lkml.org 
[lkml]   [2022]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch v3] mm: lru_cache_disable: replace work queue synchronization with synchronize_rcu
(Question for paulmck below, please)

On Tue, 22 Feb 2022 13:07:35 -0300 Marcelo Tosatti <mtosatti@redhat.com> wrote:

>
> On systems that run FIFO:1 applications that busy loop
> on isolated CPUs, executing tasks on such CPUs under
> lower priority is undesired (since that will either
> hang the system, or cause longer interruption to the
> FIFO task due to execution of lower priority task
> with very small sched slices).
>
> Commit d479960e44f27e0e52ba31b21740b703c538027c ("mm: disable LRU
> pagevec during the migration temporarily") relies on
> queueing work items on all online CPUs to ensure visibility
> of lru_disable_count.
>
> However, its possible to use synchronize_rcu which will provide the same
> guarantees (see comment this patch modifies on lru_cache_disable).
>
> Fixes:
>
> [ 1873.243925] INFO: task kworker/u160:0:9 blocked for more than 622 seconds.
> [ 1873.243927] Tainted: G I --------- --- 5.14.0-31.rt21.31.el9.x86_64 #1
> [ 1873.243929] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 1873.243929] task:kworker/u160:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00004000
> [ 1873.243932] Workqueue: cpuset_migrate_mm cpuset_migrate_mm_workfn
> [ 1873.243936] Call Trace:
> [ 1873.243938] __schedule+0x21b/0x5b0
> [ 1873.243941] schedule+0x43/0xe0
> [ 1873.243943] schedule_timeout+0x14d/0x190
> [ 1873.243946] ? resched_curr+0x20/0xe0
> [ 1873.243953] ? __prepare_to_swait+0x4b/0x70
> [ 1873.243958] wait_for_completion+0x84/0xe0
> [ 1873.243962] __flush_work.isra.0+0x146/0x200
> [ 1873.243966] ? flush_workqueue_prep_pwqs+0x130/0x130
> [ 1873.243971] __lru_add_drain_all+0x158/0x1f0
> [ 1873.243978] do_migrate_pages+0x3d/0x2d0
> [ 1873.243985] ? pick_next_task_fair+0x39/0x3b0
> [ 1873.243989] ? put_prev_task_fair+0x1e/0x30
> [ 1873.243992] ? pick_next_task+0xb30/0xbd0
> [ 1873.243995] ? __tick_nohz_task_switch+0x1e/0x70
> [ 1873.244000] ? raw_spin_rq_unlock+0x18/0x60
> [ 1873.244002] ? finish_task_switch.isra.0+0xc1/0x2d0
> [ 1873.244005] ? __switch_to+0x12f/0x510
> [ 1873.244013] cpuset_migrate_mm_workfn+0x22/0x40
> [ 1873.244016] process_one_work+0x1e0/0x410
> [ 1873.244019] worker_thread+0x50/0x3b0
> [ 1873.244022] ? process_one_work+0x410/0x410
> [ 1873.244024] kthread+0x173/0x190
> [ 1873.244027] ? set_kthread_struct+0x40/0x40
> [ 1873.244031] ret_from_fork+0x1f/0x30
>
> ...
>
> --- a/mm/swap.c
> +++ b/mm/swap.c
> @@ -831,8 +831,7 @@ inline void __lru_add_drain_all(bool force_all_cpus)
> for_each_online_cpu(cpu) {
> struct work_struct *work = &per_cpu(lru_add_drain_work, cpu);
>
> - if (force_all_cpus ||
> - pagevec_count(&per_cpu(lru_pvecs.lru_add, cpu)) ||
> + if (pagevec_count(&per_cpu(lru_pvecs.lru_add, cpu)) ||
> data_race(pagevec_count(&per_cpu(lru_rotate.pvec, cpu))) ||
> pagevec_count(&per_cpu(lru_pvecs.lru_deactivate_file, cpu)) ||
> pagevec_count(&per_cpu(lru_pvecs.lru_deactivate, cpu)) ||

This change appears to be "don't queue work on CPUs which don't have
any work to do". Correct? This isn't changelogged?

> @@ -876,14 +875,19 @@ atomic_t lru_disable_count = ATOMIC_INIT(0);
> void lru_cache_disable(void)
> {
> atomic_inc(&lru_disable_count);
> + synchronize_rcu();
> #ifdef CONFIG_SMP
> /*
> - * lru_add_drain_all in the force mode will schedule draining on
> - * all online CPUs so any calls of lru_cache_disabled wrapped by
> - * local_lock or preemption disabled would be ordered by that.
> - * The atomic operation doesn't need to have stronger ordering
> - * requirements because that is enforced by the scheduling
> - * guarantees.
> + * synchronize_rcu() waits for preemption disabled
> + * and RCU read side critical sections.
> + * For the users of lru_disable_count:
> + *
> + * preempt_disable, local_irq_disable [bh_lru_lock()]
> + * rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT]
> + * preempt_disable [local_lock !CONFIG_PREEMPT_RT]
> + *
> + * so any calls of lru_cache_disabled wrapped by local_lock or
> + * preemption disabled would be ordered by that.
> */
> __lru_add_drain_all(true);
> #else

Does this also work with CONFIG_TINY_RCU?

This seems abusive of synchronize_rcu(). None of this code uses RCU,
but it so happens that synchronize_rcu() happily provides the desired
effects. Changes in RCU's happy side-effects might break this.
Perhaps a formal API function which does whatever-you-want-it-to-do
would be better.

And... I really don't understand the fix. What is it about
synchronize_rcu() which guarantees that a work function which is queued
on CPU N will now get executed even if CPU N is spinning in SCHED_FIFO
userspace?

\
 
 \ /
  Last update: 2022-03-04 02:04    [W:0.266 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site