lkml.org 
[lkml]   [2022]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[irqchip: irq/irqchip-next] irqchip/meson-gpio: Add support for meson s4 SoCs
The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID: d8a61a2ec7e75723083d33800423b151106922e0
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/d8a61a2ec7e75723083d33800423b151106922e0
Author: Qianggui Song <qianggui.song@amlogic.com>
AuthorDate: Fri, 25 Feb 2022 13:52:06 +08:00
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 04 Mar 2022 17:01:04

irqchip/meson-gpio: Add support for meson s4 SoCs

The meson s4 SoCs support 12 gpio irq lines compared with previous
serial chips and have something different, details are as below.

IRQ Number:
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 13 pins on bank B

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-5-qianggui.song@amlogic.com
---
drivers/irqchip/irq-meson-gpio.c | 67 +++++++++++++++++++++++++++++++-
1 file changed, 67 insertions(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 7b5863e..a7ddbca 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -26,6 +26,8 @@

/* use for A1 like chips */
#define REG_PIN_A1_SEL 0x04
+/* Used for s4 chips */
+#define REG_EDGE_POL_S4 0x1c

/*
* Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
@@ -53,6 +55,8 @@ static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
unsigned int type, u32 *channel_hwirq);
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int type, u32 *channel_hwirq);

struct irq_ctl_ops {
void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -101,6 +105,17 @@ struct meson_gpio_irq_params {
.pin_sel_mask = 0x7f, \
.nr_channels = 8, \

+#define INIT_MESON_S4_COMMON_DATA(irqs) \
+ INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init, \
+ meson_a1_gpio_irq_sel_pin, \
+ meson_s4_gpio_irq_set_type) \
+ .support_edge_both = true, \
+ .edge_both_offset = 0, \
+ .edge_single_offset = 12, \
+ .pol_low_offset = 0, \
+ .pin_sel_mask = 0xff, \
+ .nr_channels = 12, \
+
static const struct meson_gpio_irq_params meson8_params = {
INIT_MESON8_COMMON_DATA(134)
};
@@ -131,6 +146,10 @@ static const struct meson_gpio_irq_params a1_params = {
INIT_MESON_A1_COMMON_DATA(62)
};

+static const struct meson_gpio_irq_params s4_params = {
+ INIT_MESON_S4_COMMON_DATA(82)
+};
+
static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -140,6 +159,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
+ { .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
{ }
};

@@ -308,6 +328,53 @@ static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
return 0;
}

+/*
+ * gpio irq relative registers for s4
+ * -PADCTRL_GPIO_IRQ_CTRL0
+ * bit[31]: enable/disable all the irq lines
+ * bit[12-23]: single edge trigger
+ * bit[0-11]: polarity trigger
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[X]
+ * bit[0-16]: 7 bits to choose gpio source for irq line 2*[X] - 2
+ * bit[16-22]:7 bits to choose gpio source for irq line 2*[X] - 1
+ * where X = 1-6
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[7]
+ * bit[0-11]: both edge trigger
+ */
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int type, u32 *channel_hwirq)
+{
+ u32 val = 0;
+ unsigned int idx;
+ const struct meson_gpio_irq_params *params;
+
+ params = ctl->params;
+ idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
+
+ type &= IRQ_TYPE_SENSE_MASK;
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(idx), 0);
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ val |= BIT(ctl->params->edge_both_offset + idx);
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+ BIT(ctl->params->edge_both_offset + idx), val);
+ return 0;
+ }
+
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->pol_low_offset + idx);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->edge_single_offset + idx);
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+ BIT(idx) | BIT(12 + idx), val);
+ return 0;
+};
+
static unsigned int meson_gpio_irq_type_output(unsigned int type)
{
unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
\
 
 \ /
  Last update: 2022-09-17 16:15    [W:0.065 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site