lkml.org 
[lkml]   [2022]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC] arm64: dts: ti: introduce a minimal am642 device tree
From
Hi Wadim,

On 30/03/22 7:25 pm, Wadim Egorov wrote:
> Hi Bryan,
>
>> +/* (optional) for console */
>> +&main_uart0 {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&main_uart0_pins_default>;
>> +};
>> +
>> +/* reserved for firmware */
>> +&main_uart1 {
>> +    status = "reserved";
>> +};
>
> k3-image-gen says UART0 is used as a debug interface. See
>
>
> https://git.ti.com/cgit/k3-image-gen/k3-image-gen/tree/soc/am64x/evm/board-cfg.c#n81
>
>
> So it seems that you can enable uart1 here. But people may run into a
> conflict with uart0 and k3-image-gen compiled with ENABLE_TRACE=1.
>
> If I am wrong, can you please clarify why you mark uart1 as reserved.
>

We just seem to have same macro shared across multiple SoCs,
BOARDCFG_TRACE_DST_UART0 means logs are also directed to UART. Instance
of UART used for logging is platform specific.

On AM64 SYSFW logs are directed to MAIN UART1 (MAIN UART0 is used for
linux console). I will work internally and get SYSFW documentation
updated to reflect the same. Thanks!

Regards
Vignesh

\
 
 \ /
  Last update: 2022-03-31 09:02    [W:0.096 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site