lkml.org 
[lkml]   [2022]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] dt-bindings: dma: Add Apple ADMAC
From
Date


> On 31. 3. 2022, at 19:21, Rob Herring <robh@kernel.org> wrote:
>
> On Thu, Mar 31, 2022 at 06:13:53PM +0200, Martin Povišer wrote:
>>
>>> On 31. 3. 2022, at 16:10, Vinod Koul <vkoul@kernel.org> wrote:
>>>
>>> On 31-03-22, 09:06, Martin Povišer wrote:
>>>>
>>>>> On 31. 3. 2022, at 8:50, Martin Povišer <povik@cutebit.org> wrote:
>>>>>>
>>>>>> On 31. 3. 2022, at 7:23, Vinod Koul <vkoul@kernel.org> wrote:
>>>>>>
>>>>>> On 30-03-22, 18:44, Martin Povišer wrote:
>>>>>>> Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio
>>>>>>> samples on Apple SoCs from the "Apple Silicon" family.
>>>>>>>
>>>>>>> Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
>>>>>>> ---
>>>>>>> .../devicetree/bindings/dma/apple,admac.yaml | 73 +++++++++++++++++++
>>>>>>> 1 file changed, 73 insertions(+)
>>>>>>> create mode 100644 Documentation/devicetree/bindings/dma/apple,admac.yaml
>>>>>>>
>>>>>>> diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..34f76a9a2983
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
>>>>>
>>>>>>> + apple,internal-irq-destination:
>>>>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>> + description: Index influencing internal routing of the IRQs
>>>>>>> + within the peripheral.
>>>>>>
>>>>>> do you have more details for this, is this for peripheral and if so
>>>>>> suited to be in dam-cells?
>>>>>
>>>>> By peripheral I meant the DMA controller itself here.
>>>
>>> Dmaengine convention is that peripheral is device which we are doing dma
>>> to/from, like audio controller/fifo here
>>>
>>>>> Effectively the controller has four independent IRQ outputs and the driver
>>>>> needs to know which one we are using. (It need not be the same output even
>>>>> for different ADMAC instances on one die.)
>>>
>>> That smells like a mux to me.. why not use dma-requests for this?
>>
>> I am not sure that’s right. Reading the dmaengine docs, DMA requests seem to have
>> to do with the DMA-controller-to-peripheral connection, but the proposed property
>> tells us which of four independent IRQ outputs of the DMA controller we actually
>> have in the interrupts= property. That is, it has to do with the DMA-controller-to-CPU
>> connection.
>
> Why do they have to be different? IRQF_SHARED doesn't work?

It’s not that the IRQ outputs of different controllers are overlaid. It’s
that e.g. first output of controller A is hooked up to some input of the AP’s
interrupt controller, the third output of controller B is hooked to another
input, but for all we know the other controller outputs lead to nowhere or
to some coprocessor.

> Why can't you request each IRQ until it succeeds?
>
> What happens when there are 5 DMA controllers?
>
> If using more than 1 interrupt will never work or be needed, then I'm
> inclined to say just describe that 1 interrupt. Yes, that goes against
> 'describe all the h/w', but there's always exceptions. I suppose you
> need to know which 'interrupts' index (output) you are using. If so, you
> can do something like this:
>
> interrupts = <-1>, <-1>, <3 0>, <-1>;

That’s actually exactly what I want! In next iteration of the binding I will
drop the vendor property and do that.

>
> Rob

Martin

\
 
 \ /
  Last update: 2022-03-31 21:10    [W:0.034 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site