lkml.org 
[lkml]   [2022]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 09/10] arm64: dts: imx8mm-verdin: note about disabled sd1 pull-ups
Date
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Add a note about us using discrete external on-module resistors
pulling-up to the on-module +V3.3_1.8_SD (LDO5) rail and explicitly
disabling the internal pull-ups due to ERR050080 [1]:

IO: Degradation of internal IO pullup/pulldown current capability for
IO’s continuously driven in a 3.3V operating mode

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MM_0N87W

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 6e1c762fd2e7..97dd7a00d63b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -1179,6 +1179,10 @@ pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */
};

+ /*
+ * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
+ * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
+ */
pinctrl_usdhc2: usdhc2grp {
fsl,pins =
<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>,
--
2.34.1
\
 
 \ /
  Last update: 2022-03-24 16:59    [W:0.054 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site