lkml.org 
[lkml]   [2022]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/12] dt-bindings: ufs: add common platform bindings
Date
Add bindings for common parts (platform) of Universal Flash Storage
(UFS) Host Controllers in dtschema format.

Include also the bindings directory in the UFS maintainers entry.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../devicetree/bindings/ufs/ufs-common.yaml | 82 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml

diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 000000000000..47a4e9e1a775
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@samsung.com>
+ - Avri Altman <avri.altman@wdc.com>
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ freq-table-hz:
+ items:
+ items:
+ - description: Minimum frequency for given clock in Hz
+ - description: Maximum frequency for given clock in Hz
+ description: |
+ Array of <min max> operating frequencies in Hz stored in the same order
+ as the clocks property. If this property is not defined or a value in the
+ array is "0" then it is assumed that the frequency is set by the parent
+ clock or a fixed rate clock source.
+
+ interrupts:
+ maxItems: 1
+
+ lanes-per-direction:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ default: 2
+ description:
+ Number of lanes available per direction. Note that it is assume same
+ number of lanes is used both directions at once.
+
+ vdd-hba-supply:
+ description:
+ Phandle to UFS host controller supply regulator node.
+
+ vcc-supply:
+ description:
+ Phandle to VCC supply regulator node.
+
+ vccq-supply:
+ description:
+ Phandle to VCCQ supply regulator node.
+
+ vccq2-supply:
+ description:
+ Phandle to VCCQ2 supply regulator node.
+
+ vcc-supply-1p8:
+ type: boolean
+ description:
+ For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+ boolean property when set, specifies to use low voltage range of
+ 1.7-1.95V. Note for external UFS cards this property is invalid and valid
+ VCC range is always 2.7-3.6V.
+
+ vcc-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCC supply.
+
+ vccq-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ supply.
+
+ vccq2-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+ freq-table-hz: [ 'clocks' ]
+
+required:
+ - interrupts
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index d7ea92ce1b1d..ef16268b6ca6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20100,6 +20100,7 @@ R: Alim Akhtar <alim.akhtar@samsung.com>
R: Avri Altman <avri.altman@wdc.com>
L: linux-scsi@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/ufs/
F: Documentation/scsi/ufs.rst
F: drivers/scsi/ufs/

--
2.32.0
\
 
 \ /
  Last update: 2022-03-06 12:13    [W:0.078 / U:1.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site