lkml.org 
[lkml]   [2022]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC PATCH v2 2/6] dt-bindings: opp: accept array of frequencies
    Date
    Devices might need to control several clocks when scaling the frequency
    and voltage. Allow passing array of clock frequencies, similarly to the
    voltages.

    Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ---
    Documentation/devicetree/bindings/opp/opp-v2-base.yaml | 8 ++++++++
    1 file changed, 8 insertions(+)

    diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    index 76c8acd981b3..1d7216008f95 100644
    --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    @@ -50,6 +50,14 @@ patternProperties:
    property to uniquely identify the OPP nodes exists. Devices like power
    domains must have another (implementation dependent) property.

    + This can be also an array of frequencies for each clock provided to the
    + device. In such case value of 0 means the clock frequency should not
    + be configured for given clock.
    + minItems: 1
    + maxItems: 16
    + items:
    + maxItems: 1
    +
    opp-microvolt:
    description: |
    Voltage for the OPP
    --
    2.32.0
    \
     
     \ /
      Last update: 2022-04-11 17:45    [W:4.042 / U:0.404 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site