lkml.org 
[lkml]   [2022]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 00/14] Move HEVC stateless controls out of staging
From

Le 03/03/2022 à 02:23, Adam Ford a écrit :
> On Mon, Feb 28, 2022 at 4:13 AM Benjamin Gaignard
> <benjamin.gaignard@collabora.com> wrote:
>>
>> Le 26/02/2022 à 23:25, Adam Ford a écrit :
>>> On Fri, Feb 25, 2022 at 4:41 PM Benjamin Gaignard
>>> <benjamin.gaignard@collabora.com> wrote:
>>>> This series aims to make HEVC uapi stable and usable for hardware
>>>> decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
>>>> and 2 out of the tree drivers (rkvdec and RPI).
>>>>
>>>> After the remarks done on version 2, I have completely reworked to patches
>>>> split so changelogs are meaningless. I have also drop "RFC" from the
>>>> titles.
>>>>
>>>> In this v3 I do all the changes (new controls, documentation, etc..)
>>>> in the staging directory before moving the HEVC uAPI to stable
>>>> steps by steps (unlike the big one patch in v2).
>>>>
>>>> At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
>> I have push a branch here:
>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/HEVC_UAPI_V4
>>
>> it is the incoming version 4 of this series + patches to enable G2 on my IMX8MQ
> Benjamin,
>
> I checked this repo out, and built it along with pulling the latest
> versions of G-streamer and fluster.
> When I check for v4l2 compatibility, I get the following:
>
> GStreamer-H.264-V4L2-Gst1.0: GStreamer H.264 V4L2 decoder for
> GStreamer 1.0... ❌
> GStreamer-H.264-V4L2SL-Gst1.0: GStreamer H.264 V4L2SL decoder for
> GStreamer 1.0... ✔️
> GStreamer-AV1-V4L2SL-Gst1.0: GStreamer AV1 V4L2SL decoder for
> GStreamer 1.0... ❌
> GStreamer-H.265-V4L2-Gst1.0: GStreamer H.265 V4L2 decoder for
> GStreamer 1.0... ❌
> GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for
> GStreamer 1.0... ❌
> GStreamer-VP8-V4L2-Gst1.0: GStreamer VP8 V4L2 decoder for GStreamer 1.0... ❌
> GStreamer-VP8-V4L2SL-Gst1.0: GStreamer VP8 V4L2SL decoder for
> GStreamer 1.0... ✔️
> GStreamer-VP9-V4L2SL-Gst1.0: GStreamer VP9 V4L2SL decoder for
> GStreamer 1.0... ✔️
>
> I see H,264, VP8 and VP9, but I would have also expected
> GStreamer-H.265-V4L2SL-Gst1.0 to return with a check box.
>
> When I checked to see if both decoders were being enumerated, I found they were.
> [gst-main] root@localhost:~/gstreamer/fluster# dmesg |grep -i hantro
> [ 16.044243] hantro_vpu: module is from the staging directory, the
> quality is unknown, you have been warned.
> [ 16.044243] hantro_vpu: module is from the staging directory, the
> quality is unknown, you have been warned.
> [ 16.095661] hantro-vpu 38300000.video-codec: registered
> nxp,imx8mq-vpu-g1-dec as /dev/video0
> [ 16.096782] hantro-vpu 38310000.video-codec: registered
> nxp,imx8mq-vpu-g2-dec as /dev/video1
>
> Did I do something wrong, or did I miss something?

Hi Adam,

I guess it could be a misalignment between v4l2 kernel headers
and GStreamer v4l2 headers.
I have push a new version of the GST merge request which is aligned with
HEVC uAPI v4 proposal.

When you inspect v4l2codecs gst plugin (gst-inspect-1.0 v4l2codecs) do
you see v4l2slh265dec plugin ?
I have fluster happy with it:
./fluster.py list -c


H265
...
GStreamer-H.265-V4L2-Gst1.0: GStreamer H.265 V4L2 decoder for GStreamer 1.0... ❌
GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for GStreamer 1.0... ✔️
GStreamer-H.265-VA-Gst1.0: GStreamer H.265 VA decoder for GStreamer 1.0... ❌
GStreamer-H.265-VAAPI-Gst1.0: GStreamer H.265 VAAPI decoder for GStreamer 1.0... ❌
JCT-VT-H.265: JCT-VT H.265/HEVC reference decoder... ❌

I hope that will help you,

Regards,
Benjamin

>
> adam
>
>> Regards,
>> Benjamin
>>
>>> Benjamin,
>>>
>>> I have an imx8mm and imx8mq that I can test. Do you happen to have a
>>> repo that I can clone to test this? The imx8m stuff is spread around
>>> between the media tree and the imx tree since it hasn't been fully
>>> merged yet.
>>>
>>> thanks,
>>>
>>> adam
>>>
>>>> Benjamin
>>>>
>>>> Benjamin Gaignard (11):
>>>> media: uapi: HEVC: Add missing fields in HEVC controls
>>>> media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
>>>> prefix
>>>> media: uapi: HEVC: Add document uAPI structure
>>>> media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
>>>> dynamic array
>>>> media: uapi: Move parsed HEVC pixel format out of staging
>>>> media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSET control
>>>> media: uapi: Move the HEVC stateless control type out of staging
>>>> media: controls: Log HEVC stateless control in .std_log
>>>> media: uapi: Create a dedicated header for Hantro control
>>>> media: uapi: HEVC: fix padding in v4l2 control structures
>>>> media: uapi: move HEVC stateless controls out of staging
>>>>
>>>> Hans Verkuil (3):
>>>> videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
>>>> v4l2-ctrls: add support for dynamically allocated arrays.
>>>> vivid: add dynamic array test control
>>>>
>>>> .../userspace-api/media/drivers/hantro.rst | 5 -
>>>> .../media/v4l/ext-ctrls-codec-stateless.rst | 831 ++++++++++++++++++
>>>> .../media/v4l/ext-ctrls-codec.rst | 780 ----------------
>>>> .../media/v4l/pixfmt-compressed.rst | 7 +-
>>>> .../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
>>>> .../media/v4l/vidioc-queryctrl.rst | 8 +
>>>> .../media/videodev2.h.rst.exceptions | 5 +
>>>> .../media/test-drivers/vivid/vivid-ctrls.c | 15 +
>>>> drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 ++-
>>>> drivers/media/v4l2-core/v4l2-ctrls-core.c | 198 ++++-
>>>> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 32 +-
>>>> drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
>>>> drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
>>>> drivers/staging/media/hantro/hantro_drv.c | 27 +-
>>>> drivers/staging/media/hantro/hantro_hevc.c | 8 +-
>>>> drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +-
>>>> .../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
>>>> include/media/hevc-ctrls.h | 250 ------
>>>> include/media/v4l2-ctrls.h | 48 +-
>>>> include/uapi/linux/hantro-media.h | 19 +
>>>> include/uapi/linux/v4l2-controls.h | 436 +++++++++
>>>> include/uapi/linux/videodev2.h | 13 +
>>>> 22 files changed, 1686 insertions(+), 1169 deletions(-)
>>>> delete mode 100644 include/media/hevc-ctrls.h
>>>> create mode 100644 include/uapi/linux/hantro-media.h
>>>>
>>>> --
>>>> 2.32.0
>>>>

\
 
 \ /
  Last update: 2022-03-03 11:14    [W:0.240 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site