lkml.org 
[lkml]   [2022]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
Date
On Mon, 11 Apr 2022 14:53:45 +0200, Geert Uytterhoeven wrote:
> HyperFlash devices fail to probe:
>
> rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
>
> In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
> (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
> from half of the transfer size, cfr. the rpcif_bits_set() helper
> function. However, rpcif_reg_{read,write}() does not take the bus size
> into account, and does not double all Manual Mode Data Register access
> sizes when communicating with a HyperFlash or Octal-SPI Flash device.
>
> [...]

Applied, thanks!

[1/1] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
commit: 953d7e7cedb49fec97807166be6fa1ecec1cf0c4

Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

\
 
 \ /
  Last update: 2022-04-13 11:50    [W:0.033 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site