Messages in this thread | | | Date | Wed, 30 Mar 2022 10:09:58 +0200 | From | Miquel Raynal <> | Subject | Re: [PATCH] mtd: parsers: add support for Sercomm partitions |
| |
Hi Mikhail,
csharper2005@gmail.com wrote on Tue, 29 Mar 2022 12:20:16 +0000:
> This adds an MTD partition parser for the Sercomm partition table that > is used in some Beeline, Netgear and Sercomm routers. > > The Sercomm partition map table contains real partition offsets, which > may differ from device to device depending on the number and location of > bad blocks on NAND. > > Device tree example: > partitions { > compatible = "sercomm,sc-partitions", "fixed-partitions"; > #address-cells = <1>; > #size-cells = <1>; > > partition@0 { > label = "u-boot"; > reg = <0x0 0x100000>; > scpart-id = <0>; > read-only; > }; > };
You'll need a DT binding patch and Rob's ack!
> > This is essentially the same code as proposed by NOGUCHI Hiroshi > <drvlabo@gmail.com> here:
I would credit Hiroshi with a Suggested-by at least
> https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
And use a Link: tag for this.
> > Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> > ---
Thanks, Miquèl
| |