Messages in this thread | | | Date | Wed, 23 Mar 2022 10:05:54 +0100 | Subject | Re: [PATCH 1/2] dt-bindings: usb: Add documentation for AM62 USB Wrapper module | From | Krzysztof Kozlowski <> |
| |
On 23/03/2022 06:35, Aswath Govindraju wrote: > Add bindings for the TI's AM62 wrapper module for the Synopsys USBSS-DRD > controller. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > --- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 98 +++++++++++++++++++ > 1 file changed, 98 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > > diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > new file mode 100644 > index 000000000000..4bb139d1926d > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Bindings for the TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
Skip the "Bindings for the", just leave the HW description.
> + > +maintainers: > + - Aswath Govindraju <a-govindraju@ti.com> > + > +properties: > + compatible: > + const: ti,am62-usb > + > + reg: > + maxItems: 1 > + > + ranges: true > + > + power-domains: > + description: > + PM domain provider node and an args specifier containing > + the USB ISO device id value. See, > + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml > + maxItems: 1 > + > + clocks: > + description: Clock phandles to usb2_refclk > + maxItems: 1 > + > + clock-names: > + items: > + - const: ref > + > + id-gpio: > + description: > + GPIO to be used as ID pin > + maxItems: 1 > + > + interrupts: > + description: > + interrupt line to be used for detecting changes in VBUS > + > + ti,vbus-divider: > + description: > + Should be present if USB VBUS line is connected to the > + VBUS pin of the SoC via a 1/3 voltage divider. > + type: boolean > + > + ti,syscon-phy-pll-refclk: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + - items: > + - description: Phandle to the SYSCON entry > + - description: USB phy control register offset within SYSCON > + description: Specifier for configuring frequency of ref clock input.
This is a bit strange. The ref clock is the "ref" input clock, right? In such case use clk_set_rate()... Using syscon for managing clocks is not the proper way.
Plus all the issues pointed out by Roger.
> + > + '#address-cells': > + const: 2 > + > + '#size-cells': > + const: 2
No children allowed?
I understand this is a wrapper, which explains why you do not include usb-hcd.yaml schema. But since it is a wrapper, what is it wrapping?
> + > +required: > + - compatible > + - reg > + - power-domains > + - clocks > + - clock-names > + - interrupts > + - ti,syscon-phy-pll-refclk > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/gpio/gpio.h> > + > + bus { > + #address-cells = <2>; > + #size-cells = <2>; > + > + dwc3-usb@f910000 {
Generic node name, so usb.
> + compatible = "ti,am62-usb";
Best regards, Krzysztof
| |