lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom wled backlight and link to panel
From
Hi Marijn,

On 30/03/22 12:47, Marijn Suijten wrote:
> On 2022-03-30 12:26:39, Joel Selvaraj wrote:
>> Xiaomi Poco F1 uses the QCOM WLED driver for backlight control.
>> Enable and link it to the panel to use it.
>>
>> Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
>> ---
>> .../arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
>> index 798fc72578a7..3ebb0f9905d3 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
>> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
>> @@ -231,6 +231,7 @@ panel@0 {
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>> + backlight = <&pmi8998_wled>;
>> reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
>>
>> port {
>> @@ -314,6 +315,18 @@ vol_up_pin_a: vol-up-active {
>> };
>> };
>>
>> +&pmi8998_wled {
>> + status = "okay";
>> + qcom,current-boost-limit = <970>;
>> + qcom,ovp-millivolt = <29600>;
>> + qcom,current-limit-microamp = <20000>;
>> + qcom,enabled-strings = <0 1>;
>> + qcom,num-strings = <2>;
>
> No need to set both nowadays, the driver will even print a warning in
> this case:
>
>
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flinux-arm-msm%2F20211115203459.1634079-6-marijn.suijten%40somainline.org%2F&amp;data=04%7C01%7C%7C2104b54ac0f54308dd1208da121d706a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637842214894184949%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=GYmzHoy6tTAE7ZNTqclfCZH5Fnu%2Bh5d5JHOwsm4wVro%3D&amp;reserved=0
>
> Sticking with qcom,num-strings is probably the right choice here.

Ok. Thanks. Will fix it in the next version.

Regards
Joel

>
> - Marijn
>
>> + qcom,switching-freq = <600>;
>> + qcom,external-pfet;
>> + qcom,cabc;
>> +};
>> +
>> &pm8998_pon {
>> resin {
>> compatible = "qcom,pm8941-resin";
>> --
>> 2.35.1
>>
> .
>

\
 
 \ /
  Last update: 2022-03-30 09:48    [W:0.050 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site