lkml.org 
[lkml]   [2022]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm64: dts: uDPU: correct temperature sensors
Date
uDPU has a pair of NCT375 temperature sensors, which are TMP75C compatible
as far as the driver is concerned.

The current LM75 compatible worked as all of the LM75 compatible sensors
are backwards compatible with the original part, but it meant that lower
resolution and incorrect sample rate was being used.

The "lm75" compatible has been deprecated anyway and is meant as fallback
in order to keep older DTS-es working.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v2:
* None
---
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index ac64949bb53e..1f534c0c65f7 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -153,15 +153,15 @@ &i2c1 {
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

- lm75@48 {
+ nct375@48 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x48>;
};

- lm75@49 {
+ nct375@49 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x49>;
};
};
--
2.35.1
\
 
 \ /
  Last update: 2022-03-22 11:59    [W:0.077 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site