lkml.org 
[lkml]   [2022]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 0/2] Ensure High and Low periods of SCL are correct
From
Hi,

On 09/04/2022 18:43, Lucas Tanure wrote:
> The default duty cycle of 33% is less than the required
> by the I2C specs for the LOW period of the SCL clock at
> 100KHz bus speed.
>
> So, for 100Khz or less, use 50%H/50%L duty cycle, and
> for the clock above 100Khz, use 40%H/60%L duty cycle.
> That ensures the low period of SCL is always more than
> the minimum required by the specs at any given frequency.
>
> I did a few measures on the Khadas Vim3 board:
>
> i2c_AO (i2c@5000):
>
> Before the patchset, I got:
> - 100KHz: 3.338us HIGH, 6.746us LOW, 33%/67%, Freq 99KHz (Not Valid tHIGH < 4.0us)
> - 400KHz: 860ns HIGH, 1.734us LOW, 33.15%/62.85%, Freq 385.505KHz (Valid)
> - 1000KHz: 362ns HIGH, 732ns LOW, 33.09%/66.91%, Freq 914.077KHz (Valid)
>
> With the patchset
> - 100KHz: 4.952us HIGH, 5.134us LOW, 49%/51%, Freq 99KHz (Valid)
> - 400KHz: 966ns HIGH, 1.628us LOW, 37.24%/62.76%, Freq 385.505KHz (Valid)
> - 1000KHz: 372ns HIGH, 720ns LOW, 34.07%/65.93%, Freq 915.741KHz (Valid)
>
> i2c3 (i2c@1c000):
>
> Before the patchset, I got:
> - 100KHz: 3.348us HIGH, 6.704us LOW, 33%/67%, Freq 99.5KHz (Not Valid tHIGH < 4.0us)
> - 400KHz: 864ns HIGH, 1.69us LOW, 33.83%/62.17%, Freq 391.543KHz (Valid)
> - 1000KHz: 360ns HIGH, 690ns LOW, 34.29%/65.71%, Freq 952.381KHz (Valid)
>
> With the patchset
> - 100KHz: 4.958us HIGH, 5.092us LOW, 49%/51%, Freq 99KHz (Valid)
> - 400KHz: 970ns HIGH, 1.582us LOW, 38%/62%, Freq 391.85KHz (Valid)
> - 1000KHz: 370ns HIGH, 680ns LOW, 35.24%/64.76%, Freq 952.57KHz (Valid)
>
> v2 changelog:
> - Keep the previous calculation for Meson6
> - Use I2C_MAX_STANDARD_MODE_FREQ
> - move the comment before the if()
> - use FIELD_PREP for setting div_l
> - Drop removal of meson_i2c_data
>
> Previous versions:
> V1: https://lkml.org/lkml/2022/3/26/109
>
> Lucas Tanure (2):
> i2c: meson: Use _SHIFT and _MASK for register definitions
> i2c: meson: Use 50% duty cycle for I2C clock
>
> drivers/i2c/busses/i2c-meson.c | 111 ++++++++++++++++++++++++---------
> 1 file changed, 82 insertions(+), 29 deletions(-)
>

Thanks a lot for the timings !

I think it's ok to be applied,

Neil

\
 
 \ /
  Last update: 2022-04-11 09:32    [W:0.140 / U:1.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site