lkml.org 
[lkml]   [2022]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/2] pwm: sunplus-pwm: Add Sunplus SoC SP7021 PWM Driver
Date
Add Sunplus SoC SP7021 PWM Driver

Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
---
Changes in v4:
- Addressed all comments from Uwe Kleine-König.
1. define name change based on datasheet.
2. apply() period calculation modified by Uwe Kleine-König recommanded.
3. use FIELD_GET / FIELD_PREP for simplify code.
- Addressed all comments from Rob Herring.
git-send-email asking encoding and press y casued message corrupted issue.
just press enter to keep UTF-8 default setting.

MAINTAINERS | 1 +
drivers/pwm/Kconfig | 11 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sunplus.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 245 insertions(+)
create mode 100644 drivers/pwm/pwm-sunplus.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e1cb7eb..6644bae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18535,6 +18535,7 @@ SUNPLUS PWM DRIVER
M: Hammer Hsieh <hammerh0314@gmail.com>
S: Maintained
F: Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
+F: drivers/pwm/pwm-sunplus.c

SUNPLUS RTC DRIVER
M: Vincent Shih <vincent.sunplus@gmail.com>
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 21e3b05..54cfb50 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -572,6 +572,17 @@ config PWM_SUN4I
To compile this driver as a module, choose M here: the module
will be called pwm-sun4i.

+config PWM_SUNPLUS
+ tristate "Sunplus PWM support"
+ depends on ARCH_SUNPLUS || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ help
+ Generic PWM framework driver for the PWM controller on
+ Sunplus SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-sunplus.
+
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 708840b..be58616 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
+obj-$(CONFIG_PWM_SUNPLUS) += pwm-sunplus.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
diff --git a/drivers/pwm/pwm-sunplus.c b/drivers/pwm/pwm-sunplus.c
new file mode 100644
index 0000000..e776fd1
--- /dev/null
+++ b/drivers/pwm/pwm-sunplus.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PWM device driver for SUNPLUS SP7021 SoC
+ *
+ * Links:
+ * Reference Manual:
+ * https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+ *
+ * Reference Manual(PWM module):
+ * https://sunplus.atlassian.net/wiki/spaces/doc/pages/461144198/12.+Pulse+Width+Modulation+PWM
+ *
+ * Limitations:
+ * - Only supports normal polarity.
+ * - It output low when PWM channel disabled.
+ * - When the parameters change, current running period will not be completed
+ * and run new settings immediately.
+ * - In .apply() PWM output need to write register FREQ and DUTY. When first write FREQ
+ * done and not yet write DUTY, it has short timing gap use new FREQ and old DUTY.
+ *
+ * Author: Hammer Hsieh <hammerh0314@gmail.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define SP7021_PWM_MODE0 0x000
+#define SP7021_PWM_MODE0_PWMEN(ch) BIT(ch)
+#define SP7021_PWM_MODE0_BYPASS(ch) BIT(8 + (ch))
+#define SP7021_PWM_MODE1 0x004
+#define SP7021_PWM_MODE1_CNT_EN(ch) BIT(ch)
+#define SP7021_PWM_FREQ(ch) (0x008 + 4 * (ch))
+#define SP7021_PWM_FREQ_MAX GENMASK(15, 0)
+#define SP7021_PWM_DUTY(ch) (0x018 + 4 * (ch))
+#define SP7021_PWM_DUTY_DD_SEL(ch) FIELD_PREP(GENMASK(9, 8), ch)
+#define SP7021_PWM_DUTY_MAX GENMASK(7, 0)
+#define SP7021_PWM_DUTY_MASK SP7021_PWM_DUTY_MAX
+#define SP7021_PWM_FREQ_SCALER 256
+#define SP7021_PWM_NUM 4
+
+struct sunplus_pwm {
+ struct pwm_chip chip;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline struct sunplus_pwm *to_sunplus_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct sunplus_pwm, chip);
+}
+
+static int sunplus_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct sunplus_pwm *priv = to_sunplus_pwm(chip);
+ u32 dd_freq, duty, mode0, mode1;
+ u64 clk_rate;
+
+ if (state->polarity != pwm->state.polarity)
+ return -EINVAL;
+
+ if (!state->enabled) {
+ /* disable pwm channel output */
+ mode0 = readl(priv->base + SP7021_PWM_MODE0);
+ mode0 &= ~SP7021_PWM_MODE0_PWMEN(pwm->hwpwm);
+ writel(mode0, priv->base + SP7021_PWM_MODE0);
+ /* disable pwm channel clk source */
+ mode1 = readl(priv->base + SP7021_PWM_MODE1);
+ mode1 &= ~SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm);
+ writel(mode1, priv->base + SP7021_PWM_MODE1);
+ return 0;
+ }
+
+ clk_rate = clk_get_rate(priv->clk);
+
+ /*
+ * The following calculations might overflow if clk is bigger
+ * than 256 GHz. In practise it's 202.5MHz, so this limitation
+ * is only theoretic.
+ */
+ if (clk_rate > (u64)SP7021_PWM_FREQ_SCALER * NSEC_PER_SEC)
+ return -EINVAL;
+
+ /*
+ * With clk_rate limited above we have dd_freq <= state->period,
+ * so this cannot overflow.
+ */
+ dd_freq = mul_u64_u64_div_u64(clk_rate, state->period, (u64)SP7021_PWM_FREQ_SCALER
+ * NSEC_PER_SEC);
+
+ if (dd_freq == 0)
+ return -EINVAL;
+
+ if (dd_freq > SP7021_PWM_FREQ_MAX)
+ dd_freq = SP7021_PWM_FREQ_MAX;
+
+ writel(dd_freq, priv->base + SP7021_PWM_FREQ(pwm->hwpwm));
+
+ /* cal and set pwm duty */
+ mode0 = readl(priv->base + SP7021_PWM_MODE0);
+ mode0 |= SP7021_PWM_MODE0_PWMEN(pwm->hwpwm);
+ mode1 = readl(priv->base + SP7021_PWM_MODE1);
+ mode1 |= SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm);
+ if (state->duty_cycle == state->period) {
+ /* PWM channel output = high */
+ mode0 |= SP7021_PWM_MODE0_BYPASS(pwm->hwpwm);
+ duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | SP7021_PWM_DUTY_MAX;
+ } else {
+ mode0 &= ~SP7021_PWM_MODE0_BYPASS(pwm->hwpwm);
+ /*
+ * duty_ns <= period_ns 27 bits, clk_rate 28 bits, won't overflow.
+ */
+ duty = mul_u64_u64_div_u64(state->duty_cycle, clk_rate,
+ (u64)dd_freq * NSEC_PER_SEC);
+ duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | duty;
+ }
+ writel(duty, priv->base + SP7021_PWM_DUTY(pwm->hwpwm));
+ writel(mode1, priv->base + SP7021_PWM_MODE1);
+ writel(mode0, priv->base + SP7021_PWM_MODE0);
+
+ return 0;
+}
+
+static void sunplus_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct sunplus_pwm *priv = to_sunplus_pwm(chip);
+ u32 mode0, dd_freq, duty;
+ u64 clk_rate;
+
+ mode0 = readl(priv->base + SP7021_PWM_MODE0);
+
+ if (mode0 & BIT(pwm->hwpwm)) {
+ clk_rate = clk_get_rate(priv->clk);
+ dd_freq = readl(priv->base + SP7021_PWM_FREQ(pwm->hwpwm));
+ duty = readl(priv->base + SP7021_PWM_DUTY(pwm->hwpwm));
+ duty = FIELD_GET(SP7021_PWM_DUTY_MASK, duty);
+ /*
+ * dd_freq 16 bits, SP7021_PWM_FREQ_SCALER 8 bits
+ * NSEC_PER_SEC 30 bits, won't overflow.
+ */
+ state->period = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)SP7021_PWM_FREQ_SCALER
+ * NSEC_PER_SEC, clk_rate);
+ /*
+ * dd_freq 16 bits, duty 8 bits, NSEC_PER_SEC 30 bits, won't overflow.
+ */
+ state->duty_cycle = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)duty * NSEC_PER_SEC,
+ clk_rate);
+ state->enabled = true;
+ } else {
+ state->enabled = false;
+ }
+
+ state->polarity = PWM_POLARITY_NORMAL;
+}
+
+static const struct pwm_ops sunplus_pwm_ops = {
+ .apply = sunplus_pwm_apply,
+ .get_state = sunplus_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static void sunplus_pwm_clk_release(void *data)
+{
+ struct clk *clk = data;
+
+ clk_disable_unprepare(clk);
+}
+
+static int sunplus_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sunplus_pwm *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk),
+ "get pwm clock failed\n");
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, sunplus_pwm_clk_release, priv->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to release clock: %d\n", ret);
+ return ret;
+ }
+
+ priv->chip.dev = dev;
+ priv->chip.ops = &sunplus_pwm_ops;
+ priv->chip.npwm = SP7021_PWM_NUM;
+
+ ret = devm_pwmchip_add(dev, &priv->chip);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Cannot register sunplus PWM\n");
+
+ return 0;
+}
+
+static const struct of_device_id sunplus_pwm_of_match[] = {
+ { .compatible = "sunplus,sp7021-pwm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sunplus_pwm_of_match);
+
+static struct platform_driver sunplus_pwm_driver = {
+ .probe = sunplus_pwm_probe,
+ .driver = {
+ .name = "sunplus-pwm",
+ .of_match_table = sunplus_pwm_of_match,
+ },
+};
+module_platform_driver(sunplus_pwm_driver);
+
+MODULE_DESCRIPTION("Sunplus SoC PWM Driver");
+MODULE_AUTHOR("Hammer Hsieh <hammerh0314@gmail.com>");
+MODULE_LICENSE("GPL");
--
2.7.4
\
 
 \ /
  Last update: 2022-03-22 11:44    [W:0.084 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site