lkml.org 
[lkml]   [2022]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/4] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs
On Wed, Apr 13, 2022 at 08:51:14PM +0530, Srinivasa Rao Mandadapu wrote:
> SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
> external codecs using soundwire masters. Add these nodes for sc7280 based
> platforms audio use case.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 122 +++++++++++++++++++++++++++++++++++
> 1 file changed, 122 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 50fea0e..c0f127f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1980,6 +1980,128 @@
> #clock-cells = <1>;
> };
>
> + lpass_rx_macro: codec@3200000 {
> + compatible = "qcom,sc7280-lpass-rx-macro";
> + reg = <0 0x03200000 0 0x1000>;
> +
> + status = "disabled";

nit: this is easily missed here inmidst of the other stuff, best place
it at the end of the node as many other nodes do.

> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_rx_swr>;
> +
> + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
> + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
> + <&lpass_va_macro>;
> + clock-names = "mclk", "npl", "fsgen";
> +
> + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> + power-domain-names ="macro", "dcodec";

add space after '='.

> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> + };
> +
> + swr0: soundwire@3210000 {
> + compatible = "qcom,soundwire-v1.6.0";
> + reg = <0 0x03210000 0 0x2000>;
> +
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_rx_macro>;
> + clock-names = "iface";
> +
> + qcom,din-ports = <0>;
> + qcom,dout-ports = <5>;
> +
> + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
> + reset-names = "swr_audio_cgcr";

The resets aren't mentioned in the binding, should they be added?

> +
> + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
> + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
> +
> + #sound-dai-cells = <1>;
> + #address-cells = <2>;
> + #size-cells = <0>;

in difference to the other nodes the soundwire ones don't have
'status = "disabled"', should they be disabled by default?

> + };
> +
> + lpass_tx_macro: codec@3220000 {
> + compatible = "qcom,sc7280-lpass-tx-macro";
> + reg = <0 0x03220000 0 0x1000>;
> +
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_tx_swr>;
> +
> + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
> + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
> + <&lpass_va_macro>;
> + clock-names = "mclk", "npl", "fsgen";
> +
> + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> + power-domain-names ="macro", "dcodec";

add space after '='

> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> + };
> +
> + swr1: soundwire@3230000 {
> + compatible = "qcom,soundwire-v1.6.0";
> + reg = <0 0x03230000 0 0x2000>;
> +
> + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "swr_master_irq", "swr_wake_irq";

From the binding

- interrupt-names:
Usage: Optional
Value type: boolean
Value type: <stringlist>
Definition: should be "core" for core and "wakeup" for wake interrupt.

Does the binding need an update?

> + clocks = <&lpass_tx_macro>;
> + clock-names = "iface";
> +
> + qcom,din-ports = <3>;
> + qcom,dout-ports = <0>;
> +
> + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
> + reset-names = "swr_audio_cgcr";
> +
> + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
> + qcom,port-offset = <1>;
> +
> + #sound-dai-cells = <1>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + };
> +
> + lpass_va_macro: codec@3370000 {
> + compatible = "qcom,sc7280-lpass-va-macro";
> + reg = <0 0x03370000 0 0x1000>;
> +
> + status = "disabled";
> + pinctrl-0 = <&lpass_dmic01>;
> + pinctrl-names = "default";
> +
> + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
> + clock-names = "mclk";
> +
> + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
> + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> + power-domain-names ="macro", "dcodec";

add space after '='.

> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> + };
> +
> lpass_ag_noc: interconnect@3c40000 {
> reg = <0 0x03c40000 0 0xf080>;
> compatible = "qcom,sc7280-lpass-ag-noc";
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2022-04-13 20:54    [W:0.113 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site