lkml.org 
[lkml]   [2022]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 1/7] dt-bindings: mfd: pm8008: Modify the compatible as per driver
Date
Modify the compatible string as per the pm8008 mfd driver.
Add reset-gpios property and make interrupts and interrupt-cells
as optional properties, they are not strictly required and may
cause yaml compilation errors when not added in the DT files.

Also, change the node name in example to match with the
pm8008_infra DT node.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
---
Changes in V5:
- Remove compatible for regulators node.
- Move supply nodes of the regulators to chip level.

Changes in V6:
- No changes.

Changes in V7:
- Removed the intermediate regulators node and added ldos
directly under mfd node.

Changes in V8:
- Change the compatible as per driver, remove interrupts from required
properties, add reset-gpios and move regulators to separate binding.

Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..12431ea 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -16,7 +16,7 @@ description: |

properties:
compatible:
- const: qcom,pm8008
+ const: qcom,pm8008-infra

reg:
description:
@@ -44,6 +44,10 @@ properties:
"#size-cells":
const: 0

+ reset-gpios:
+ description: |
+ Specifies the GPIO to be toggled to bring pm8008 chip out of reset.
+
patternProperties:
"^gpio@[0-9a-f]+$":
type: object
@@ -88,10 +92,8 @@ patternProperties:
required:
- compatible
- reg
- - interrupts
- "#address-cells"
- "#size-cells"
- - "#interrupt-cells"

additionalProperties: false

@@ -99,11 +101,12 @@ examples:
- |
#include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
qupv3_se13_i2c {
#address-cells = <1>;
#size-cells = <0>;
- pm8008i@8 {
- compatible = "qcom,pm8008";
+ pm8008_infra: pmic@8 {
+ compatible = "qcom,pm8008-infra";
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +116,8 @@ examples:
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;

+ reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_HIGH>;
+
pm8008_gpios: gpio@c000 {
compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--
2.7.4
\
 
 \ /
  Last update: 2022-03-25 12:59    [W:2.059 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site