lkml.org 
[lkml]   [2022]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 11/12] ARM: dts: imx: Add i.MXRT1170-EVK support
From
On 26/03/2022 15:43, Jesse Taube wrote:
> The NXP i.MXRT1170 Evaluation Kit (EVK) provides a platform for rapid
> evaluation of the i.MXRT, which features NXP's implementation of the Arm
> Cortex-M7 and M4 core.
>
> The EVK provides 64 MB SDRAM, 128 MB Quad SPI flash, Micro SD card socket,
> two USB 2.0 OTG, and two Ethernet ports.
>
> This patch aims to support the preliminary booting up features
> as follows:
> GPIO
> LPUART
> SD/MMC
>
> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/imxrt1170-evk.dts | 126 +++++++++++++
> arch/arm/boot/dts/imxrt1170.dtsi | 278 ++++++++++++++++++++++++++++
> 3 files changed, 406 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/imxrt1170-evk.dts
> create mode 100644 arch/arm/boot/dts/imxrt1170.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 07acd6189cae..87ae30818f39 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -724,7 +724,8 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
> imx7ulp-com.dtb \
> imx7ulp-evk.dtb
> dtb-$(CONFIG_SOC_IMXRT) += \
> - imxrt1050-evk.dtb
> + imxrt1050-evk.dtb \
> + imxrt1170-evk.dtb
> dtb-$(CONFIG_SOC_LS1021A) += \
> ls1021a-moxa-uc-8410a.dtb \
> ls1021a-qds.dtb \
> diff --git a/arch/arm/boot/dts/imxrt1170-evk.dts b/arch/arm/boot/dts/imxrt1170-evk.dts
> new file mode 100644
> index 000000000000..fc3b41de8215
> --- /dev/null
> +++ b/arch/arm/boot/dts/imxrt1170-evk.dts
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2022
> + * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "imxrt1170.dtsi"
> +#include "imxrt1170-pinfunc.h"
> +
> +/ {
> + model = "NXP imxrt1170-evk board";
> + compatible = "fsl,imxrt1170-evk", "fsl,imxrt1170";
> +
> + chosen {
> + stdout-path = &lpuart1;
> + };
> +
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + gpio3 = &gpio4;
> + gpio4 = &gpio5;
> + gpio5 = &gpio6;
> + gpio6 = &gpio7;
> + gpio7 = &gpio8;
> + gpio8 = &gpio9;
> + gpio9 = &gpio10;
> + gpio10 = &gpio11;
> + gpio11 = &gpio12;
> + gpio12 = &gpio13;
> + mmc0 = &usdhc1;
> + serial0 = &lpuart1;
> + usbphy0 = &usbphy1;
> + };
> +
> + memory@20240000 {
> + device_type = "memory";
> + reg = <0x20240000 0xf0000>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x4000000>;
> + };
> +
> + reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0>;
> + regulator-name = "usb_otg1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio9 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&lpuart1 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpuart1>;
> + status = "okay";
> +};
> +
> +
> +&usbotg1 {
> + vbus-supply = <&reg_usb_otg1_vbus>;
> + dr_mode = "host";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1_id>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_lpuart1: lpuart1grp {
> + fsl,pins = <
> + IOMUXC_GPIO_AD_24_LPUART1_TXD 0xf1
> + IOMUXC_GPIO_AD_25_LPUART1_RXD 0xf1
> + >;
> + };
> +
> + pinctrl_pwm0: pwm0grp {
> + fsl,pins = <
> + IOMUXC_GPIO_AD_11_USB_OTG1_OC 0xf1
> + >;
> + };
> +
> + pinctrl_usbotg1_id: pinctrl_usbotg1_id {

No underscores in node names. Does not match the DT schema, please test
your DTS (make dtbs_check).

> + fsl,pins = <
> + IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID 0xf1
> + >;
> + };
> +
> + pinctrl_usdhc0: usdhc0grp {
> + fsl,pins = <
> + IOMUXC_GPIO_AD_32_USDHC1_CD_B
> + 0x1B000
> + IOMUXC_GPIO_AD_34_USDHC1_VSELECT
> + 0xB069
> + IOMUXC_GPIO_SD_B1_00_USDHC1_CMD
> + 0x17061
> + IOMUXC_GPIO_SD_B1_01_USDHC1_CLK
> + 0x17061
> + IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3
> + 0x17061
> + IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2
> + 0x17061
> + IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1
> + 0x17061
> + IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0
> + 0x17061
> + >;
> + };
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc0>;
> + pinctrl-1 = <&pinctrl_usdhc0>;
> + pinctrl-2 = <&pinctrl_usdhc0>;
> + pinctrl-3 = <&pinctrl_usdhc0>;
> + status = "okay";
> + broken-cd;
> +};
> diff --git a/arch/arm/boot/dts/imxrt1170.dtsi b/arch/arm/boot/dts/imxrt1170.dtsi
> new file mode 100644
> index 000000000000..fb53347571a9
> --- /dev/null
> +++ b/arch/arm/boot/dts/imxrt1170.dtsi
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2022
> + * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
> + */
> +
> +#include "armv7-m.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/imxrt1170-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + size = <0x40000>;
> + no-map;
> + linux,dma-default;
> + };
> + };
> +
> + clocks {
> + osc: osc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> +
> + rcosc16M: rcosc16M {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <16000000>;
> + };
> +
> + osc32k: osc32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> +
> + osc3M: osc3M {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <3000000>;
> + };
> + };
> +
> + soc {
> + anatop: anatop@40c84000 {
> + compatible = "fsl,imxrt-anatop";
> + reg = <0x40c84000 0x4000>;
> + };
> +
> + clks: ccm@40cc0000 {

Generic node names. Isn't it clock-controller?

> + compatible = "fsl,imxrt1170-ccm";
> + reg = <0x40cc0000 0x4000>;
> + clocks = <&osc>, <&rcosc16M>, <&osc32k>;
> + clock-names = "osc", "rcosc16M", "osc32k";
> + #clock-cells = <1>;
> + };
> +
> + edma1: dma-controller@40070000 {
> + #dma-cells = <2>;
> + compatible = "fsl,imx7ulp-edma";
> + reg = <0x40070000 0x4000>,
> + <0x40074000 0x4000>;
> + dma-channels = <32>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
> + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
> + clock-names = "dma", "dmamux0";
> + clocks = <&clks IMXRT1170_CLK_BUS>,
> + <&clks IMXRT1170_CLK_M4>;
> + };
> +
> + gpio1: gpio@4012c000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x4012c000 0x4000>;
> + interrupts = <100>, <101>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio@40130000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40130000 0x4000>;
> + interrupts = <102>, <103>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio@40134000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40134000 0x4000>;
> + interrupts = <104>, <105>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio4: gpio@40138000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40138000 0x4000>;
> + interrupts = <106>, <107>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio5: gpio@4013c000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x4013c000 0x4000>;
> + interrupts = <108>, <109>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio6: gpio@40140000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40140000 0x4000>;
> + interrupts = <61>, <62>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio7: gpio@40c5c000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40c5c000 0x4000>;
> + interrupts = <99>, <99>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio8: gpio@40c60000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40c60000 0x4000>;
> + interrupts = <99>, <99>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio9: gpio@40c64000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40c64000 0x4000>;
> + interrupts = <99>, <99>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio10: gpio@40c68000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";

Undocumented compatible.

> + reg = <0x40c68000 0x4000>;
> + interrupts = <99>, <99>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio11: gpio@40c6c000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40c6c000 0x4000>;
> + interrupts = <99>, <99>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio12: gpio@40c70000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40c70000 0x4000>;
> + interrupts = <61>, <62>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio13: gpio@40ca0000 {
> + compatible = "fsl,imxrt1170-gpio", "fsl,imx35-gpio";
> + reg = <0x40ca0000 0x4000>;
> + interrupts = <93>, <93>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpt: timer@400ec000 {
> + compatible = "fsl,imxrt1170-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";

Wrong compatibles.

> + reg = <0x400ec000 0x4000>;
> + interrupts = <119>;
> + clocks = <&osc3M>;
> + clock-names = "per";
> + };
> +
> + iomuxc: iomuxc@400e8000 {
> + compatible = "fsl,imxrt1170-iomuxc";
> + reg = <0x400e8000 0x4000>;
> + fsl,mux_mask = <0x7>;
> + };
> +
> + lpuart1: serial@4007c000 {
> + compatible = "fsl,imxrt1170-lpuart", "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";

Undocumented compatible.

> + reg = <0x4007c000 0x4000>;
> + interrupts = <20>;
> + clocks = <&clks IMXRT1170_CLK_LPUART1>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + usdhc1: mmc@40418000 {
> + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";

Wrong compatibles.

> + reg = <0x40418000 0x10000>;
> + interrupts = <133>;
> + clocks = <&clks IMXRT1170_CLK_BUS>,
> + <&clks IMXRT1170_CLK_BUS>,
> + <&clks IMXRT1170_CLK_USDHC1>;
> + clock-names = "ipg", "ahb", "per";
> + bus-width = <4>;
> + fsl,wp-controller;
> + no-1-8-v;
> + max-frequency = <4000000>;
> + fsl,tuning-start-tap = <20>;
> + fsl,tuning-step= <2>;
> + status = "disabled";
> + };
> +> +

One line break.

> + usbmisc1: usbmisc@40430200 {
> + compatible = "fsl,imx7ulp-usbmisc";
> + #index-cells = <1>;
> + reg = <0x40430200 0x200>;
> + };
> +



Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-03-27 21:17    [W:0.125 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site