Messages in this thread | | | Date | Fri, 4 Mar 2022 12:22:57 +0000 | Subject | Re: [PATCH v7 01/11] iommu: Add DMA ownership management interfaces | From | Robin Murphy <> |
| |
On 2022-03-04 10:43, Lu Baolu wrote: > Hi Eric, > > On 2022/3/4 18:34, Eric Auger wrote: >> I hit a WARN_ON() when unbinding an e1000e driver just after boot: >> >> sudo modprobe -v vfio-pci >> echo vfio-pci | sudo tee -a >> /sys/bus/pci/devices/0004:01:00.0/driver_override >> vfio-pci >> echo 0004:01:00.0 | sudo tee -a /sys/bus/pci/drivers/e1000e/unbind >> >> >> [ 390.042811] ------------[ cut here ]------------ >> [ 390.046468] WARNING: CPU: 42 PID: 5589 at drivers/iommu/iommu.c:3123 >> iommu_device_unuse_default_domain+0x68/0x100 >> [ 390.056710] Modules linked in: vfio_pci vfio_pci_core vfio_virqfd >> vfio_iommu_type1 vfio xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT >> nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack >> nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill >> sunrpc vfat fat mlx5_ib ib_uverbs ib_core acpi_ipmi ipmi_ssif >> ipmi_devintf ipmi_msghandler cppc_cpufreq drm xfs libcrc32c mlx5_core sg >> mlxfw crct10dif_ce tls ghash_ce sha2_ce sha256_arm64 sha1_ce sbsa_gwdt >> e1000e psample sdhci_acpi ahci_platform sdhci libahci_platform qcom_emac >> mmc_core hdma hdma_mgmt dm_mirror dm_region_hash dm_log dm_mod fuse >> [ 390.110618] CPU: 42 PID: 5589 Comm: tee Kdump: loaded Not tainted >> 5.17.0-rc4-lu-v7-official+ #24 >> [ 390.119384] Hardware name: WIWYNN QDF2400 Reference Evaluation >> Platform CV90-LA115-P120/QDF2400 Customer Reference Board, BIOS 0ACJA570 >> 11/05/2018 >> [ 390.132492] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS >> BTYPE=--) >> [ 390.139436] pc : iommu_device_unuse_default_domain+0x68/0x100 >> [ 390.145165] lr : iommu_device_unuse_default_domain+0x38/0x100 >> [ 390.150894] sp : ffff80000fbb3bc0 >> [ 390.154193] x29: ffff80000fbb3bc0 x28: ffff03c0cf6b2400 x27: >> 0000000000000000 >> [ 390.161311] x26: 0000000000000000 x25: 0000000000000000 x24: >> ffff03c0c7cc5720 >> [ 390.168429] x23: ffff03c0c2b9d150 x22: ffffb4e61df223f8 x21: >> ffffb4e61df223f8 >> [ 390.175547] x20: ffff03c7c03c3758 x19: ffff03c7c03c3700 x18: >> 0000000000000000 >> [ 390.182665] x17: 0000000000000000 x16: 0000000000000000 x15: >> 0000000000000000 >> [ 390.189783] x14: 0000000000000000 x13: 0000000000000030 x12: >> ffff03c0d519cd80 >> [ 390.196901] x11: 7f7f7f7f7f7f7f7f x10: 0000000000000dc0 x9 : >> ffffb4e620b54f8c >> [ 390.204019] x8 : ffff03c0cf6b3220 x7 : ffff4ef132bba000 x6 : >> 00000000000000ff >> [ 390.211137] x5 : ffff03c0c2b9f108 x4 : ffff03c0d51f6438 x3 : >> 0000000000000000 >> [ 390.218255] x2 : ffff03c0cf6b2400 x1 : 0000000000000000 x0 : >> 0000000000000000 >> [ 390.225374] Call trace: >> [ 390.227804] iommu_device_unuse_default_domain+0x68/0x100 >> [ 390.233187] pci_dma_cleanup+0x38/0x44 >> [ 390.236919] __device_release_driver+0x1a8/0x260 >> [ 390.241519] device_driver_detach+0x50/0xd0 >> [ 390.245686] unbind_store+0xf8/0x120 >> [ 390.249245] drv_attr_store+0x30/0x44 >> [ 390.252891] sysfs_kf_write+0x50/0x60 >> [ 390.256537] kernfs_fop_write_iter+0x134/0x1cc >> [ 390.260964] new_sync_write+0xf0/0x18c >> [ 390.264696] vfs_write+0x230/0x2d0 >> [ 390.268082] ksys_write+0x74/0x100 >> [ 390.271467] __arm64_sys_write+0x28/0x3c >> [ 390.275373] invoke_syscall.constprop.0+0x58/0xf0 >> [ 390.280061] el0_svc_common.constprop.0+0x160/0x164 >> [ 390.284922] do_el0_svc+0x34/0xcc >> [ 390.288221] el0_svc+0x30/0x140 >> [ 390.291346] el0t_64_sync_handler+0xa4/0x130 >> [ 390.295599] el0t_64_sync+0x1a0/0x1a4 >> [ 390.299245] ---[ end trace 0000000000000000 ]--- >> >> >> I put some traces in the code and I can see that >> iommu_device_use_default_domain() effectively is called on >> 0004:01:00.0 e1000e device on pci_dma_configure() but at that time the >> iommu group is NULL: >> [ 10.569427] e1000e 0004:01:00.0: ------ ENTRY pci_dma_configure >> driver_managed_area=0 >> [ 10.569431] e1000e 0004:01:00.0: **** >> iommu_device_use_default_domain ENTRY >> [ 10.569433] e1000e 0004:01:00.0: **** >> iommu_device_use_default_domain no group >> [ 10.569435] e1000e 0004:01:00.0: pci_dma_configure >> iommu_device_use_default_domain returned 0 >> [ 10.569492] e1000e 0004:01:00.0: Adding to iommu group 3 >> >> ^^^the group is added after the >> iommu_device_use_default_domain() call >> So the group->owner_cnt is not incremented as expected. > > Thank you for reporting this. Do you have any idea why the driver is > loaded before iommu_probe_device()?
Urgh, this is the horrible firmware-data-ordering thing again. The stuff I've been saying about having to rework the whole .dma_configure mechanism in the near future is to fix this properly.
The summary is that in patch #4, calling iommu_device_use_default_domain() *before* {of,acpi}_dma_configure is currently a problem. As things stand, the IOMMU driver ignored the initial iommu_probe_device() call when the device was added, since at that point it had no fwspec yet. In this situation, {of,acpi}_iommu_configure() are retriggering iommu_probe_device() after the IOMMU driver has seen the firmware data via .of_xlate to learn that it it actually responsible for the given device.
Robin.
| |