lkml.org 
[lkml]   [2022]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] ata: ahci: Skip 200 ms debounce delay for AMD 300 Series Chipset SATA Controller
From
Dear Damien,


Am 23.03.22 um 09:24 schrieb Damien Le Moal:
> On 3/23/22 15:55, Paul Menzel wrote:

>> Am 23.03.22 um 06:01 schrieb Damien Le Moal:
>>> On 3/22/22 06:51, Limonciello, Mario wrote:

>>>>> -----Original Message-----
>>>>> From: Paul Menzel <pmenzel@molgen.mpg.de>
>>>>> Sent: Monday, March 21, 2022 16:25
>>
>> […]
>>
>>>> I seem to recall that we were talking about trying to drop the debounce delay for
>>>> everything, weren't we?
>>>>
>>>> So perhaps it would be right to add a 4th patch in the series to do just that. Then
>>>> If this turns out to be problematic for anything other than the controllers in the
>>>> series that you identified as not problematic then that 4th patch can potentially
>>>> be reverted alone?
>>>
>>> Not quite everything :) But you are right, let's try to switch the default
>>> to no delay. I will be posting patches today for that.
>>>
>>> Paul,
>>>
>>> With these patches, your patches are not necessary anymore as the AMD
>>> chipset falls under the default no-delay.
>>
>> I am all for improving the situation for all devices, but I am unable to
>> judge the regression potential of changing this, as it affects a lot of
>> devices. I guess it’d would go through the next tree, and hopefully the
>> company QA teams can give it a good spin. I hoped that my patches, as I
>> have tested them, and AMD will hopefully too, could go into the current
>> merge window.
>
> Yes, correct, the plan is to get the generic series queued as soon as rc1
> so that it can spend plenty of time in linux-next for people to test. That
> will hopefully reduce the risk of breaking things in the field. Same for
> the default LPM change.

But 5.18 or 5.19? If 5.18, sounds good to me, if 5.19, I’d be great if
my patches go into 5.18 cycle, as they have been tested, and it would
mean the whole change gets tested more widely already.

> With the default removal of the debounce delay, your patches addressing
> only the AMD adapter are not needed anymore: this adapter will not have a
> debounce delay unless the ATA_LFLAG_DEBOUNCE_DELAY flag is set.

Yes, I understand.

>>> It would be nice if you can test though.
>>
>> Of course, I am going to that either way.
>
> Series posted with you on CC. Please test !

Thank you. I am going to test it in the coming days, and report back.

Maybe more people should be put in Cc (Dell, Lenovo, IBM, x86 subsystem)
with a request to test this?


Kind regards,

Paul

\
 
 \ /
  Last update: 2022-03-23 09:38    [W:1.368 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site