lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    SubjectRe: [PATCH v2 3/7] ARM: dts: lan966x: add missing uart DMA channel
    Date
    On 04.03.2022 17:35, Michael Walle wrote:
    > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
    >
    > The usart node of the flexcom3 block is missing the DMA channels. Add
    > it.
    >
    > Signed-off-by: Michael Walle <michael@walle.cc>

    Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


    > ---
    > arch/arm/boot/dts/lan966x.dtsi | 3 +++
    > 1 file changed, 3 insertions(+)
    >
    > diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
    > index 39dfdb8e29ed..230de3bdd5f1 100644
    > --- a/arch/arm/boot/dts/lan966x.dtsi
    > +++ b/arch/arm/boot/dts/lan966x.dtsi
    > @@ -144,6 +144,9 @@ usart3: serial@200 {
    > compatible = "atmel,at91sam9260-usart";
    > reg = <0x200 0x200>;
    > interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
    > + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
    > + <&dma0 AT91_XDMAC_DT_PERID(8)>;
    > + dma-names = "tx", "rx";
    > clocks = <&nic_clk>;
    > clock-names = "usart";
    > atmel,fifo-size = <32>;
    > --
    > 2.30.2
    >

    \
     
     \ /
      Last update: 2022-03-30 15:26    [W:4.328 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site