
> node 1 cpus: 2 3
> node 1 size: n MB
> node 1 free: n MB
> node 2 cpus: 4 5
> node 2 size: n MB
> node 2 free: n MB
> node 3 cpus:
> node 3 size: n MB
> node 3 free: n MB
> node distances:
> node 0 1 2 3
>   0: 10 20 20 40
>   1: 20 10 20 40
>   2: 20 20 10 40
>   3: 40 40 40 10
>
> The existing implementation gives below demotion targets,
>
> node demotion_target
>  0 3
>  1 X
>  2 X
>  3 X
>
> With this patch applied, below are the demotion targets,
>
> node demotion_target
>  0 3
>  1 3
>  2 3
>  3 X
>

With the [PATCH v1], you have describe the demotion order changes for
the following system, I guess there's no change with [PATCH v2]?

With below NUMA topology, where node 0 & 2 are cpu + dram
nodes and node 1 & 3 are slow memory nodes,

available: 4 nodes (0-3)
node 0 cpus: 0 1
node 0 size: n MB
node 0 free: n MB
node 1 cpus:
node 1 size: n MB
node 1 free: n MB
node 2 cpus: 2 3
node 2 size: n MB
node 2 free: n MB
node 3 cpus:
node 3 size: n MB
node 3 free: n MB
node distances:
node 0 1 2 3
0: 10 40 20 80
1: 40 10 80 80
2: 20 80 10 40
3: 80 80 40 10

And, what is the demotion order for the following system with [PATCH
v2]?

Node 0 & 2 are cpu + dram nodes and node 1 are slow
memory node near node 0,

available: 3 nodes (0-2)
node 0 cpus: 0 1
node 0 size: n MB
node 0 free: n MB
node 1 cpus:
node 1 size: n MB
node 1 free: n MB
node 2 cpus: 2 3
node 2 size: n MB
node 2 free: n MB
node distances:
node 0 1 2
0: 10 40 20
1: 40 10 80
2: 20 80 10

Best Regards,
Huang, Ying


[snip]


\
 
 \ /
  Last update: 2022-09-17 16:21    [W:0.239 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site