lkml.org 
[lkml]   [2022]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] clk: sifive: duplicate the macro definitions for the time being
Date
This is a temporary patch in whole patch set. We are going to change the
macro name in dt-binding, in order to avoid breaking the driver build
and git bisect, add these macro definitions for the time being, and we
will remove them later.

Signed-off-by: Zong Li <zong.li@sifive.com>
---
drivers/clk/sifive/fu540-prci.c | 6 +++++-
drivers/clk/sifive/fu740-prci.c | 11 ++++++++++-
2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index 29bab915003c..9e13119066eb 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -20,9 +20,13 @@

#include <dt-bindings/clock/sifive-fu540-prci.h>

-#include "fu540-prci.h"
#include "sifive-prci.h"

+#define PRCI_CLK_COREPLL 0
+#define PRCI_CLK_DDRPLL 1
+#define PRCI_CLK_GEMGXLPLL 2
+#define PRCI_CLK_TLCLK 3
+
/* PRCI integration data for each WRPLL instance */

static struct __prci_wrpll_data __prci_corepll_data = {
diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
index 53f6e00a03b9..7141a22d90e3 100644
--- a/drivers/clk/sifive/fu740-prci.c
+++ b/drivers/clk/sifive/fu740-prci.c
@@ -8,9 +8,18 @@

#include <dt-bindings/clock/sifive-fu740-prci.h>

-#include "fu540-prci.h"
#include "sifive-prci.h"

+#define PRCI_CLK_COREPLL 0
+#define PRCI_CLK_DDRPLL 1
+#define PRCI_CLK_GEMGXLPLL 2
+#define PRCI_CLK_DVFSCOREPLL 3
+#define PRCI_CLK_HFPCLKPLL 4
+#define PRCI_CLK_CLTXPLL 5
+#define PRCI_CLK_TLCLK 6
+#define PRCI_CLK_PCLK 7
+#define PRCI_CLK_PCIE_AUX 8
+
/* PRCI integration data for each WRPLL instance */

static struct __prci_wrpll_data __prci_corepll_data = {
--
2.31.1
\
 
 \ /
  Last update: 2022-03-04 11:04    [W:0.083 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site