lkml.org 
[lkml]   [2022]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/4] arm64: dts: mediatek: Add device-tree for MT8195 Demo board
From
On 27/03/2022 18:58, Fabien Parent wrote:
> Add basic device-tree for the MT8195 Demo board. The
> Demo board is made by MediaTek and has a MT8195 SoC,
> associated with the MT6359 and MT6360 PMICs, and
> the MT7921 connectivity chip.
>
> The IOs available on that board are:
> * 1 USB Type-C connector with DP aux mode support
> * 1 USB Type-A connector
> * 1 full size HDMI RX and 1 full size HDMI TX connector
> * 1 uSD slot
> * 40 pins header
> * SPI interface header
> * 1 M.2 slot
> * 1 audio jack
> * 1 micro-USB port for serial debug
> * 2 connectors for DSI displays
> * 3 connectors for CSI cameras
> * 1 connector for a eDP panel
> * 1 MMC storage
>
> This commit adds basic support in order to be able to boot.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
> This patch depends on the following patches:
> [0] https://patchwork.kernel.org/project/linux-mediatek/patch/1622011927-359-9-git-send-email-hsin-hsiung.wang@mediatek.com/
> [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220216113131.13145-4-tinghan.shen@mediatek.com/
>
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 539 +++++++++++++++++++
> 2 files changed, 540 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 5da29e7223e4..c7d4636a2cb7 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> new file mode 100644
> index 000000000000..f486cdf7e22b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -0,0 +1,539 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2022 BayLibre, SAS.
> + * Author: Fabien Parent <fparent@baylibre.com>
> + */
> +/dts-v1/;
> +
> +#include "mt8195.dtsi"
> +#include "mt6359.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> +
> +/ {
> + model = "MediaTek MT8195 demo board";
> + compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 12 MiB reserved for OP-TEE (BL32)
> + * +-----------------------+ 0x43e0_0000
> + * | SHMEM 2MiB |
> + * +-----------------------+ 0x43c0_0000
> + * | | TA_RAM 8MiB |
> + * + TZDRAM +--------------+ 0x4340_0000
> + * | | TEE_RAM 2MiB |
> + * +-----------------------+ 0x4320_0000
> + */
> + optee_reserved: optee@43200000 {
> + no-map;
> + reg = <0 0x43200000 0 0x00c00000>;
> + };
> +
> + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> + bl31_secmon_reserved: secmon@54600000 {
> + no-map;
> + reg = <0 0x54600000 0x0 0x30000>;
> + };
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + volume-up {

Generic node names, so "key" or "key-0"

> + gpios = <&pio 106 GPIO_ACTIVE_LOW>;
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + status = "okay";
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + bus-width = <8>;
> + max-frequency = <200000000>;
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-hw-reset;
> + no-sdio;
> + no-sd;
> + hs400-ds-delay = <0x14c11>;
> + vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> + vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> + non-removable;
> +};
> +
> +&pmic {
> + interrupt-parent = <&pio>;
> + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "okay";

What's attached here? Enabling empty i2c controller?

> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
> + status = "okay";

What's attached here? Enabling empty i2c node?

> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + pinctrl-0 = <&i2c2_pins>;
> + pinctrl-names = "default";
> + status = "okay";

What's attached here? Enabling empty i2c node?

> +};
> +
> +&i2c6 {
> + clock-frequency = <400000>;
> + pinctrl-0 = <&i2c6_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + mt6360: mt6360@34 {

Generic node names, so "pmic"?

> + compatible = "mediatek,mt6360";
> + reg = <0x34>;
> + interrupt-controller;
> + interrupt-parent = <&pio>;
> + interrupts = <101 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "IRQB";
> +
> + charger {
> + compatible = "mediatek,mt6360-chg";
> + richtek,vinovp-microvolt = <14500000>;
> +
> + otg_vbus_regulator: usb-otg-vbus-regulator {
> + regulator-compatible = "usb-otg-vbus";
> + regulator-name = "usb-otg-vbus";
> + regulator-min-microvolt = <4425000>;
> + regulator-max-microvolt = <5825000>;
> + };
> + };
> +
> + regulator {
> + compatible = "mediatek,mt6360-regulator";
> + LDO_VIN3-supply = <&mt6360_buck2>;
> +
> + mt6360_buck1: buck1 {
> + regulator-compatible = "BUCK1";
> + regulator-name = "mt6360,buck1";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP
> + MT6360_OPMODE_ULP>;
> + regulator-always-on;
> + };
> +
> + mt6360_buck2: buck2 {
> + regulator-compatible = "BUCK2";
> + regulator-name = "mt6360,buck2";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP
> + MT6360_OPMODE_ULP>;
> + regulator-always-on;
> + };
> +
> + mt6360_ldo1: ldo1 {
> + regulator-compatible = "LDO1";
> + regulator-name = "mt6360,ldo1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> +
> + mt6360_ldo2: ldo2 {
> + regulator-compatible = "LDO2";
> + regulator-name = "mt6360,ldo2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> +
> + mt6360_ldo3: ldo3 {
> + regulator-compatible = "LDO3";
> + regulator-name = "mt6360,ldo3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> +
> + mt6360_ldo5: ldo5 {
> + regulator-compatible = "LDO5";
> + regulator-name = "mt6360,ldo5";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> +
> + mt6360_ldo6: ldo6 {
> + regulator-compatible = "LDO6";
> + regulator-name = "mt6360,ldo6";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> +
> + mt6360_ldo7: ldo7 {
> + regulator-compatible = "LDO7";
> + regulator-name = "mt6360,ldo7";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&spi2 {
> + pinctrl-0 = <&spi2_pins>;
> + pinctrl-names = "default";
> + mediatek,pad-select = <0>;
> + status = "okay";

What is attached here? Empty SPI?


> +};
> +
> +&mt6359_vgpu11_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vsram_others_ldo_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vpu_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vcore_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vproc1_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vproc2_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vsram_md_ldo_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vbbck_ldo_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vrf12_ldo_reg {
> + regulator-always-on;
> +};
> +
> +&mmc1 {

Any reasons to have all overrides/labels ordered randomly? I am not
dreaming about alphabetical order, but at least some logical, so mmc1
next to mmc0...

> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc1_pins_default>;
> + pinctrl-1 = <&mmc1_pins_uhs>;
> + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;
> + max-frequency = <200000000>;
> + cap-sd-highspeed;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + vmmc-supply = <&mt6360_ldo5>;
> + vqmmc-supply = <&mt6360_ldo3>;
> + status = "okay";
> +};
> +
> +&xhci0 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + vbus-supply = <&otg_vbus_regulator>;
> + status = "okay";
> +};
> +
> +&xhci1 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&xhci2 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&xhci3 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&u3phy0 {
> + status = "okay";
> +};
> +
> +&u3phy1 {
> + status = "okay";
> +};
> +
> +&u3phy2 {
> + status = "okay";
> +};
> +
> +&u3phy3 {
> + status = "okay";
> +};
> +
> +&pio {
> + mmc0_pins_default: mmc0default {
> + pins_cmd_dat {

No underscores in node names. Hyphens are accepted.

Same in all other cases below.

> + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins_rst {
> + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc0_pins_uhs: mmc0uhs{
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins_ds {
> + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins_rst {
> + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_default: mmc1-pins-default {
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
> + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins_insert {
> + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
> + bias-pull-up;
> + };
> + };
> +
> + mmc1_pins_uhs: mmc1-pins-uhs {

Any reason keeping it inconsistent with mmc0 about naming? I mean... why
having one naming pattern for mmc0 and entirely different for mmc1? Why
i2c ends with "-pins" suffix and these do not?

> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
> + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> + };
> +
> + i2c0_pins: i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
> + <PINMUX_GPIO9__FUNC_SCL0>;
> + bias-pull-up;
> + mediatek,rsel = <MTK_PULL_SET_RSEL_111>;
> + mediatek,drive-strength-adv = <7>;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pins {
> + pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
> + <PINMUX_GPIO11__FUNC_SCL1>;
> + bias-pull-up;
> + mediatek,rsel = <MTK_PULL_SET_RSEL_111>;
> + mediatek,drive-strength-adv = <7>;
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + pins {
> + pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
> + <PINMUX_GPIO13__FUNC_SCL2>;
> + bias-pull-up;
> + mediatek,rsel = <MTK_PULL_SET_RSEL_111>;
> + mediatek,drive-strength-adv = <7>;
> + };
> + };
> +
> + i2c6_pins: i2c6-pin {
> + pins {
> + pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
> + <PINMUX_GPIO26__FUNC_SCL6>;
> + bias-pull-up;
> + mediatek,rsel = <MTK_PULL_SET_RSEL_111>;
> + };
> + };
> +
> + spi2_pins: spi-pins {
> + pins {
> + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
> + <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
> + <PINMUX_GPIO142__FUNC_SPIM2_MO>,
> + <PINMUX_GPIO143__FUNC_SPIM2_MI>;
> + bias-disable;
> + };
> + };
> +
> + pcie0_pins_default: pcie0default {
> + pins {
> + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
> + <PINMUX_GPIO20__FUNC_PERSTN>,
> + <PINMUX_GPIO21__FUNC_CLKREQN>;
> + bias-pull-up;
> + };
> + };
> +
> + pcie1_pins_default: pcie1default {

No pins suffix? One more pattern of naming...

> + pins {
> + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
> + <PINMUX_GPIO23__FUNC_CLKREQN_1>,
> + <PINMUX_GPIO24__FUNC_WAKEN_1>;
> + bias-pull-up;
> + };
> +
> + mt7921 {
> + pinmux = <PINMUX_GPIO65__FUNC_GPIO65>,
> + <PINMUX_GPIO67__FUNC_GPIO67>;
> + output-high;
> + };
> + };
> +
> + gpio_keys: gpio-keys {

gpio-keys-pins

> + pins {
> + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> + input-enable;
> + };
> + };
> +

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-03-27 20:53    [W:0.051 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site