lkml.org 
[lkml]   [2022]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/2] drm/aspeed: Add 1024x768 mode for AST2600
Date
Update the aspeed_gfx_set_clk with display width.
At AST2600, the display clock could be coming from
HPLL clock / 16 = 75MHz. It would fit 1024x768@70Hz.
Another chip will still keep 800x600.

Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 12 ++++++----
drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 29 ++++++++++++++++++++----
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 16 +++++++++++--
drivers/gpu/drm/aspeed/aspeed_gfx_out.c | 14 +++++++++++-
4 files changed, 60 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index eb4c267cde5e..c7aefee0657a 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -109,11 +109,15 @@ int aspeed_gfx_create_output(struct drm_device *drm);
#define CRT_THROD_HIGH(x) ((x) << 8)

/* SCU control */
-#define SCU_G6_CLK_COURCE 0x300
+#define G6_CLK_SOURCE 0x300
+#define G6_CLK_SOURCE_MASK (BIT(8) | BIT(9) | BIT(10))
+#define G6_CLK_SOURCE_HPLL (BIT(8) | BIT(9) | BIT(10))
+#define G6_CLK_SOURCE_USB BIT(9)
+#define G6_CLK_SEL3 0x308
+#define G6_CLK_DIV_MASK 0x3F000
+#define G6_CLK_DIV_16 (BIT(16)|BIT(15)|BIT(13)|BIT(12))
+#define G6_USB_40_CLK BIT(9)

/* GFX FLAGS */
#define CLK_MASK BIT(0)
#define CLK_G6 BIT(0)
-
-#define G6_CLK_MASK (BIT(8) | BIT(9) | BIT(10))
-#define G6_USB_40_CLK BIT(9)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index a24fab22eac4..5829be9c7c67 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -23,6 +23,28 @@ drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe)
return container_of(pipe, struct aspeed_gfx, pipe);
}

+static void aspeed_gfx_set_clock_source(struct aspeed_gfx *priv, int mode_width)
+{
+ regmap_update_bits(priv->scu, G6_CLK_SOURCE, G6_CLK_SOURCE_MASK, 0x0);
+ regmap_update_bits(priv->scu, G6_CLK_SEL3, G6_CLK_DIV_MASK, 0x0);
+
+ switch (mode_width) {
+ case 1024:
+ /* hpll div 16 = 75Mhz */
+ regmap_update_bits(priv->scu, G6_CLK_SOURCE,
+ G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_HPLL);
+ regmap_update_bits(priv->scu, G6_CLK_SEL3,
+ G6_CLK_DIV_MASK, G6_CLK_DIV_16);
+ break;
+ case 800:
+ default:
+ /* usb 40Mhz */
+ regmap_update_bits(priv->scu, G6_CLK_SOURCE,
+ G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_USB);
+ break;
+ }
+}
+
static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp)
{
struct drm_crtc *crtc = &priv->pipe.crtc;
@@ -77,12 +99,11 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
}

-static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
+static void aspeed_gfx_set_clk(struct aspeed_gfx *priv, int mode_width)
{
switch (priv->flags & CLK_MASK) {
case CLK_G6:
- regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
- regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
+ aspeed_gfx_set_clock_source(priv, mode_width);
break;
default:
break;
@@ -99,7 +120,7 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
if (err)
return;

- aspeed_gfx_set_clk(priv);
+ aspeed_gfx_set_clk(priv, m->hdisplay);

#if 0
/* TODO: we have only been able to test with the 40MHz USB clock. The
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index af56ffdccc65..e1a814aebc2d 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -110,6 +110,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {

static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
{
+ struct aspeed_gfx *priv = to_aspeed_gfx(drm);
int ret;

ret = drmm_mode_config_init(drm);
@@ -118,8 +119,18 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)

drm->mode_config.min_width = 0;
drm->mode_config.min_height = 0;
- drm->mode_config.max_width = 800;
- drm->mode_config.max_height = 600;
+
+ switch (priv->flags & CLK_MASK) {
+ case CLK_G6:
+ drm->mode_config.max_width = 1024;
+ drm->mode_config.max_height = 768;
+ break;
+ default:
+ drm->mode_config.max_width = 800;
+ drm->mode_config.max_height = 600;
+ break;
+ }
+
drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;

return ret;
@@ -167,6 +178,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
+ priv->flags = config->gfx_flags;

priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
if (IS_ERR(priv->scu)) {
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
index 6759cb88415a..5d5e04f15c59 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
@@ -10,7 +10,19 @@

static int aspeed_gfx_get_modes(struct drm_connector *connector)
{
- return drm_add_modes_noedid(connector, 800, 600);
+ struct aspeed_gfx *priv = container_of(connector, struct aspeed_gfx, connector);
+ int mode_count = 0;
+
+ switch (priv->flags & CLK_MASK) {
+ case CLK_G6:
+ mode_count = drm_add_modes_noedid(connector, 1024, 768);
+ break;
+ default:
+ mode_count = drm_add_modes_noedid(connector, 800, 600);
+ break;
+ }
+
+ return mode_count;
}

static const struct
--
2.17.1
\
 
 \ /
  Last update: 2022-03-04 07:33    [W:0.079 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site