lkml.org 
[lkml]   [2022]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 1/8] arm64: dts: ls1028a: Add PCIe EP nodes
Date


> -----Original Message-----
> From: Vladimir Oltean <olteanv@gmail.com>
> Sent: Wednesday, April 13, 2022 11:32 AM
> To: Leo Li <leoyang.li@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Xiaowei Bao
> <xiaowei.bao@nxp.com>
> Subject: Re: [PATCH v3 1/8] arm64: dts: ls1028a: Add PCIe EP nodes
>
> On Tue, Dec 14, 2021 at 03:32:33AM -0600, Li Yang wrote:
> > From: Xiaowei Bao <xiaowei.bao@nxp.com>
> >
> > Add PCIe EP nodes for ls1028a to support EP mode.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Signed-off-by: Li Yang <leoyang.li@nxp.com>
> > ---
> > .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24
> > +++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index fd3f3e8bb6ce..9010c535252a 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -637,6 +637,18 @@ pcie1: pcie@3400000 {
> > status = "disabled";
> > };
> >
> > + pcie_ep1: pcie-ep@3400000 {
> > + compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
> > + reg = <0x00 0x03400000 0x0 0x00100000
> > + 0x80 0x00000000 0x8 0x00000000>;
> > + reg-names = "regs", "addr_space";
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> /* PME interrupt */
> > + interrupt-names = "pme";
> > + num-ib-windows = <6>;
> > + num-ob-windows = <8>;
> > + status = "disabled";
> > + };
> > +
> > pcie2: pcie@3500000 {
> > compatible = "fsl,ls1028a-pcie";
> > reg = <0x00 0x03500000 0x0 0x00100000>, /*
> controller registers */
> > @@ -664,6 +676,18 @@ pcie2: pcie@3500000 {
> > status = "disabled";
> > };
> >
> > + pcie_ep2: pcie-ep@3500000 {
> > + compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
> > + reg = <0x00 0x03500000 0x0 0x00100000
> > + 0x88 0x00000000 0x8 0x00000000>;
> > + reg-names = "regs", "addr_space";
> > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> /* PME interrupt */
> > + interrupt-names = "pme";
> > + num-ib-windows = <6>;
> > + num-ob-windows = <8>;
> > + status = "disabled";
> > + };
> > +
> > smmu: iommu@5000000 {
> > compatible = "arm,mmu-500";
> > reg = <0 0x5000000 0 0x800000>;
> > --
> > 2.25.1
> >
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:631.23-656.5: Warning
> (unique_unit_address): /soc/pcie@3400000: duplicate unit-address (also
> used in node /soc/pcie-ep@3400000)
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:670.23-695.5: Warning
> (unique_unit_address): /soc/pcie@3500000: duplicate unit-address (also
> used in node /soc/pcie-ep@3500000)

This would be a common problem for all the layerscape PCIe controller. The controller can either work in RC mode or EP mode. The current binding of the controller defined two compatibles, one for RC and one for EP. Therefore the SoC dtsi will have two nodes with the same unit address one for EP one for RC. Fixing this probably requires comprehensive updates to the binding which breaks backward compatibility.

Regards,
Leo

\
 
 \ /
  Last update: 2022-04-13 20:05    [W:0.101 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site