lkml.org 
[lkml]   [2022]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH net-next v2 10/11] net: mdio: of: use fwnode_mdiobus_register() in of_mdiobus_register()
Date
Now that fwnode_mdiobus_register() also handle phy registration, modify
of_mdiobus_register() to use this one but keep ilegacy scanning of
nodes that don't have a "reg" property. The behavior is a bit different
since the scanning loop will always be executed even if all nodes have
a "reg" property. However, since the "reg" property is checked in that
loop, the final outcome will be the same (ie scan only the node that
don't have a "reg" property). Since of_mdiobus_register_device() is not
used anymore, remove it.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
drivers/net/mdio/of_mdio.c | 77 +-------------------------------------
1 file changed, 1 insertion(+), 76 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 9c3cd8d3d1f6..4a7ad6704feb 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -47,36 +47,6 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
}

-static int of_mdiobus_register_device(struct mii_bus *mdio,
- struct device_node *child, u32 addr)
-{
- struct fwnode_handle *fwnode = of_fwnode_handle(child);
- struct mdio_device *mdiodev;
- int rc;
-
- mdiodev = mdio_device_create(mdio, addr);
- if (IS_ERR(mdiodev))
- return PTR_ERR(mdiodev);
-
- /* Associate the OF node with the device structure so it
- * can be looked up later.
- */
- fwnode_handle_get(fwnode);
- device_set_node(&mdiodev->dev, fwnode);
-
- /* All data is now stored in the mdiodev struct; register it. */
- rc = mdio_device_register(mdiodev);
- if (rc) {
- mdio_device_free(mdiodev);
- of_node_put(child);
- return rc;
- }
-
- dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
- child, addr);
- return 0;
-}
-
/* The following is a list of PHY compatible strings which appear in
* some DTBs. The compatible string is never matched against a PHY
* driver, so is pointless. We only expect devices which are not PHYs
@@ -133,57 +103,12 @@ EXPORT_SYMBOL(of_mdiobus_child_is_phy);
int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
{
struct device_node *child;
- bool scanphys = false;
int addr, rc;

- if (!np)
- return mdiobus_register(mdio);
-
- /* Do not continue if the node is disabled */
- if (!of_device_is_available(np))
- return -ENODEV;
-
- /* Mask out all PHYs from auto probing. Instead the PHYs listed in
- * the device tree are populated after the bus has been registered */
- mdio->phy_mask = ~0;
-
- device_set_node(&mdio->dev, of_fwnode_handle(np));
-
- /* Get bus level PHY reset GPIO details */
- mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
- of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
- mdio->reset_post_delay_us = 0;
- of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);
-
- /* Register the MDIO bus */
- rc = mdiobus_register(mdio);
+ rc = fwnode_mdiobus_register(mdio, of_fwnode_handle(np));
if (rc)
return rc;

- /* Loop over the child nodes and register a phy_device for each phy */
- for_each_available_child_of_node(np, child) {
- addr = of_mdio_parse_addr(&mdio->dev, child);
- if (addr < 0) {
- scanphys = true;
- continue;
- }
-
- if (of_mdiobus_child_is_phy(child))
- rc = of_mdiobus_register_phy(mdio, child, addr);
- else
- rc = of_mdiobus_register_device(mdio, child, addr);
-
- if (rc == -ENODEV)
- dev_err(&mdio->dev,
- "MDIO device at address %d is missing.\n",
- addr);
- else if (rc)
- goto unregister;
- }
-
- if (!scanphys)
- return 0;
-
/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
/* Skip PHYs with reg property set */
--
2.34.1
\
 
 \ /
  Last update: 2022-03-31 11:33    [W:0.150 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site