lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] pinctrl: ingenic: Fix regmap on X series SoCs
Hi Aidan,

Le jeu., févr. 24 2022 at 14:58:22 +0000, Aidan MacDonald
<aidanmacdonald.0x0@gmail.com> a écrit :
> The X series Ingenic SoCs have a shadow GPIO group which is at a
> higher
> offset than the other groups, and is used for all GPIO configuration.
> The regmap did not take this offset into account and set max_register
> too low, so the regmap API blocked writes to the shadow group, which
> made the pinctrl driver unable to configure any pins.
>
> Fix this by adding regmap access tables to the chip info.
>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> v1:
> https://lore.kernel.org/linux-mips/20220209230452.19535-1-aidanmacdonald.0x0@gmail.com/
>
> drivers/pinctrl/pinctrl-ingenic.c | 53
> ++++++++++++++++++++++++++++++-
> 1 file changed, 52 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c
> b/drivers/pinctrl/pinctrl-ingenic.c
> index 2712f51eb238..074c94edd90b 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -119,6 +119,9 @@ struct ingenic_chip_info {
> unsigned int num_functions;
>
> const u32 *pull_ups, *pull_downs;
> +
> + unsigned int max_register;
> + const struct regmap_access_table* access_table;
> };
>
> struct ingenic_pinctrl {
> @@ -228,6 +231,7 @@ static const struct ingenic_chip_info
> jz4730_chip_info = {
> .num_functions = ARRAY_SIZE(jz4730_functions),
> .pull_ups = jz4730_pull_ups,
> .pull_downs = jz4730_pull_downs,
> + .max_register = 4 * 0x30 - 4,
> };
>
> static const u32 jz4740_pull_ups[4] = {
> @@ -337,6 +341,7 @@ static const struct ingenic_chip_info
> jz4740_chip_info = {
> .num_functions = ARRAY_SIZE(jz4740_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static int jz4725b_mmc0_1bit_pins[] = { 0x48, 0x49, 0x5c, };
> @@ -439,6 +444,7 @@ static const struct ingenic_chip_info
> jz4725b_chip_info = {
> .num_functions = ARRAY_SIZE(jz4725b_functions),
> .pull_ups = jz4740_pull_ups,
> .pull_downs = jz4740_pull_downs,
> + .max_register = 4 * 0x100 - 4,
> };
>
> static const u32 jz4750_pull_ups[6] = {
> @@ -576,6 +582,7 @@ static const struct ingenic_chip_info
> jz4750_chip_info = {
> .num_functions = ARRAY_SIZE(jz4750_functions),
> .pull_ups = jz4750_pull_ups,
> .pull_downs = jz4750_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4755_pull_ups[6] = {
> @@ -741,6 +748,7 @@ static const struct ingenic_chip_info
> jz4755_chip_info = {
> .num_functions = ARRAY_SIZE(jz4755_functions),
> .pull_ups = jz4755_pull_ups,
> .pull_downs = jz4755_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4760_pull_ups[6] = {
> @@ -1089,6 +1097,7 @@ static const struct ingenic_chip_info
> jz4760_chip_info = {
> .num_functions = ARRAY_SIZE(jz4760_functions),
> .pull_ups = jz4760_pull_ups,
> .pull_downs = jz4760_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4770_pull_ups[6] = {
> @@ -1429,6 +1438,7 @@ static const struct ingenic_chip_info
> jz4770_chip_info = {
> .num_functions = ARRAY_SIZE(jz4770_functions),
> .pull_ups = jz4770_pull_ups,
> .pull_downs = jz4770_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 jz4775_pull_ups[7] = {
> @@ -1702,6 +1712,7 @@ static const struct ingenic_chip_info
> jz4775_chip_info = {
> .num_functions = ARRAY_SIZE(jz4775_functions),
> .pull_ups = jz4775_pull_ups,
> .pull_downs = jz4775_pull_downs,
> + .max_register = 7 * 0x100 - 4,
> };
>
> static const u32 jz4780_pull_ups[6] = {
> @@ -1966,6 +1977,7 @@ static const struct ingenic_chip_info
> jz4780_chip_info = {
> .num_functions = ARRAY_SIZE(jz4780_functions),
> .pull_ups = jz4780_pull_ups,
> .pull_downs = jz4780_pull_downs,
> + .max_register = 6 * 0x100 - 4,
> };
>
> static const u32 x1000_pull_ups[4] = {
> @@ -2179,6 +2191,17 @@ static const struct function_desc
> x1000_functions[] = {
> { "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
> };
>
> +static const struct regmap_range x1000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x400 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X1500 */
> +static const struct regmap_access_table x1000_access_table = {
> + .yes_ranges = x1000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1000_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x100,
> @@ -2189,6 +2212,7 @@ static const struct ingenic_chip_info
> x1000_chip_info = {
> .num_functions = ARRAY_SIZE(x1000_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
> @@ -2300,6 +2324,7 @@ static const struct ingenic_chip_info
> x1500_chip_info = {
> .num_functions = ARRAY_SIZE(x1500_functions),
> .pull_ups = x1000_pull_ups,
> .pull_downs = x1000_pull_downs,
> + .access_table = &x1000_access_table,
> };
>
> static const u32 x1830_pull_ups[4] = {
> @@ -2506,6 +2531,16 @@ static const struct function_desc
> x1830_functions[] = {
> { "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
> };
>
> +static const struct regmap_range x1830_access_ranges[] = {
> + regmap_reg_range(0x0000, 0x4000 - 4),
> + regmap_reg_range(0x7000, 0x8000 - 4),
> +};
> +
> +static const struct regmap_access_table x1830_access_table = {
> + .yes_ranges = x1830_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x1830_chip_info = {
> .num_chips = 4,
> .reg_offset = 0x1000,
> @@ -2516,6 +2551,7 @@ static const struct ingenic_chip_info
> x1830_chip_info = {
> .num_functions = ARRAY_SIZE(x1830_functions),
> .pull_ups = x1830_pull_ups,
> .pull_downs = x1830_pull_downs,
> + .access_table = &x1830_access_table,
> };
>
> static const u32 x2000_pull_ups[5] = {
> @@ -2969,6 +3005,17 @@ static const struct function_desc
> x2000_functions[] = {
> { "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
> };
>
> +static const struct regmap_range x2000_access_ranges[] = {
> + regmap_reg_range(0x000, 0x500 - 4),
> + regmap_reg_range(0x700, 0x800 - 4),
> +};
> +
> +/* shared with X2100 */
> +static const struct regmap_access_table x2000_access_table = {
> + .yes_ranges = x2000_access_ranges,
> + .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
> +};
> +
> static const struct ingenic_chip_info x2000_chip_info = {
> .num_chips = 5,
> .reg_offset = 0x100,
> @@ -2979,6 +3026,7 @@ static const struct ingenic_chip_info
> x2000_chip_info = {
> .num_functions = ARRAY_SIZE(x2000_functions),
> .pull_ups = x2000_pull_ups,
> .pull_downs = x2000_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static const u32 x2100_pull_ups[5] = {
> @@ -3189,6 +3237,7 @@ static const struct ingenic_chip_info
> x2100_chip_info = {
> .num_functions = ARRAY_SIZE(x2100_functions),
> .pull_ups = x2100_pull_ups,
> .pull_downs = x2100_pull_downs,
> + .access_table = &x2000_access_table,
> };
>
> static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8
> reg)
> @@ -4168,7 +4217,9 @@ static int __init ingenic_pinctrl_probe(struct
> platform_device *pdev)
> return PTR_ERR(base);
>
> regmap_config = ingenic_pinctrl_regmap_config;
> - regmap_config.max_register = chip_info->num_chips *
> chip_info->reg_offset;
> + regmap_config.rd_table = chip_info->access_table;
> + regmap_config.wr_table = chip_info->access_table;
> + regmap_config.max_register = chip_info->max_register;

You could do something like this:
if (chip_info->access_table) {
regmap_config.rd_table = chip_info->access_table;
regmap_config.wr_table = chip_info->access_table;
} else {
regmap_config.max_register = chip_info->num_chips *
chip_info->reg_offset;
}

Then you wouldn't need to add a .max_register field for every other SoC.

Cheers,
-Paul
>
> jzpc->map = devm_regmap_init_mmio(dev, base, &regmap_config);
> if (IS_ERR(jzpc->map)) {
> --
> 2.34.1
>


\
 
 \ /
  Last update: 2022-03-07 18:37    [W:0.125 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site