lkml.org 
[lkml]   [2022]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.4 357/475] dt-bindings: mtd: nand-controller: Fix the reg property description
    Date
    From: Miquel Raynal <miquel.raynal@bootlin.com>

    commit 93f2ec9e401276fb4ea9903194a5bfcf175f9a2c upstream.

    The reg property of a NAND device always references the chip-selects.
    The ready/busy lines are described in the nand-rb property. I believe
    this was a harmless copy/paste error during the conversion to yaml.

    Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options")
    Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
    Acked-by: Rob Herring <robh@kernel.org>
    Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-2-miquel.raynal@bootlin.com
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
    +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
    @@ -44,7 +44,7 @@ patternProperties:
    properties:
    reg:
    description:
    - Contains the native Ready/Busy IDs.
    + Contains the chip-select IDs.

    nand-ecc-mode:
    allOf:

    \
     
     \ /
      Last update: 2022-04-14 17:07    [W:2.449 / U:0.156 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site