lkml.org 
[lkml]   [2022]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mm: migrate: set demotion targets differently
From


On 3/31/2022 4:58 PM, Huang, Ying wrote:
> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>
>> "Huang, Ying" <ying.huang@intel.com> writes:
>>
>>> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>>>
>>>> "Huang, Ying" <ying.huang@intel.com> writes:
>>>>
>>>>> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
>>>>>
>>>>>> "Huang, Ying" <ying.huang@intel.com> writes:
>>>>>>
>>>>>>> Hi, Jagdish,
>>>>>>>
>>>>>>> Jagdish Gediya <jvgediya@linux.ibm.com> writes:
>>>>>>>
>>>>>>
>>>>>> ...
>>>>>>
>>>>>>>> e.g. with below NUMA topology, where node 0 & 1 are
>>>>>>>> cpu + dram nodes, node 2 & 3 are equally slower memory
>>>>>>>> only nodes, and node 4 is slowest memory only node,
>>>>>>>>
>>>>>>>> available: 5 nodes (0-4)
>>>>>>>> node 0 cpus: 0 1
>>>>>>>> node 0 size: n MB
>>>>>>>> node 0 free: n MB
>>>>>>>> node 1 cpus: 2 3
>>>>>>>> node 1 size: n MB
>>>>>>>> node 1 free: n MB
>>>>>>>> node 2 cpus:
>>>>>>>> node 2 size: n MB
>>>>>>>> node 2 free: n MB
>>>>>>>> node 3 cpus:
>>>>>>>> node 3 size: n MB
>>>>>>>> node 3 free: n MB
>>>>>>>> node 4 cpus:
>>>>>>>> node 4 size: n MB
>>>>>>>> node 4 free: n MB
>>>>>>>> node distances:
>>>>>>>> node 0 1 2 3 4
>>>>>>>> 0: 10 20 40 40 80
>>>>>>>> 1: 20 10 40 40 80
>>>>>>>> 2: 40 40 10 40 80
>>>>>>>> 3: 40 40 40 10 80
>>>>>>>> 4: 80 80 80 80 10
>>>>>>>>
>>>>>>>> The existing implementation gives below demotion targets,
>>>>>>>>
>>>>>>>> node demotion_target
>>>>>>>> 0 3, 2
>>>>>>>> 1 4
>>>>>>>> 2 X
>>>>>>>> 3 X
>>>>>>>> 4 X
>>>>>>>>
>>>>>>>> With this patch applied, below are the demotion targets,
>>>>>>>>
>>>>>>>> node demotion_target
>>>>>>>> 0 3, 2
>>>>>>>> 1 3, 2
>>>>>>>> 2 3
>>>>>>>> 3 4
>>>>>>>> 4 X
>>>>>>>
>>>>>>> For such machine, I think the perfect demotion order is,
>>>>>>>
>>>>>>> node demotion_target
>>>>>>> 0 2, 3
>>>>>>> 1 2, 3
>>>>>>> 2 4
>>>>>>> 3 4
>>>>>>> 4 X
>>>>>>
>>>>>> I guess the "equally slow nodes" is a confusing definition here. Now if the
>>>>>> system consists of 2 1GB equally slow memory and the firmware doesn't want to
>>>>>> differentiate between them, firmware can present a single NUMA node
>>>>>> with 2GB capacity? The fact that we are finding two NUMA nodes is a hint
>>>>>> that there is some difference between these two memory devices. This is
>>>>>> also captured by the fact that the distance between 2 and 3 is 40 and not 10.
>>>>>
>>>>> Do you have more information about this?
>>>>
>>>> Not sure I follow the question there. I was checking shouldn't firmware
>>>> do a single NUMA node if two memory devices are of the same type? How will
>>>> optane present such a config? Both the DIMMs will have the same
>>>> proximity domain value and hence dax kmem will add them to the same NUMA
>>>> node?
>>>
>>> Sorry for confusing. I just wanted to check whether you have more
>>> information about the machine configuration above. The machines in my
>>> hand have no complex NUMA topology as in the patch description.
>>
>>
>> Even with simple topologies like below
>>
>> available: 3 nodes (0-2)
>> node 0 cpus: 0 1
>> node 0 size: 4046 MB
>> node 0 free: 3478 MB
>> node 1 cpus: 2 3
>> node 1 size: 4090 MB
>> node 1 free: 3430 MB
>> node 2 cpus:
>> node 2 size: 4074 MB
>> node 2 free: 4037 MB
>> node distances:
>> node 0 1 2
>> 0: 10 20 40
>> 1: 20 10 40
>> 2: 40 40 10
>>
>> With current code we get demotion targets assigned as below
>>
>> [ 0.337307] Demotion nodes for Node 0: 2
>> [ 0.337351] Demotion nodes for Node 1:
>> [ 0.337380] Demotion nodes for Node 2:
>>
>> I guess we should fix that to be below?
>>
>> [ 0.344554] Demotion nodes for Node 0: 2
>> [ 0.344605] Demotion nodes for Node 1: 2
>> [ 0.344638] Demotion nodes for Node 2:
>
> If the cross-socket link has enough bandwidth to accommodate the PMEM
> throughput, the new one is better. If it hasn't, the old one may be
> better. So, I think we need some kind of user space overridden support
> here. Right?
>
>> Most of the tests we are doing are using Qemu to simulate this. We
>> started looking at this to avoid using demotion completely when slow
>> memory is not present. ie, we should have a different way to identify
>> demotion targets other than node_states[N_MEMORY]. Virtualized platforms
>> can have configs with memory only NUMA nodes with DRAM and we don't
>> want to consider those as demotion targets.
>
> Even if the demotion targets are set for some node, the demotion will
> not work before enabling demotion via sysfs
> (/sys/kernel/mm/numa/demotion_enabled). So for system without slow
> memory, just don't enable demotion.
>
>> While we are at it can you let us know how topology will look on a
>> system with two optane DIMMs? Do both appear with the same
>> target_node?
>
> In my test system, multiple optane DIMMs in one socket will be
> represented as one NUMA node.
>
> I remember Baolin has different configuration.
>
> Hi, Baolin, Can you provide some information about this?

Sure. We have real machines with 2 optane DIMMs, and they are
represented as 2 numa nodes. So we want to support the target demotion
nodes can be multiple.

available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 447 MB
node 1 cpus:
node 1 size: 126969 MB
node 1 free: 84099 MB
node 2 cpus:
node 2 size: 127006 MB
node 2 free: 126925 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10

\
 
 \ /
  Last update: 2022-03-31 11:33    [W:0.049 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site