lkml.org 
[lkml]   [2022]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] ioctl_userfaultfd.2, userfaultfd.2: add minor fault mode
On Mon, Aug 2, 2021 at 5:21 AM Alejandro Colomar (man-pages)
<alx.manpages@gmail.com> wrote:
>
> Hi Mike, Axel,
>
> On 8/2/21 1:21 PM, Mike Rapoport wrote:
> > (added man-pages maintainers)
>
> Thanks! If I'm not CCed, I may not notice the email, depending on the
> traffic of the lists, and the amount of time I have ;)
>
> >
> > On Tue, Jul 27, 2021 at 09:32:34AM -0700, Axel Rasmussen wrote:
> >> Any remaining issues with this patch? I just realized today it was
> >> never merged. 5.13 (which contains this new feature) was released some
> >> weeks ago.
>
> Please see some minor formatting issues I commented below.
> Other than that, it looks good to me.
>
> Thanks,
>
> Alex
>
> >>
> >> On Fri, Jun 4, 2021 at 12:56 PM Axel Rasmussen <axelrasmussen@google.com> wrote:
> >>>
> >>> Userfaultfd minor fault mode is supported starting from Linux 5.13.
> >>>
> >>> This commit adds a description of the new mode, as well as the new ioctl
> >>> used to resolve such faults. The two go hand-in-hand: one can't resolve
> >>> a minor fault without continue, and continue can't be used to resolve
> >>> any other kind of fault.
> >>>
> >>> This patch covers just the hugetlbfs implementation (in 5.13). Support
> >>> for shmem is forthcoming, but as it has not yet made it into a kernel
> >>> release candidate, it will be added in a future commit.
> >>>
> >>> Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
> >>> ---
> >>> man2/ioctl_userfaultfd.2 | 125 ++++++++++++++++++++++++++++++++++++---
> >>> man2/userfaultfd.2 | 79 ++++++++++++++++++++-----
> >>> 2 files changed, 182 insertions(+), 22 deletions(-)
> >>>
> >>> diff --git a/man2/ioctl_userfaultfd.2 b/man2/ioctl_userfaultfd.2
> >>> index 504f61d4b..7b990c24a 100644
> >>> --- a/man2/ioctl_userfaultfd.2
> >>> +++ b/man2/ioctl_userfaultfd.2
> >>> @@ -214,6 +214,10 @@ memory accesses to the regions registered with userfaultfd.
> >>> If this feature bit is set,
> >>> .I uffd_msg.pagefault.feat.ptid
> >>> will be set to the faulted thread ID for each page-fault message.
> >>> +.TP
> >>> +.BR UFFD_FEATURE_MINOR_HUGETLBFS " (since Linux 5.13)"
> >>> +If this feature bit is set, the kernel supports registering userfaultfd ranges
> >>> +in minor mode on hugetlbfs-backed memory areas.
>
> See the folowing extract from man-pages(7):
>
> Use semantic newlines
> In the source of a manual page, new sentences should be
> started on new lines, and long sentences should be split
> into lines at clause breaks (commas, semicolons, colons,
> and so on). This convention, sometimes known as "semantic
> newlines", makes it easier to see the effect of patches,
> which often operate at the level of individual sentences or
> sentence clauses.
>
> A trick to check if some text is correct at first glance, is that the
> following regex should rarely match:
> [,;:.] \+\w
>
> Multi-sentence parenthetical expressions should also go on separate
> lines normally.
>
> I'd for example break the above text into:
>
> [
> If this feature bit is set,
> the kernel supports registering userfaultfd ranges
> in minor mode on hugetlbfs-backed memory areas
> ]
>
> Note the break after the comma, and another break at a sensible point
> (you already did that one correctly in this example, but some below don't).
>
>
> >>> .PP
> >>> The returned
> >>> .I ioctls
> >>> @@ -240,6 +244,11 @@ operation is supported.
> >>> The
> >>> .B UFFDIO_WRITEPROTECT
> >>> operation is supported.
> >>> +.TP
> >>> +.B 1 << _UFFDIO_CONTINUE
> >>> +The
> >>> +.B UFFDIO_CONTINUE
> >>> +operation is supported.
> >>> .PP
> >>> This
> >>> .BR ioctl (2)
> >>> @@ -278,14 +287,8 @@ by the current kernel version.
> >>> (Since Linux 4.3.)
> >>> Register a memory address range with the userfaultfd object.
> >>> The pages in the range must be "compatible".
> >>> -.PP
> >>> -Up to Linux kernel 4.11,
> >>> -only private anonymous ranges are compatible for registering with
> >>> -.BR UFFDIO_REGISTER .
> >>> -.PP
> >>> -Since Linux 4.11,
> >>> -hugetlbfs and shared memory ranges are also compatible with
> >>> -.BR UFFDIO_REGISTER .
> >>> +Please refer to the list of register modes below for the compatible memory
> >>> +backends for each mode.
>
> Regarding semantic newlines mentioned above:
>
> Here for example, a more sensible point to break the line would be just
> after (or maybe before, up to you) the first "for".
>
> >>> .PP
> >>> The
> >>> .I argp
> >>> @@ -324,9 +327,16 @@ the specified range:
> >>> .TP
> >>> .B UFFDIO_REGISTER_MODE_MISSING
> >>> Track page faults on missing pages.
> >>> +Since Linux 4.3, only private anonymous ranges are compatible.
> >>> +Since Linux 4.11, hugetlbfs and shared memory ranges are also compatible.
> >>> .TP
> >>> .B UFFDIO_REGISTER_MODE_WP
> >>> Track page faults on write-protected pages.
> >>> +Since Linux 5.7, only private anonymous ranges are compatible.
> >>> +.TP
> >>> +.B UFFDIO_REGISTER_MODE_MINOR
> >>> +Track minor page faults.
> >>> +Since Linux 5.13, only hugetlbfs ranges are compatible.
> >>> .PP
> >>> If the operation is successful, the kernel modifies the
> >>> .I ioctls
> >>> @@ -735,6 +745,105 @@ or not registered with userfaultfd write-protect mode.
> >>> .TP
> >>> .B EFAULT
> >>> Encountered a generic fault during processing.
> >>> +.\"
> >>> +.SS UFFDIO_CONTINUE
> >>> +(Since Linux 5.13.)
> >>> +Resolve a minor page fault by installing page table entries for existing pages
> >>> +in the page cache.
> >>> +.PP
> >>> +The
> >>> +.I argp
> >>> +argument is a pointer to a
> >>> +.I uffdio_continue
> >>> +structure as shown below:
> >>> +.PP
> >>> +.in +4n
> >>> +.EX
> >>> +struct uffdio_continue {
> >>> + struct uffdio_range range; /* Range to install PTEs for and continue */
> >>> + __u64 mode; /* Flags controlling the behavior of continue */
> >>> + __s64 mapped; /* Number of bytes mapped, or negated error */
> >>> +};
> >>> +.EE
> >>> +.in
> >>> +.PP
> >>> +The following value may be bitwise ORed in
> >>> +.IR mode
> >>> +to change the behavior of the
> >>> +.B UFFDIO_CONTINUE
> >>> +operation:
> >>> +.TP
> >>> +.B UFFDIO_CONTINUE_MODE_DONTWAKE
> >>> +Do not wake up the thread that waits for page-fault resolution.
> >>> +.PP
> >>> +The
> >>> +.I mapped
> >>> +field is used by the kernel to return the number of bytes
> >>> +that were actually mapped, or an error in the same manner as
> >>> +.BR UFFDIO_COPY .
> >>> +If the value returned in the
> >>> +.I mapped
> >>> +field doesn't match the value that was specified in
> >>> +.IR range.len ,
> >>> +the operation fails with the error
> >>> +.BR EAGAIN .
> >>> +The
> >>> +.I mapped
> >>> +field is output-only;
> >>> +it is not read by the
> >>> +.B UFFDIO_CONTINUE
> >>> +operation.
> >>> +.PP
> >>> +This
> >>> +.BR ioctl (2)
> >>> +operation returns 0 on success.
> >>> +In this case, the entire area was mapped.
> >>> +On error, \-1 is returned and
> >>> +.I errno
> >>> +is set to indicate the error.
> >>> +Possible errors include:
> >>> +.TP
> >>> +.B EAGAIN
> >>> +The number of bytes mapped (i.e., the value returned in the
> >>> +.I mapped
> >>> +field) does not equal the value that was specified in the
> >>> +.I range.len
> >>> +field.
> >>> +.TP
> >>> +.B EINVAL
> >>> +Either
> >>> +.I range.start
> >>> +or
> >>> +.I range.len
> >>> +was not a multiple of the system page size; or
> >>> +.I range.len
> >>> +was zero; or the range specified was invalid.
> >>> +.TP
> >>> +.B EINVAL
> >>> +An invalid bit was specified in the
> >>> +.IR mode
> >>> +field.
> >>> +.TP
> >>> +.B EEXIST
> >>> +One or more pages were already mapped in the given range.
> >>> +.TP
> >>> +.B ENOENT
> >>> +The faulting process has changed its virtual memory layout simultaneously with
> >>> +an outstanding
> >>> +.B UFFDIO_CONTINUE
> >>> +operation.
> >>> +.TP
> >>> +.B ENOMEM
> >>> +Allocating memory needed to setup the page table mappings failed.
> >>> +.TP
> >>> +.B EFAULT
> >>> +No existing page could be found in the page cache for the given range.
> >>> +.TP
> >>> +.BR ESRCH
> >>> +The faulting process has exited at the time of a
> >>> +.B UFFDIO_CONTINUE
> >>> +operation.
> >>> +.\"
> >>> .SH RETURN VALUE
> >>> See descriptions of the individual operations, above.
> >>> .SH ERRORS
> >>> diff --git a/man2/userfaultfd.2 b/man2/userfaultfd.2
> >>> index 593c189d8..07f53c6ff 100644
> >>> --- a/man2/userfaultfd.2
> >>> +++ b/man2/userfaultfd.2
> >>> @@ -78,7 +78,7 @@ all memory ranges that were registered with the object are unregistered
> >>> and unread events are flushed.
> >>> .\"
> >>> .PP
> >>> -Userfaultfd supports two modes of registration:
> >>> +Userfaultfd supports three modes of registration:
> >>> .TP
> >>> .BR UFFDIO_REGISTER_MODE_MISSING " (since 4.10)"
> >>> When registered with
> >>> @@ -92,6 +92,18 @@ or an
> >>> .B UFFDIO_ZEROPAGE
> >>> ioctl.
> >>> .TP
> >>> +.BR UFFDIO_REGISTER_MODE_MINOR " (since 5.13)"
> >>> +When registered with
> >>> +.B UFFDIO_REGISTER_MODE_MINOR
> >>> +mode, user-space will receive a page-fault notification
>
> s/user-space/user space/
>
> See the following extract from man-pages(7):
>
> Preferred terms
> The following table lists some preferred terms to use in
> man pages, mainly to ensure consistency across pages.
>
> Term Avoid using Notes
> ─────────────────────────────────────────────────────────────
> [...]
> user space userspace
>
> However, when user space is used as an adjective, per the usual English
> rules, we write "user-space". Example: "a user-space program".

100% agreed that "user space" is more correct, but this man page
already has many instances of "user-space" in it. I'd suggest we
either fix all of them, or just follow the existing convention within
this page.

How about, leaving this as-is for this patch, to keep the diff tidy,
and I can send a follow-up patch to fix all the instances of this in
this page?

>
> >>> +when a minor page fault occurs.
> >>> +That is, when a backing page is in the page cache, but
> >>> +page table entries don't yet exist.
> >>> +The faulted thread will be stopped from execution until the page fault is
> >>> +resolved from user-space by an
> >>> +.B UFFDIO_CONTINUE
> >>> +ioctl.
> >>> +.TP
> >>> .BR UFFDIO_REGISTER_MODE_WP " (since 5.7)"
> >>> When registered with
> >>> .B UFFDIO_REGISTER_MODE_WP
> >>> @@ -212,9 +224,10 @@ a page fault occurring in the requested memory range, and satisfying
> >>> the mode defined at the registration time, will be forwarded by the kernel to
> >>> the user-space application.
> >>> The application can then use the
> >>> -.B UFFDIO_COPY
> >>> +.B UFFDIO_COPY ,
> >>> +.B UFFDIO_ZEROPAGE ,
> >>> or
> >>> -.B UFFDIO_ZEROPAGE
> >>> +.B UFFDIO_CONTINUE
> >>> .BR ioctl (2)
> >>> operations to resolve the page fault.
> >>> .PP
> >>> @@ -318,6 +331,43 @@ should have the flag
> >>> cleared upon the faulted page or range.
> >>> .PP
> >>> Write-protect mode supports only private anonymous memory.
> >>> +.\"
> >>> +.SS Userfaultfd minor fault mode (since 5.13)
> >>> +Since Linux 5.13, userfaultfd supports minor fault mode.
> >>> +In this mode, fault messages are produced not for major faults (where the
> >>> +page was missing), but rather for minor faults, where a page exists in the page
> >>> +cache, but the page table entries are not yet present.
> >>> +The user needs to first check availability of this feature using
> >>> +.B UFFDIO_API
> >>> +ioctl against the feature bit
> >>> +.B UFFD_FEATURE_MINOR_HUGETLBFS
> >>> +before using this feature.
> >>> +.PP
> >>> +To register with userfaultfd minor fault mode, the user needs to initiate the
> >>> +.B UFFDIO_REGISTER
> >>> +ioctl with mode
> >>> +.B UFFD_REGISTER_MODE_MINOR
> >>> +set.
> >>> +.PP
> >>> +When a minor fault occurs, user-space will receive a page-fault notification
> >>> +whose
> >>> +.I uffd_msg.pagefault.flags
> >>> +will have the
> >>> +.B UFFD_PAGEFAULT_FLAG_MINOR
> >>> +flag set.
> >>> +.PP
> >>> +To resolve a minor page fault, the handler should decide whether or not the
> >>> +existing page contents need to be modified first.
> >>> +If so, this should be done in-place via a second, non-userfaultfd-registered
> >>> +mapping to the same backing page (e.g., by mapping the hugetlbfs file twice).
> >>> +Once the page is considered "up to date", the fault can be resolved by
> >>> +initiating an
> >>> +.B UFFDIO_CONTINUE
> >>> +ioctl, which installs the page table entries and (by default) wakes up the
> >>> +faulting thread(s).
> >>> +.PP
> >>> +Minor fault mode supports only hugetlbfs-backed memory.
> >>> +.\"
> >>> .SS Reading from the userfaultfd structure
> >>> Each
> >>> .BR read (2)
> >>> @@ -456,19 +506,20 @@ For
> >>> the following flag may appear:
> >>> .RS
> >>> .TP
> >>> -.B UFFD_PAGEFAULT_FLAG_WRITE
> >>> -If the address is in a range that was registered with the
> >>> -.B UFFDIO_REGISTER_MODE_MISSING
> >>> -flag (see
> >>> -.BR ioctl_userfaultfd (2))
> >>> -and this flag is set, this a write fault;
> >>> -otherwise it is a read fault.
> >>> +.B UFFD_PAGEFAULT_FLAG_WP
> >>> +If this flag is set, then the fault was a write-protect fault.
> >>> .TP
> >>> +.B UFFD_PAGEFAULT_FLAG_MINOR
> >>> +If this flag is set, then the fault was a minor fault.
> >>> +.TP
> >>> +.B UFFD_PAGEFAULT_FLAG_WRITE
> >>> +If this flag is set, then the fault was a write fault.
> >>> +.HP
>
> See the following extract from groff_man(7):
>
> Deprecated features
> Use of the following is discouraged.
>
> [...]
>
> .HP [indent]
> Set up a paragraph with a hanging left indentation.
> The indent argument, if present, is handled as with
> .TP.
>
> Use of this presentation‐level macro is deprecated.
> While it is universally portable to legacy Unix sys‐
> tems, a hanging indentation cannot be expressed nat‐
> urally under HTML, and many HTML‐based manual view‐
> ers simply interpret it as a starter for a normal
> paragraph. Thus, any information or distinction you
> tried to express with the indentation may be lost.
>
> I'd just use .PP here, I think.
>
>
> >>> +If neither
> >>> .B UFFD_PAGEFAULT_FLAG_WP
> >>> -If the address is in a range that was registered with the
> >>> -.B UFFDIO_REGISTER_MODE_WP
> >>> -flag, when this bit is set, it means it is a write-protect fault.
> >>> -Otherwise it is a page-missing fault.
> >>> +nor
> >>> +.B UFFD_PAGEFAULT_FLAG_MINOR
> >>> +are set, then the fault was a missing fault.
> >>> .RE
> >>> .TP
> >>> .I pagefault.feat.pid
> >>> --
> >>> 2.32.0.rc1.229.g3e70b5a671-goog
> >>>
> >>
> >
>
>
> --
> Alejandro Colomar
> Linux man-pages comaintainer; https://www.kernel.org/doc/man-pages/
> http://www.alejandro-colomar.es/

\
 
 \ /
  Last update: 2022-03-22 17:32    [W:0.069 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site