lkml.org 
[lkml]   [2022]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/6] ASoC: mediatek: mt8195: merge machine driver
From
Date
On Mon, 2022-03-21 at 23:12 +0800, Tzung-Bi Shih wrote:
> On Mon, Mar 21, 2022 at 03:23:08PM +0800, Trevor Wu wrote:
> > -config SND_SOC_MT8195_MT6359_RT1019_RT5682
> > - tristate "ASoC Audio driver for MT8195 with MT6359 RT1019
> > RT5682 codec"
> > - depends on I2C && GPIOLIB
> > - depends on SND_SOC_MT8195 && MTK_PMIC_WRAP
> > - select SND_SOC_MT6359
> > - select SND_SOC_RT1015P
> > - select SND_SOC_RT5682_I2C
> > - select SND_SOC_RT5682S
> > - select SND_SOC_DMIC
> > - select SND_SOC_HDMI_CODEC
> > - help
> > - This adds ASoC driver for Mediatek MT8195 boards
> > - with the MT6359 RT1019 RT5682 audio codec.
> > - Select Y if you have such device.
> > - If unsure select "N".
> > -
> > -config SND_SOC_MT8195_MT6359_RT1011_RT5682
> > - tristate "ASoC Audio driver for MT8195 with MT6359 RT1011
> > RT5682 codec"
> > +config SND_SOC_MT8195_MT6359
> > + tristate "ASoC Audio driver for MT8195 with MT6359 and I2S
> > codec"
>
> s/codec/codecs/.

OK.
>
> > help
> > - This adds ASoC driver for Mediatek MT8195 boards
> > - with the MT6359 RT1011 RT5682 audio codec.
> > + This adds support for ASoC machine driver for Mediatek
> > MT8195
> > + boards with the MT6359 and other I2S audio codec.
>
> s/codec/codecs/.
OK.

>
> > diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-
> > rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359.c
>
> [...]
> > +static int mt8195_rt1011_etdm_hw_params(struct snd_pcm_substream
> > *substream,
> > + struct snd_pcm_hw_params
> > *params)
> > +{
> > + struct snd_soc_pcm_runtime *rtd =
> > asoc_substream_to_rtd(substream);
> > + struct snd_soc_dai *codec_dai;
> > + struct snd_soc_card *card = rtd->card;
> > + int srate, i, ret = 0;
> > +
> > + srate = params_rate(params);
> > +
> > + for_each_rtd_codec_dais(rtd, i, codec_dai) {
> > + ret = snd_soc_dai_set_pll(codec_dai, 0,
> > RT1011_PLL1_S_BCLK,
> > + 64 * srate, 256 * srate);
> > + if (ret < 0) {
> > + dev_err(card->dev, "codec_dai clock not
> > set\n");
> > + return ret;
> > + }
> > +
> > + ret = snd_soc_dai_set_sysclk(codec_dai,
> > + RT1011_FS_SYS_PRE_S_PLL1,
> > + 256 * srate,
> > SND_SOC_CLOCK_IN);
> > + if (ret < 0) {
> > + dev_err(card->dev, "codec_dai clock not
> > set\n");
> > + return ret;
> > + }
> > + }
> > + return ret;
>
> I guess it may be just copied from mt8195-mt6359-rt1011-
> rt5682.c. However, it
> is good to turn the code into a better shape. To be clear, just
> return 0 here
> so that the initialization can be removed.
>
Yes, I copied it directly.
I will update this in v4.

> > +static int mt8195_rt1011_init(struct snd_soc_pcm_runtime *rtd)
>
> [...]
> > + ret = snd_soc_dapm_add_routes(&card->dapm,
> > mt8195_rt1011_routes,
> > + ARRAY_SIZE(mt8195_rt1011_routes))
> > ;
> > +
> > + if (ret)
>
> Remove the extra blank line.

OK. I didn't notice the blank line.
>
> > +static int mt8195_rt1019_init(struct snd_soc_pcm_runtime *rtd)
>
> [...]
> > + ret = snd_soc_dapm_add_routes(&card->dapm,
> > mt8195_rt1019_routes,
> > + ARRAY_SIZE(mt8195_rt1019_routes))
> > ;
> > +
> > + if (ret)
>
> Remove the extra blank line.

OK.

Thanks,
Trevor

\
 
 \ /
  Last update: 2022-03-23 09:18    [W:0.051 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site