lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 1/1] gpio: add sloppy logic analyzer using polling
On Tue, Mar 29, 2022 at 11:11:26AM +0200, Wolfram Sang wrote:
> This is a sloppy logic analyzer using GPIOs. It comes with a script to
> isolate a CPU for polling. While this is definitely not a production
> level analyzer, it can be a helpful first view when remote debugging.
> Read the documentation for details.

Good enough I think,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> .../dev-tools/gpio-sloppy-logic-analyzer.rst | 91 +++++
> Documentation/dev-tools/index.rst | 1 +
> drivers/gpio/Kconfig | 17 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-sloppy-logic-analyzer.c | 340 ++++++++++++++++++
> tools/gpio/gpio-sloppy-logic-analyzer | 230 ++++++++++++
> 6 files changed, 680 insertions(+)
> create mode 100644 Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst
> create mode 100644 drivers/gpio/gpio-sloppy-logic-analyzer.c
> create mode 100755 tools/gpio/gpio-sloppy-logic-analyzer
>
> diff --git a/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst b/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst
> new file mode 100644
> index 000000000000..a9b1cd6c2fea
> --- /dev/null
> +++ b/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst
> @@ -0,0 +1,91 @@
> +=============================================
> +Linux Kernel GPIO based sloppy logic analyzer
> +=============================================
> +
> +:Author: Wolfram Sang
> +
> +Introduction
> +============
> +
> +This document briefly describes how to run the GPIO based in-kernel sloppy
> +logic analyzer running on an isolated CPU.
> +
> +The sloppy logic analyzer will utilize a few GPIO lines in input mode on a
> +system to rapidly sample these digital lines, which will, if the Nyquist
> +criteria is met, result in a time series log with approximate waveforms as they
> +appeared on these lines. One way to use it is to analyze external traffic
> +connected to these GPIO lines with wires (i.e. digital probes), acting as a
> +common logic analyzer.
> +
> +Another feature is to snoop on on-chip peripherals if the I/O cells of these
> +peripherals can be used in GPIO input mode at the same time as they are being
> +used as inputs or outputs for the peripheral. That means you could e.g. snoop
> +I2C traffic without any wiring (if your hardware supports it). In the pin
> +control subsystem such pin controllers are called "non-strict": a certain pin
> +can be used with a certain peripheral and as a GPIO input line at the same
> +time.
> +
> +Note that this is a last resort analyzer which can be affected by latencies,
> +non-deterministic code paths and non-maskable interrupts. It is called 'sloppy'
> +for a reason. However, for e.g. remote development, it may be useful to get a
> +first view and aid further debugging.
> +
> +Setup
> +=====
> +
> +Your kernel must have CONFIG_DEBUG_FS and CONFIG_CPUSETS enabled. Ideally, your
> +runtime environment does not utilize cpusets otherwise, then isolation of a CPU
> +core is easiest. If you do need cpusets, check that helper script for the
> +sloppy logic analyzer does not interfere with your other settings.
> +
> +Tell the kernel which GPIOs are used as probes. For a Device Tree based system,
> +you need to use the following bindings. Because these bindings are only for
> +debugging, there is no official schema::
> +
> + i2c-analyzer {
> + compatible = "gpio-sloppy-logic-analyzer";
> + probe-gpios = <&gpio6 21 GPIO_OPEN_DRAIN>, <&gpio6 4 GPIO_OPEN_DRAIN>;
> + probe-names = "SCL", "SDA";
> + };
> +
> +Note that you must provide a name for every GPIO specified. Currently a
> +maximum of 8 probes are supported. 32 are likely possible but are not
> +implemented yet.
> +
> +Usage
> +=====
> +
> +The logic analyzer is configurable via files in debugfs. However, it is
> +strongly recommended to not use them directly, but to use the script
> +``tools/gpio/gpio-sloppy-logic-analyzer``. Besides checking parameters more
> +extensively, it will isolate the CPU core so you will have the least
> +disturbance while measuring.
> +
> +The script has a help option explaining the parameters. For the above DT
> +snippet which analyzes an I2C bus at 400kHz on a Renesas Salvator-XS board, the
> +following settings are used: The isolated CPU shall be CPU1 because it is a big
> +core in a big.LITTLE setup. Because CPU1 is the default, we don't need a
> +parameter. The bus speed is 400kHz. So, the sampling theorem says we need to
> +sample at least at 800kHz. However, falling edges of both signals in an I2C
> +start condition happen faster, so we need a higher sampling frequency, e.g.
> +``-s 1500000`` for 1.5MHz. Also, we don't want to sample right away but wait
> +for a start condition on an idle bus. So, we need to set a trigger to a falling
> +edge on SDA while SCL stays high, i.e. ``-t 1H+2F``. Last is the duration, let
> +us assume 15ms here which results in the parameter ``-d 15000``. So,
> +altogether::
> +
> + gpio-sloppy-logic-analyzer -s 1500000 -t 1H+2F -d 15000
> +
> +Note that the process will return you back to the prompt but a sub-process is
> +still sampling in the background. Unless this has finished, you will not find a
> +result file in the current or specified directory. For the above example, we
> +will then need to trigger I2C communication::
> +
> + i2cdetect -y -r <your bus number>
> +
> +Result is a .sr file to be consumed with PulseView or sigrok-cli from the free
> +`sigrok`_ project. It is a zip file which also contains the binary sample data
> +which may be consumed by other software. The filename is the logic analyzer
> +instance name plus a since-epoch timestamp.
> +
> +.. _sigrok: https://sigrok.org/
> diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
> index 4621eac290f4..552d26e70003 100644
> --- a/Documentation/dev-tools/index.rst
> +++ b/Documentation/dev-tools/index.rst
> @@ -33,6 +33,7 @@ Documentation/dev-tools/testing-overview.rst
> kselftest
> kunit/index
> ktap
> + gpio-sloppy-logic-analyzer
>
>
> .. only:: subproject and html
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 1c211b4c63be..2a75a3ffb0ef 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1691,4 +1691,21 @@ config GPIO_SIM
>
> endmenu
>
> +menu "GPIO hardware hacking tools"
> +
> +config GPIO_SLOPPY_LOGIC_ANALYZER
> + tristate "Sloppy GPIO logic analyzer"
> + depends on (GPIOLIB || COMPILE_TEST) && CPUSETS && DEBUG_FS && EXPERT
> + help
> + This option enables support for a sloppy logic analyzer using polled
> + GPIOs. Use the 'tools/gpio/gpio-sloppy-logic-analyzer' script with
> + this driver. The script will make it easier to use and will also
> + isolate a CPU for the polling task. Note that this is a last resort
> + analyzer which can be affected by latencies, non-deterministic code
> + paths, or NMIs. However, for e.g. remote development, it may be useful
> + to get a first view and aid further debugging.
> +
> + If this driver is built as a module it will be called
> + 'gpio-sloppy-logic-analyzer'.
> +endmenu
> endif
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index edbaa3cb343c..dca6a3398cf0 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -135,6 +135,7 @@ obj-$(CONFIG_GPIO_SIFIVE) += gpio-sifive.o
> obj-$(CONFIG_GPIO_SIM) += gpio-sim.o
> obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o
> obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o
> +obj-$(CONFIG_GPIO_SLOPPY_LOGIC_ANALYZER) += gpio-sloppy-logic-analyzer.o
> obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
> obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
> obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o
> diff --git a/drivers/gpio/gpio-sloppy-logic-analyzer.c b/drivers/gpio/gpio-sloppy-logic-analyzer.c
> new file mode 100644
> index 000000000000..b96800c866b9
> --- /dev/null
> +++ b/drivers/gpio/gpio-sloppy-logic-analyzer.c
> @@ -0,0 +1,340 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Sloppy logic analyzer using GPIOs (to be run on an isolated CPU)
> + *
> + * Use the 'gpio-sloppy-logic-analyzer' script in the 'tools/gpio' folder for
> + * easier usage and further documentation. Note that this is a last resort
> + * analyzer which can be affected by latencies and non-deterministic code
> + * paths. However, for e.g. remote development, it may be useful to get a first
> + * view and aid further debugging.
> + *
> + * Copyright (C) Wolfram Sang <wsa@sang-engineering.com>
> + * Copyright (C) Renesas Electronics Corporation
> + */
> +
> +#include <linux/ctype.h>
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/init.h>
> +#include <linux/ktime.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/slab.h>
> +#include <linux/sizes.h>
> +#include <linux/timekeeping.h>
> +#include <linux/vmalloc.h>
> +
> +#define GPIO_LA_NAME "gpio-sloppy-logic-analyzer"
> +#define GPIO_LA_DEFAULT_BUF_SIZE SZ_256K
> +/* can be increased but then we need to extend the u8 buffers */
> +#define GPIO_LA_MAX_PROBES 8
> +#define GPIO_LA_NUM_TESTS 1024
> +
> +struct gpio_la_poll_priv {
> + struct mutex lock;
> + u32 buf_idx;
> + struct gpio_descs *descs;
> + unsigned long delay_ns;
> + unsigned long acq_delay;
> + struct debugfs_blob_wrapper blob;
> + struct dentry *debug_dir;
> + struct dentry *blob_dent;
> + struct debugfs_blob_wrapper meta;
> + struct device *dev;
> + unsigned int trig_len;
> + u8 *trig_data;
> +};
> +
> +static struct dentry *gpio_la_poll_debug_dir;
> +
> +static __always_inline int gpio_la_get_array(struct gpio_descs *d, unsigned long *sptr)
> +{
> + int ret;
> +
> + ret = gpiod_get_array_value(d->ndescs, d->desc, d->info, sptr);
> + if (ret == 0 && fatal_signal_pending(current))
> + ret = -EINTR;
> +
> + return ret;
> +}
> +
> +static int fops_capture_set(void *data, u64 val)
> +{
> + struct gpio_la_poll_priv *priv = data;
> + u8 *la_buf = priv->blob.data;
> + unsigned long state = 0; /* zeroed because GPIO arrays are bitfields */
> + unsigned long delay;
> + ktime_t start_time;
> + unsigned int i;
> + int ret;
> +
> + if (!val)
> + return 0;
> +
> + if (!la_buf)
> + return -ENOMEM;
> +
> + if (!priv->delay_ns)
> + return -EINVAL;
> +
> + mutex_lock(&priv->lock);
> + if (priv->blob_dent) {
> + debugfs_remove(priv->blob_dent);
> + priv->blob_dent = NULL;
> + }
> +
> + priv->buf_idx = 0;
> +
> + local_irq_disable();
> + preempt_disable_notrace();
> +
> + /* Measure delay of reading GPIOs */
> + start_time = ktime_get();
> + for (i = 0; i < GPIO_LA_NUM_TESTS; i++) {
> + ret = gpio_la_get_array(priv->descs, &state);
> + if (ret)
> + goto out;
> + }
> +
> + priv->acq_delay = ktime_sub(ktime_get(), start_time) / GPIO_LA_NUM_TESTS;
> + if (priv->delay_ns < priv->acq_delay) {
> + ret = -ERANGE;
> + goto out;
> + }
> +
> + delay = priv->delay_ns - priv->acq_delay;
> +
> + /* Wait for triggers */
> + for (i = 0; i < priv->trig_len; i += 2) {
> + do {
> + ret = gpio_la_get_array(priv->descs, &state);
> + if (ret)
> + goto out;
> +
> + ndelay(delay);
> + } while ((state & priv->trig_data[i]) != priv->trig_data[i + 1]);
> + }
> +
> + /* With triggers, final state is also the first sample */
> + if (priv->trig_len)
> + la_buf[priv->buf_idx++] = state;
> +
> + /* Sample */
> + while (priv->buf_idx < priv->blob.size) {
> + ret = gpio_la_get_array(priv->descs, &state);
> + if (ret)
> + goto out;
> +
> + la_buf[priv->buf_idx++] = state;
> + ndelay(delay);
> + }
> +out:
> + preempt_enable_notrace();
> + local_irq_enable();
> + if (ret)
> + dev_err(priv->dev, "couldn't read GPIOs: %d\n", ret);
> +
> + kfree(priv->trig_data);
> + priv->trig_data = NULL;
> + priv->trig_len = 0;
> +
> + priv->blob_dent = debugfs_create_blob("sample_data", 0400, priv->debug_dir, &priv->blob);
> + mutex_unlock(&priv->lock);
> +
> + return ret;
> +}
> +DEFINE_DEBUGFS_ATTRIBUTE(fops_capture, NULL, fops_capture_set, "%llu\n");
> +
> +static int fops_buf_size_get(void *data, u64 *val)
> +{
> + struct gpio_la_poll_priv *priv = data;
> +
> + *val = priv->blob.size;
> +
> + return 0;
> +}
> +
> +static int fops_buf_size_set(void *data, u64 val)
> +{
> + struct gpio_la_poll_priv *priv = data;
> + int ret = 0;
> + void *p;
> +
> + if (!val)
> + return -EINVAL;
> +
> + mutex_lock(&priv->lock);
> +
> + vfree(priv->blob.data);
> + p = vzalloc(val);
> + if (!p) {
> + val = 0;
> + ret = -ENOMEM;
> + }
> +
> + priv->blob.data = p;
> + priv->blob.size = val;
> +
> + mutex_unlock(&priv->lock);
> + return ret;
> +}
> +DEFINE_DEBUGFS_ATTRIBUTE(fops_buf_size, fops_buf_size_get, fops_buf_size_set, "%llu\n");
> +
> +static int trigger_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, NULL, inode->i_private);
> +}
> +
> +static ssize_t trigger_write(struct file *file, const char __user *ubuf,
> + size_t count, loff_t *offset)
> +{
> + struct seq_file *m = file->private_data;
> + struct gpio_la_poll_priv *priv = m->private;
> + char *buf;
> +
> + /* upper limit is arbitrary but should be less than PAGE_SIZE */
> + if (count > 2048 || count & 1)
> + return -EINVAL;
> +
> + buf = memdup_user(ubuf, count);
> + if (IS_ERR(buf))
> + return PTR_ERR(buf);
> +
> + priv->trig_data = buf;
> + priv->trig_len = count;
> +
> + return count;
> +}
> +
> +static const struct file_operations fops_trigger = {
> + .owner = THIS_MODULE,
> + .open = trigger_open,
> + .write = trigger_write,
> + .llseek = no_llseek,
> + .release = single_release,
> +};
> +
> +static int gpio_la_poll_probe(struct platform_device *pdev)
> +{
> + struct gpio_la_poll_priv *priv;
> + struct device *dev = &pdev->dev;
> + const char *devname = dev_name(dev);
> + const char *gpio_names[GPIO_LA_MAX_PROBES];
> + char *meta = NULL;
> + unsigned int i, meta_len = 0;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + mutex_init(&priv->lock);
> +
> + fops_buf_size_set(priv, GPIO_LA_DEFAULT_BUF_SIZE);
> +
> + priv->descs = devm_gpiod_get_array(dev, "probe", GPIOD_IN);
> + if (IS_ERR(priv->descs))
> + return PTR_ERR(priv->descs);
> +
> + /* artificial limit to keep 1 byte per sample for now */
> + if (priv->descs->ndescs > GPIO_LA_MAX_PROBES)
> + return -EFBIG;
> +
> + ret = device_property_read_string_array(dev, "probe-names", gpio_names,
> + priv->descs->ndescs);
> + if (ret >= 0 && ret != priv->descs->ndescs)
> + ret = -EBADR;
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "error naming the GPIOs");
> +
> + for (i = 0; i < priv->descs->ndescs; i++) {
> + unsigned int add_len;
> + char *new_meta, *consumer_name;
> +
> + if (gpiod_cansleep(priv->descs->desc[i]))
> + return -EREMOTE;
> +
> + consumer_name = kasprintf(GFP_KERNEL, "%s: %s", devname, gpio_names[i]);
> + if (!consumer_name)
> + return -ENOMEM;
> + gpiod_set_consumer_name(priv->descs->desc[i], consumer_name);
> + kfree(consumer_name);
> +
> + /* '10' is length of 'probe00=\n\0' */
> + add_len = strlen(gpio_names[i]) + 10;
> +
> + new_meta = devm_krealloc(dev, meta, meta_len + add_len, GFP_KERNEL);
> + if (!new_meta)
> + return -ENOMEM;
> +
> + meta = new_meta;
> + meta_len += snprintf(meta + meta_len, add_len, "probe%02u=%s\n",
> + i + 1, gpio_names[i]);
> + }
> +
> + platform_set_drvdata(pdev, priv);
> + priv->dev = dev;
> +
> + priv->meta.data = meta;
> + priv->meta.size = meta_len;
> + priv->debug_dir = debugfs_create_dir(devname, gpio_la_poll_debug_dir);
> + debugfs_create_blob("meta_data", 0400, priv->debug_dir, &priv->meta);
> + debugfs_create_ulong("delay_ns", 0600, priv->debug_dir, &priv->delay_ns);
> + debugfs_create_ulong("delay_ns_acquisition", 0400, priv->debug_dir, &priv->acq_delay);
> + debugfs_create_file_unsafe("buf_size", 0600, priv->debug_dir, priv, &fops_buf_size);
> + debugfs_create_file_unsafe("capture", 0200, priv->debug_dir, priv, &fops_capture);
> + debugfs_create_file_unsafe("trigger", 0200, priv->debug_dir, priv, &fops_trigger);
> +
> + dev_info(dev, "initialized");
> + return 0;
> +}
> +
> +static int gpio_la_poll_remove(struct platform_device *pdev)
> +{
> + struct gpio_la_poll_priv *priv = platform_get_drvdata(pdev);
> +
> + mutex_lock(&priv->lock);
> + debugfs_remove_recursive(priv->debug_dir);
> + mutex_unlock(&priv->lock);
> + mutex_destroy(&priv->lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id gpio_la_poll_of_match[] = {
> + { .compatible = GPIO_LA_NAME, },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, gpio_la_poll_of_match);
> +
> +static struct platform_driver gpio_la_poll_device_driver = {
> + .probe = gpio_la_poll_probe,
> + .remove = gpio_la_poll_remove,
> + .driver = {
> + .name = GPIO_LA_NAME,
> + .of_match_table = gpio_la_poll_of_match,
> + }
> +};
> +
> +static int __init gpio_la_poll_init(void)
> +{
> + gpio_la_poll_debug_dir = debugfs_create_dir(GPIO_LA_NAME, NULL);
> +
> + return platform_driver_register(&gpio_la_poll_device_driver);
> +}
> +late_initcall(gpio_la_poll_init);
> +
> +static void __exit gpio_la_poll_exit(void)
> +{
> + platform_driver_unregister(&gpio_la_poll_device_driver);
> + debugfs_remove_recursive(gpio_la_poll_debug_dir);
> +}
> +module_exit(gpio_la_poll_exit);
> +
> +MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
> +MODULE_DESCRIPTION("Sloppy logic analyzer using GPIOs");
> +MODULE_LICENSE("GPL v2");
> diff --git a/tools/gpio/gpio-sloppy-logic-analyzer b/tools/gpio/gpio-sloppy-logic-analyzer
> new file mode 100755
> index 000000000000..09065535e874
> --- /dev/null
> +++ b/tools/gpio/gpio-sloppy-logic-analyzer
> @@ -0,0 +1,230 @@
> +#!/bin/sh -eu
> +# Helper script for the Linux Kernel GPIO sloppy logic analyzer
> +#
> +# Copyright (C) Wolfram Sang <wsa@sang-engineering.com>
> +# Copyright (C) Renesas Electronics Corporation
> +#
> +# TODO: support SI units in command line parameters?
> +
> +samplefreq=1000000
> +numsamples=250000
> +cpusetdefaultdir='/sys/fs/cgroup'
> +cpusetprefix='cpuset.'
> +debugdir='/sys/kernel/debug'
> +ladirname='gpio-sloppy-logic-analyzer'
> +outputdir="$PWD"
> +neededcmds='taskset zip'
> +max_chans=8
> +duration=
> +initcpu=
> +lainstance=
> +lasysfsdir=
> +triggerdat=
> +trigger_bindat=
> +progname="${0##*/}"
> +print_help()
> +{
> + cat << EOF
> +$progname - helper script for the Linux Kernel Sloppy GPIO Logic Analyzer
> +Available options:
> + -c|--cpu <n>: which CPU to isolate for sampling. Only needed once. Default <1>.
> + Remember that a more powerful CPU gives you higher sampling speeds.
> + Also CPU0 is not recommended as it usually does extra bookkeeping.
> + -d|--duration-us <n>: number of microseconds to sample. Overrides -n, no default value.
> + -h|--help: print this help
> + -i|--instance <str>: name of the logic analyzer in case you have multiple instances. Default
> + to first instance found
> + -k|--kernel-debug-dir: path to the kernel debugfs mountpoint. Default: <$debugdir>
> + -n|--num_samples <n>: number of samples to acquire. Default <$numsamples>
> + -o|--output-dir <str>: directory to put the result files. Default: current dir
> + -s|--sample_freq <n>: desired sampling frequency. Might be capped if too large. Default: 1MHz.
> + -t|--trigger <str>: pattern to use as trigger. <str> consists of two-char pairs. First
> + char is channel number starting at "1". Second char is trigger level:
> + "L" - low; "H" - high; "R" - rising; "F" - falling
> + These pairs can be combined with "+", so "1H+2F" triggers when probe 1
> + is high while probe 2 has a falling edge. You can have multiple triggers
> + combined with ",". So, "1H+2F,1H+2R" is like the example before but it
> + waits for a rising edge on probe 2 while probe 1 is still high after the
> + first trigger has been met.
> + Trigger data will only be used for the next capture and then be erased.
> +Examples:
> +Samples $numsamples values at 1MHz with an already prepared CPU or automatically prepares CPU1 if needed,
> +use the first logic analyzer instance found:
> + '$progname'
> +Samples 50us at 2MHz waiting for a falling edge on channel 2. CPU and instance as above:
> + '$progname -d 50 -s 2000000 -t "2F"'
> +
> +Note that the process exits after checking all parameters but a sub-process still works in
> +the background. The result is only available once the sub-process finishes.
> +
> +Result is a .sr file to be consumed with PulseView from the free Sigrok project. It is
> +a zip file which also contains the binary sample data which may be consumed by others.
> +The filename is the logic analyzer instance name plus a since-epoch timestamp.
> +EOF
> +}
> +
> +fail()
> +{
> + echo "$1"
> + exit 1
> +}
> +
> +set_newmask()
> +{
> + for f in $(find "$1" -iname "$2"); do echo "$newmask" > "$f" 2>/dev/null || true; done
> +}
> +
> +init_cpu()
> +{
> + isol_cpu="$1"
> +
> + [ -d "$lacpusetdir" ] || mkdir "$lacpusetdir"
> +
> + cur_cpu=$(cat "${lacpusetfile}cpus")
> + [ "$cur_cpu" = "$isol_cpu" ] && return
> + [ -z "$cur_cpu" ] || fail "CPU$isol_cpu requested but CPU$cur_cpu already isolated"
> +
> + echo "$isol_cpu" > "${lacpusetfile}cpus" || fail "Could not isolate CPU$isol_cpu. Does it exist?"
> + echo 1 > "${lacpusetfile}cpu_exclusive"
> + echo 0 > "${lacpusetfile}mems"
> +
> + oldmask=$(cat /proc/irq/default_smp_affinity)
> + newmask=$(printf "%x" $((0x$oldmask & ~(1 << isol_cpu))))
> +
> + set_newmask '/proc/irq' '*smp_affinity'
> + set_newmask '/sys/devices/virtual/workqueue/' 'cpumask'
> +
> + # Move tasks away from isolated CPU
> + for p in $(ps -o pid | tail -n +2); do
> + mask=$(taskset -p "$p") || continue
> + # Ignore tasks with a custom mask, i.e. not equal $oldmask
> + [ "${mask##*: }" = "$oldmask" ] || continue
> + taskset -p "$newmask" "$p" || continue
> + done 2>/dev/null >/dev/null
> +
> + echo 1 > /sys/module/rcupdate/parameters/rcu_cpu_stall_suppress
> +
> + cpufreqgov="/sys/devices/system/cpu/cpu$isol_cpu/cpufreq/scaling_governor"
> + [ -w "$cpufreqgov" ] && echo 'performance' > "$cpufreqgov" || true
> +}
> +
> +parse_triggerdat()
> +{
> + oldifs="$IFS"
> + IFS=','; for trig in $1; do
> + mask=0; val1=0; val2=0
> + IFS='+'; for elem in $trig; do
> + chan=${elem%[lhfrLHFR]}
> + mode=${elem#$chan}
> + # Check if we could parse something and the channel number fits
> + [ "$chan" != "$elem" ] && [ "$chan" -le $max_chans ] || fail "Trigger syntax error: $elem"
> + bit=$((1 << (chan - 1)))
> + mask=$((mask | bit))
> + case $mode in
> + [hH]) val1=$((val1 | bit)); val2=$((val2 | bit));;
> + [fF]) val1=$((val1 | bit));;
> + [rR]) val2=$((val2 | bit));;
> + esac
> + done
> + trigger_bindat="$trigger_bindat$(printf '\\%o\\%o' $mask $val1)"
> + [ $val1 -ne $val2 ] && trigger_bindat="$trigger_bindat$(printf '\\%o\\%o' $mask $val2)"
> + done
> + IFS="$oldifs"
> +}
> +
> +do_capture()
> +{
> + taskset "$1" echo 1 > "$lasysfsdir"/capture || fail "Capture error! Check kernel log"
> +
> + srtmp=$(mktemp -d)
> + echo 1 > "$srtmp"/version
> + cp "$lasysfsdir"/sample_data "$srtmp"/logic-1-1
> + cat > "$srtmp"/metadata << EOF
> +[global]
> +sigrok version=0.2.0
> +
> +[device 1]
> +capturefile=logic-1
> +total probes=$(wc -l < "$lasysfsdir"/meta_data)
> +samplerate=${samplefreq}Hz
> +unitsize=1
> +EOF
> + cat "$lasysfsdir"/meta_data >> "$srtmp"/metadata
> +
> + zipname="$outputdir/${lasysfsdir##*/}-$(date +%s).sr"
> + zip -jq "$zipname" "$srtmp"/*
> + rm -rf "$srtmp"
> + delay_ack=$(cat "$lasysfsdir"/delay_ns_acquisition)
> + [ "$delay_ack" -eq 0 ] && delay_ack=1
> + echo "Logic analyzer done. Saved '$zipname'"
> + echo "Max sample frequency this time: $((1000000000 / delay_ack))Hz."
> +}
> +
> +rep=$(getopt -a -l cpu:,duration-us:,help,instance:,kernel-debug-dir:,num_samples:,output-dir:,sample_freq:,trigger: -o c:d:hi:k:n:o:s:t: -- "$@") || exit 1
> +eval set -- "$rep"
> +while true; do
> + case "$1" in
> + -c|--cpu) initcpu="$2"; shift;;
> + -d|--duration-us) duration="$2"; shift;;
> + -h|--help) print_help; exit 0;;
> + -i|--instance) lainstance="$2"; shift;;
> + -k|--kernel-debug-dir) debugdir="$2"; shift;;
> + -n|--num_samples) numsamples="$2"; shift;;
> + -o|--output-dir) outputdir="$2"; shift;;
> + -s|--sample_freq) samplefreq="$2"; shift;;
> + -t|--trigger) triggerdat="$2"; shift;;
> + --) break;;
> + *) fail "error parsing command line: $*";;
> + esac
> + shift
> +done
> +
> +for f in $neededcmds; do
> + command -v "$f" >/dev/null || fail "Command '$f' not found"
> +done
> +
> +# print cpuset mountpoint if any, errorcode > 0 if noprefix option was found
> +cpusetdir=$(awk '$3 == "cgroup" && $4 ~ /cpuset/ { print $2; exit (match($4, /noprefix/) > 0) }' /proc/self/mounts) || cpusetprefix=''
> +if [ -z "$cpusetdir" ]; then
> + cpusetdir="$cpusetdefaultdir"
> + [ -d $cpusetdir ] || mkdir $cpusetdir
> + mount -t cgroup -o cpuset none $cpusetdir || fail "Couldn't mount cpusets. Not in kernel or already in use?"
> +fi
> +
> +lacpusetdir="$cpusetdir/$ladirname"
> +lacpusetfile="$lacpusetdir/$cpusetprefix"
> +sysfsdir="$debugdir/$ladirname"
> +
> +[ "$samplefreq" -ne 0 ] || fail "Invalid sample frequency"
> +
> +[ -d "$sysfsdir" ] || fail "Could not find logic analyzer root dir '$sysfsdir'. Module loaded?"
> +[ -x "$sysfsdir" ] || fail "Could not access logic analyzer root dir '$sysfsdir'. Need root?"
> +
> +if [ -n "$lainstance" ]; then
> + lasysfsdir="$sysfsdir/$lainstance"
> +else
> + lasysfsdir=$(find "$sysfsdir" -mindepth 1 -type d -print -quit)
> +fi
> +[ -d "$lasysfsdir" ] || fail "Logic analyzer directory '$lasysfsdir' not found!"
> +[ -d "$outputdir" ] || fail "Output directory '$outputdir' not found!"
> +
> +[ -n "$initcpu" ] && init_cpu "$initcpu"
> +[ -d "$lacpusetdir" ] || { echo "Auto-Isolating CPU1"; init_cpu 1; }
> +
> +ndelay=$((1000000000 / samplefreq))
> +echo "$ndelay" > "$lasysfsdir"/delay_ns
> +
> +[ -n "$duration" ] && numsamples=$((samplefreq * duration / 1000000))
> +echo $numsamples > "$lasysfsdir"/buf_size
> +
> +if [ -n "$triggerdat" ]; then
> + parse_triggerdat "$triggerdat"
> + printf "$trigger_bindat" > "$lasysfsdir"/trigger 2>/dev/null || fail "Trigger data '$triggerdat' rejected"
> +fi
> +
> +workcpu=$(cat "${lacpusetfile}effective_cpus")
> +[ -n "$workcpu" ] || fail "No isolated CPU found"
> +cpumask=$(printf '%x' $((1 << workcpu)))
> +instance=${lasysfsdir##*/}
> +echo "Setting up '$instance': $numsamples samples at ${samplefreq}Hz with ${triggerdat:-no} trigger using CPU$workcpu"
> +do_capture "$cpumask" &
> --
> 2.30.2
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2022-03-30 16:53    [W:0.457 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site