lkml.org 
[lkml]   [2022]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 net-next 2/4] net: switchdev: add support for offloading of fdb locked flag
Date
On tor, mar 24, 2022 at 16:27, Vladimir Oltean <olteanv@gmail.com> wrote:
> On Thu, Mar 24, 2022 at 12:23:39PM +0100, Hans Schultz wrote:
>> On tor, mar 24, 2022 at 13:09, Vladimir Oltean <olteanv@gmail.com> wrote:
>> > On Thu, Mar 24, 2022 at 11:32:08AM +0100, Hans Schultz wrote:
>> >> On ons, mar 23, 2022 at 16:43, Vladimir Oltean <olteanv@gmail.com> wrote:
>> >> > On Wed, Mar 23, 2022 at 01:49:32PM +0100, Hans Schultz wrote:
>> >> >> >> Does someone have an idea why there at this point is no option to add a
>> >> >> >> dynamic fdb entry?
>> >> >> >>
>> >> >> >> The fdb added entries here do not age out, while the ATU entries do
>> >> >> >> (after 5 min), resulting in unsynced ATU vs fdb.
>> >> >> >
>> >> >> > I think the expectation is to use br_fdb_external_learn_del() if the
>> >> >> > externally learned entry expires. The bridge should not age by itself
>> >> >> > FDB entries learned externally.
>> >> >> >
>> >> >>
>> >> >> It seems to me that something is missing then?
>> >> >> My tests using trafgen that I gave a report on to Lunn generated massive
>> >> >> amounts of fdb entries, but after a while the ATU was clean and the fdb
>> >> >> was still full of random entries...
>> >> >
>> >> > I'm no longer sure where you are, sorry..
>> >> > I think we discussed that you need to enable ATU age interrupts in order
>> >> > to keep the ATU in sync with the bridge FDB? Which means either to
>> >> > delete the locked FDB entries from the bridge when they age out in the
>> >> > ATU, or to keep refreshing locked ATU entries.
>> >> > So it seems that you're doing neither of those 2 things if you end up
>> >> > with bridge FDB entries which are no longer in the ATU.
>> >>
>> >> Any idea why G2 offset 5 ATUAgeIntEn (bit 10) is set? There is no define
>> >> for it, so I assume it is something default?
>> >
>> > No idea, but I can confirm that the out-of-reset value I see for
>> > MV88E6XXX_G2_SWITCH_MGMT on 6190 and 6390 is 0x400. It's best not to
>> > rely on any reset defaults though.
>>
>> I see no age out interrupts, even though the ports Age Out Int is on
>> (PAV bit 14) on the locked port, and the ATU entries do age out (HoldAt1
>> is off). Any idea why that can be?
>>
>> I combination with this I think it would be nice to have an ability to
>> set the AgeOut time even though it is not per port but global.
>
> Sorry, I just don't know. Looking at the documentation for IntOnAgeOut,
> I see it says that for an ATU entry to trigger an age out interrupt, the
> port it's associated with must have IntOnAgeOut set.
> But your locked ATU entries aren't associated with any port, they have
> DPV=0, right? So will they never trigger any age out interrupt according
> to this? I'm not clear.

If it could be possible to add a dynamic entry to the bridge module from
the driver, that would be a solution, and since in the ATU in this case
ages out entries learned, I don't see why __br_fdb_add() insists that an
external learned entry must be permanent?

\
 
 \ /
  Last update: 2022-03-25 10:24    [W:0.180 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site