lkml.org 
[lkml]   [2022]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding
On Mon, 28 Feb 2022 14:12:50 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> U-Boot uses environment variables for storing device setup data. It
> usually needs to be accessed by a bootloader, kernel and often
> user-space.
>
> This binding allows describing environment data located in a raw flash
> partition. It's treated as NVMEM device and can be reused later for
> other storage devices.
>
> Using DT should be cleaner than hardcoding & duplicating such info in
> multiple places. Bootloader & kernel can share DTS and user-space can
> try reading it too or just have correct data exposed by a kernel.
>
> A custom "compatible" string allows system to automatically load
> relevant NVMEM driver but phandle can be also used for reading raw
> location.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> V2: Update descriptions to don't make this binding MTD (flash partition)
> specific. Mention multiple possible storage ways.
> V3: Drop
> allOf:
> - $ref: nvmem.yaml#
> as we don't use anything rom the nvmem.yaml. Thanks Rob.
> ---
> .../devicetree/bindings/nvmem/u-boot,env.yaml | 62 +++++++++++++++++++
> MAINTAINERS | 5 ++
> 2 files changed, 67 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
>

Applied, thanks!

\
 
 \ /
  Last update: 2022-03-23 17:57    [W:0.077 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site